GB/T 13145-2018 English PDFUS$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13145-2018: Specification and management requirements of the stacking yard for refrigerated containers Status: Valid GB/T 13145: Historical versions
Basic dataStandard ID: GB/T 13145-2018 (GB/T13145-2018)Description (Translated English): Specification and management requirements of the stacking yard for refrigerated containers Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A85 Classification of International Standard: 55.180.10 Word Count Estimation: 14,129 Date of Issue: 2018-03-15 Date of Implementation: 2018-10-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 13145-2018: Specification and management requirements of the stacking yard for refrigerated containers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Specification and management requirements of the stacking yard for refrigerated containers ICS 55.180.10 A85 National Standards of People's Republic of China Replacing GB/T 13145-1991 Refrigerated container yard technical management requirements Published by.2018-03-15 2018-10-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration released Directory Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Technical Requirements 2 Appendix A (Normative) Reefer Entry Inspection Content 8 ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 13145-1991 "Mechanical refrigerated container yard technical management requirements." Compared with GB/T 13145-1991, the main technical changes except editorial modification are as follows. --- Added 1EEE, 1EE, 1AAA refrigerated containers (see Chapter 1, 4.1.4.5); --- Added the content of the fixed power supply bracket [see 3.4, 4.1.3.3b), 4.1.4.7, 4.1.4.8b)]; --- Increased the requirement for reserved 220V power supply for maintenance [see 4.1.3.2c)]; --- Increased emergency power facility configuration requirements at power failure (see 4.1.3.5); --- Increased requirements for setting up dedicated substations (see 4.1.4.6); --- Added the principle requirement for establishing a reefer management system [see 4.2.1b)]; --- Increased technical requirements for entry and exit [see 4.2.2d), 4.2.2e), 4.2.2f)]; --- Increased time requirements for power interruption and power restoration [see 4.2.2f)]; --- Increased the requirements for checking the display temperature of the electronic display when entering the market (see A.2); --- Modify the number of high-level reefer stacks (see 4.1.1.3,.1991 version 4.1.5.3); --- Modify the configuration requirements for mobile inspection and maintenance facilities (see 4.1.5.3,.1991 version 4.1.5.3); --- Removed the content with conversion plug (see version 4.1.3.5 of the.1991 edition); --- Removed content related to water-cooled containers (see 4.1.5.2 of the.1991 edition); --- Deleted the contents of the original temperature records in Appendix A (see A.1, A.2, A.3 in the.1991 edition); --- Deleted Appendix B (see Appendix B of the.1991 edition). This standard is proposed and managed by the National Container Standardization Technical Committee (SAC/TC6). Drafting organizations of this standard. Shanghai Maritime University, Shanghai International Port (Group) Co., Ltd., Anhui Hanjiang Logistics (Group) Co., Ltd. Co., Ltd., Guangzhou Port Group Co., Ltd., Shenzhen Institute of Standards and Technology, Ministry of Transport, Water Transport Institute. The main drafters of this standard are. Hu Meifen, Wu Shangang, Wang Hao, Cheng Meisheng, Wei Guoxing, Li Yuanhong, Chai Wei, Wen Jun, Zhang Yuling, Wang Ji, Xu Wei, Zhu Wenfeng, Liu Dongzhe. The previous versions of the standard replaced by this standard are. --- GB/T 13145-1991. Refrigerated container yard technical management requirements1 ScopeThis standard specifies the technical management requirements for mechanical refrigerated container yards. This standard applies to the special repositories for refrigerated containers set up by ports and transfer stations. Other types of refrigerated containers use. The yard specified in this standard is suitable for the storage of 1EEE, 1EE, 1AAA, 1AA, 1A, 1CC and 1C mechanical refrigerated containers, but Not suitable for mechanical refrigerated containers loaded with dangerous goods.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 7392 Series 1. Technical Requirements and Test Methods for Containers Thermal Containers GB/T 11601 Container Inbound and Outbound Stations Checking Handover Requirements JTS144-1-2010 Port Engineering Load Specification JTS165-2013 Overall Design Specification for Seaport3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Plane standard container planerslotofstandardcontainer The area occupied by a 1CC container on the yard is 2438mm x 6058mm. 3.2 Central monitoring of remotemonitoring In a certain way, the operating conditions and the temperature of the refrigerating container refrigeration unit on the yard are displayed to a concentration near the yard Locations are displayed in graphics, numbers, lights, sounds, and prints. 3.3 Freezer dedicated stackingyardforrefrigeratedcontainers There are more than 50 plane standard boxes, and the shape of the venues is regular. They are connected in one piece and have fixed power supply facilities. The conditions of the refrigerated container dedicated space. 3.4 Power stand powerstand;powersupport A power outlet and local lighting equipment are installed for the related personnel to perform the operations of plugging in the power supply, as well as inspection, inspection, and maintenance of refrigerated containers. The special bracket for the box. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13145-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 13145-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13145-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13145-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 13145-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13145-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
