GB/T 12310-2012 English PDFUS$529.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 12310-2012: Sensory analysis method -- Paired comparison test Status: Valid GB/T 12310: Historical versions
Basic dataStandard ID: GB/T 12310-2012 (GB/T12310-2012)Description (Translated English): Sensory analysis method -- Paired comparison test Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B04 Classification of International Standard: 67.240 Word Count Estimation: 23,249 Older Standard (superseded by this standard): GB/T 12310-1990 Quoted Standard: GB/T 10220; GB/T 10221; GB/T 13868; GB/T 16291.1; GB/T 16291.2 Adopted Standard: ISO 5495-2005, MOD Regulation (derived from): National Standards Bulletin No. 13 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies two product samples to determine characteristic strength exists between the sensory perceptible sensory difference or similar procedures. This standard applies to a single characteristic or several characteristics of sensory differ GB/T 12310-2012: Sensory analysis method -- Paired comparison test---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Sensory analysis method. Paired comparison test ICS 67.240 B04 National Standards of People's Republic of China Replacing GB/T 12310-1990 Sensory analysis Pairwise comparison test (ISO 5495.2005, Sensoryanalysis-Methodology- Pairedcomparisontest, MOD) Issued on. 2012-06-29 2012-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Principle 2 Test conditions 3 5 6 3 reviewers 7 Program 4 8 Analysis and Expression 4 9 inspection reports 5 10 Precision and Bias 5 Appendix A (normative) Pairwise comparison test of the minimum required number of correct answers and the number of assessors 6 Annex B (informative) Example 13 References 19ForewordThis standard is based on GB/T 1.1-2009 given rule drafting. This standard replaces GB/T 12310-1990 "Sensory Analysis pairwise comparison test", compared with the GB/T 12310-1990, which The main technical changes are as follows. --- Increased inspection procedures and some examples of similar description (see Chapter 1); --- Added "Terms and Definitions", "principle", "assessors" (see Chapter 3, Chapter 4 and Chapter 6); --- Remove the "Method Synopsis", "equipment" and "sampling" (see the 1990 edition of Chapter 3, Chapter 4 and Chapter 5); --- "General Test Conditions" the conditions will be specifically itemized (see Chapter 5), rather than reference to other standards (see the 1990 edition Chapter 6); this chapter deleted the evaluators requirements, but as detailed in a separate article (see Chapter 6); --- "Test step", "results presentation and interpretation" (see the 1990 edition of Chapters 7 and 8) is changed to "Programs", "Analysis and The expression "and (see Chapters 7 and 8); --- Added "precision and bias" (see Chapter 10); --- Appendix A, Appendix B to delete "answer format," adds statistical tables and examples. This revised standard adopts ISO 5495.2005 "Sensory analysis Methodology pairwise comparison test" (in English). And ISO 5495. Compared to 2005, this standard has been adjusted technical differences, specific adjustments are as follows. a) on "Normative references". --- With GB/T 10220 replaces ISO 6658. 1985; --- With GB/T 10221 replaces ISO 5492.1992; --- With GB/T 13868 replaces ISO 8589. 1988; --- With GB/T 14195 replaces ISO 8586-1.1993; --- With GB/T 16291.2 replaces ISO 8586-2.1994. b) Delete the ISO standard foreword, preface increased our standards. c) in the "1" and examples of Figure 1 in Appendix Edit B. d) ISO standard 3.7 "consensus answer bilateral test for the highest value selecting samples A and B the number of assessors" and 8.1.1 "Delete last sentence beginning 'inconclusive'" technical corrections included in standard text. This standard is proposed and managed by the People's Republic of China Ministry of Agriculture. This standard was drafted. Quality Standards and Testing Institute of Agricultural Technology Chinese Academy of Agricultural Sciences, the Ministry of Agriculture Food Quality Supervision and Testing Center (Jinan). The main drafters. Zhang prop spring, Xiao Lu, Ren Fengshan, money Yongzhong, Wang, Zhu Zhihua, Mao Xuefei, Zhaoping Juan, Wang Lei, Wu Wei. This standard replaces the standards previously issued as follows. --- GB/T 12310-1990. Sensory analysis Pairwise comparison test1 ScopeThis standard specifies the determination sensory perceptible difference or similar program between the two sample product organoleptic characteristics strength exists. Note. This test is also sometimes referred to as directional difference test or 2-AFC test (alternative forced-choice test). Pairwise comparison test is essentially forcing a second election Select test. Because it involves only two products, paired comparison test is the simplest existing classification test. This standard applies to single organoleptic properties or characteristics of several differences exist, it refers to a known characteristics to determine whether the presence of the senses And identify differences in the range of difference, but it does not give the extent of the differences explained. No differences in characteristics evaluation does not mean that the two products do not exist any What difference. This standard applies only to a relatively uniform homogeneous product. This standard applies to the following. a) determining --- If there feel the difference (paired difference test); --- If there is no sense of difference (paired similarity test), for example, when the ingredients, technology, packaging, handling or storage improvements. b) Preferably, training and inspection assessor Should know before carrying out inspection, testing unilateral inspection (inspection supervisor know in advance the difference between the scope and the alternative hypothesis is equivalent to the expected range Inner circle differences exist) or bilateral inspection (inspection supervisor in advance do not know the difference between covering, and the alternative hypothesis is equivalent to one or the other Within a range of external differences exist). Paired test also applies to the comparison of the two products according to preference. Paired difference test case shown in Figure B.1. Note. This standard is only used for non-preference test.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 10220 Sensory analysis Subjects (GB/T 10220-2012, ISO 6658.2005, IDT) GB/T 10221 Sensory analysis terminology (GB/T 10221-2012, ISO 5492.2008, MOD) GB/T 13868 Sensory analysis sensory analysis laboratory to establish general guidelines (GB/T 13868-2009, ISO 8589.2007, IDT) GB/T 16291.1 sensory analysis selection, training and monitoring of assessors General guidance Part 1. selected assessors (GB/T 16291.1-2012, ISO 8586-1.1993, MOD) GB/T 16291.2 sensory analysis selection, training and monitoring of assessors general guidelines - Part 2. Expert reviewers (GB/T 16291.2-2010, ISO 8586-2.2008, IDT)3 Terms and DefinitionsGB/T 10221 and defined by the following terms and definitions apply to this document. 3.1 α- risk alpha-risk When there is no difference between the senses, to infer the probability of sensory differences exist. Note. This is also known as Type Ⅰ error, significance level or false positive rate. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 12310-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 12310-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 12310-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 12310-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 12310-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12310-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
