GB/T 12085.11-2022 English PDFUS$269.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 12085.11-2022: Optics and photonics - Environmental test methods - Part 11: Mould growth Status: Valid GB/T 12085.11: Historical versions
Basic dataStandard ID: GB/T 12085.11-2022 (GB/T12085.11-2022)Description (Translated English): Optics and photonics - Environmental test methods - Part 11: Mould growth Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N30 Classification of International Standard: 37.020 Word Count Estimation: 14,116 Date of Issue: 2022-10-14 Date of Implementation: 2023-05-01 Older Standard (superseded by this standard): GB/T 12085.11-2010 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 12085.11-2022: Optics and photonics - Environmental test methods - Part 11: Mould growth---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Optics and photonics -- Environmental test methods -- Part 11.Mould growth ICS 37.020 CCSN30 National Standards of People's Republic of China Replacing GB/T 12085.11-2010 Optical and Photonics Environmental Test Methods Part 11.Mildew Part 11.Mouldgrowth (ISO 9022-11.2015, MOD) Published on 2022-10-12 2023-05-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface I Introduction III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Test conditions 1 5 Condition test 4 6 Test procedure 5 7 Environmental test mark 6 8 Specification 6 Appendix A (Informative) Selection of Molds and Fungicides 7 Reference 9 forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is part 11 of GB/T 12085 "Environmental test methods for optics and photonics". GB/T 12085 has been released to the next part. --- Part 1.Terminology, test scope; --- Part 2.Low temperature, high temperature, damp heat; --- Part 3.Mechanical forces; --- Part 4.Salt spray; --- Part 6.Sand and dust; --- Part 7.Dripping water and rain; --- Part 8.High internal pressure, low internal pressure, immersion; --- Part 9.Solar radiation and weathering; --- Part 11.Mildew; --- Part 12.Pollution; --- Part 14.Dew, frost, ice; --- Part 17.Comprehensive test of pollution and solar radiation; --- Part 20.Moist air containing sulfur dioxide and hydrogen sulfide; --- Part 22.Comprehensive test of low temperature, high temperature or temperature change and impact or random vibration; --- Part 23.Comprehensive test of low pressure and low temperature, atmospheric temperature, high temperature or damp heat. This document replaces GB/T 12085.11-2010 "Environmental Test Methods for Optical and Optical Instruments - Part 11.Mildew Growth". and Compared with GB/T 12085.11-2010, in addition to structural adjustment and editorial changes, the main technical changes are as follows. --- Change "optical instruments" in the full text to "optical and photonics instruments"; --- Changed the applicable boundaries of "scope" (see Chapter 1, Chapter 1 of the.2010 edition); --- Changed the content of the environmental test mark (see Chapter 7, Chapter 6 of the.2010 edition). This document is modified using ISO 9022-11.2015 "Environmental test methods for optics and photonics - Part 11.Mildew growth". This document has the following structural adjustments compared to ISO 9022-11.2015. --- Added "Terms and Definitions" chapter; ---4.3.1 and 4.3.2 correspond to 3.3 in ISO 9022-11.2015. The technical differences between this document and ISO 9022-11.2015 and their reasons are as follows. --- Change "optical instrument" in the full text to "optical and photonics instrument" to meet the requirements of the application field of the optical industry; --- Replace ISO 9022-1 (see 6.1, Chapter 7) with the normatively cited GB/T 12085.1 to adapt to the technical conditions of our country, Improve operability. The following editorial changes have been made to this document. --- In Chapter 7, ISO 9022 is replaced by GB/T 12085 (all parts) cited for information. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Optical and Photonics Standardization Technical Committee (SAC/TC103). This document is drafted by. Nanjing Donglilai Optoelectronics Industry Co., Ltd., Tianjin Aerospace Ruilai Technology Co., Ltd., Guangzhou Yuexian Optics Instrument Co., Ltd., University of Shanghai for Science and Technology, Shanghai Xiongbo Precision Instrument Co., Ltd., Ningbo Zhanjing Optical Instrument Co., Ltd., Suzhou Huili Instrument Co., Ltd., Wuzhou Aoka Optical Instrument Co., Ltd., Microaudie Industrial Group Co., Ltd., Shanghai VSI Ruiguang Electric Technology Co., Ltd., Ningbo Teaching Instrument Co., Ltd., Ningbo Sunny Instrument Co., Ltd., Ningbo Yongxin Optical Co., Ltd., Nanjing Jiangnan Yongxin Optical Co., Ltd., Shanghai Qianxin Instrument Co., Ltd., Shanghai Optical Instrument Research Institute, Ningbo Huaguang Precision Instrument Co., Ltd. The main drafters of this document. Hong Yiping, Li Xing, Li Migao, Zhang Wei, Jiang Guanxiang, Gan Linchao, Han Sen, Zhang Tao, Yang Zesheng, Wang Weisheng, Wang Guorui, Hu Senhu, Cui Zhiying, Yao Chen, Hua Yue, Feng Qionghui, Kong Yanbo. The previous versions of this document and its superseded documents are as follows. ---First published in 1989 as GB 12085.11-1989, first revised in.2010; ---This is the second revision.IntroductionOptical and photonic instruments are widely used in various fields of national economy and international science and technology, due to the very complex environmental conditions of their use and transportation. There are various environmental conditions, such as physical, chemical, biological, climatic and electrical, which will make optical and photonic instruments The performance of the device has changed and it cannot function properly. In view of the above reasons, in order to ensure the quality of optical and photonics instrument products, it is necessary to simulate a variety of complex changes in environmental conditions. It is necessary to conduct tests on optical and photonics instrument products to assess their ability to withstand harsh environmental conditions, so GB/T 12085 includes test conditions, Conditional tests, test procedures, environmental test markings, etc. At the same time, since there are many environmental conditions and they belong to different types, in order to facilitate the For the implementation of the standard, GB/T 12085 is to be divided into 15 parts according to the type of environmental conditions. --- Part 1.Terminology, test scope. The purpose is to unify the terms and definitions of environmental test methods, test procedures and environmental tests mark. --- Part 2.Low temperature, high temperature, damp heat. The purpose is to study the optical, climatic, mechanical, chemical and electrical (including electrostatic) of the sample The degree to which properties such as these are affected by temperature and humidity. --- Part 3.Mechanical forces. The purpose is to study the optical, climatic, mechanical, chemical and electrical (including electrostatic) properties of the sample. The degree to which sex is affected by mechanical forces. --- Part 4.Salt spray. The purpose is to evaluate the ability of the instrument surface and protective coating (plating) to resist salt spray. --- Part 6.Sand and dust. The purpose is to study the optical, climatic, mechanical, chemical and electrical (including electrostatic) properties of the sample by The degree of variation in the effects of sand and dust. --- Part 7.dripping, raining. The purpose is to study the optical, climatic, mechanical, chemical and electrical (including electrostatic) properties of the sample The degree of change affected by dripping water and rain. --- Part 8.High internal pressure, low internal pressure, immersion. The purpose is to study the optical, climatic, mechanical, chemical and electrical (including static The degree to which properties such as electricity are affected by high pressure, low pressure, or immersion in the ambient gas. --- Part 9.Solar radiation and weathering. The purpose is to study the optical, climatic, mechanical, chemical and electrical (including electrostatic) of the sample The degree to which properties such as these are affected by solar radiation or wind energy (solar exposure, damp heat). --- Part 11.Mildew. The purpose is to study the optical, climatic, mechanical, chemical and electrical (including electrostatic) properties of the sample by The degree of influence of mold growth, and evaluation of mold metabolites (such as enzymes or acids) cause corrosion of parts or cause Severity of circuit board short circuit, etc. --- Part 12.Pollution. The purpose is to study instruments, especially instrument surfaces, coatings or composite materials exposed to short-term exposure to Resistance in reagents. --- Part 14.Dew, frost, ice. The purpose is to study the optical, climatic, mechanical, chemical and electrical (including electrostatic) properties of the sample Degree of exposure to dew, frost, and ice. --- Part 17.Pollution, solar radiation comprehensive test. The purpose is to study the instrument, especially the surface, coating or composite material of the instrument The material is resistant to corrosion by reagents and solar radiation in a short time. --- Part 20.Moist air containing sulfur dioxide and hydrogen sulfide. The purpose is to study the optical, climatic, mechanical, chemical and electrical properties of the sample Properties such as gas (including static electricity) are affected by sulfur dioxide or hydrogen sulfide. --- Part 22.Comprehensive test for low temperature, high temperature or temperature change and impact or random vibration. The purpose is to study the optical, Climatic, mechanical, chemical and electrical (including electrostatic) properties subject to combined low temperature, high temperature or temperature variation with impact or random vibration the degree of change in the impact. --- Part 23.Comprehensive test of low pressure and low temperature, atmospheric temperature, high temperature or damp heat. The purpose is to study the optics, climate, The degree to which mechanical, chemical and electrical (including electrostatic) performance characteristics are affected by a combination of low and low, ambient or elevated temperatures. Optical and Photonics Environmental Test Methods Part 11.Mildew1 ScopeThis document describes the environmental test method for the optical and photonic mold growth test. This document applies to optical and photonic instruments, including components from other fields such as mechanical, chemical and electronic equipment. test. This document does not apply to routine production inspections.2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 12085.1 Optical and Photonics Environmental Test Methods Part 1.Terminology, Test Scope (GB/T 12085.1- 2022, ISO 9022-1.2016, MOD)3 Terms and DefinitionsThere are no terms and definitions that need to be defined in this document.4 Test conditions4.1 Test strains The common bacterial species on the surface of optical lenses are shown in Table 1, including algal fungi, intermedium fungi and xerophytic fungi. Table 1 Type of serial number1 Aspergillus niger2 Aspergillus flavus3 Aspergillus versicolor4 Trichoderma viride5 Penicillium6 Penicillium citrinum7 Paecilomyces8 balls of Chaetomium......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 12085.11-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 12085.11-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 12085.11-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 12085.11-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 12085.11-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12085.11-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
