GB/T 11716-2018 English PDFUS$89.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 11716-2018: Logs of small diameter Status: Valid GB/T 11716: Historical versions
Basic dataStandard ID: GB/T 11716-2018 (GB/T11716-2018)Description (Translated English): Logs of small diameter Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B68 Classification of International Standard: 79.040 Word Count Estimation: 4,496 Date of Issue: 2018-05-14 Date of Implementation: 2018-12-01 Older Standard (superseded by this standard): GB/T 11716-2009 Regulation (derived from): National Standards Announcement No. 6 of 2018 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 11716-2018: Logs of small diameter---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.(Trail logs) ICS 79.040 B68 National Standards of People's Republic of China Replace GB/T 11716-2009 Trail log Published on.2018-05-14 2018-12-01 implementation State market supervision and administration China National Standardization Administration issued ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 11716-2009 "small path logs". The main technical changes compared with GB/T 11716-2009 as follows. --- Revised the normative reference document (see Chapter 2); --- Added terms and definitions (see Chapter 3); --- Revised the gauge diameter requirements (see 4.2.3); --- Revised the allowable limit of heartwood decay defects (see 4.3); --- Revised the allowable limit of insect eye defects (see 4.3); --- Modified the bending method (see 4.3); --- Modify the allowable limit of bending defects (see 4.3); --- Increased requirements for inspection tools (see Chapter 5); --- Removed Appendix A (see 4.3 of.2009 edition). This standard was proposed by the National Forestry and Grassland Bureau. This standard is under the jurisdiction of the National Timber Standardization Technical Committee (SAC/TC41). This standard was drafted. Heilongjiang Institute of Wood Science, Heilongjiang Academy of Forestry, Heilongjiang Provincial Forest Industry Bureau, Fujian Province Wood Inspection Technology Association. The main drafters of this standard. Li Xiaoxiu, Li Gang, Huang Haijiao, He Lin, Liu Qi, Wu Xinyu, Liang Yuxiang, Luo Yuliang, Luo Xu, Feng Yanbin, Deng Xiaohua, Kong Qingzi, Ding Yan, Yang Hongyi, Xie Xihua. The previous versions of the standards replaced by this standard are. ---GB/T 11716-1989, GB/T 11716-1999, GB/T 11716-2009. Trail log1 ScopeThis standard specifies the terms and definitions, requirements, inspection tools, sampling and determination methods, inspection methods, volume calculations and production of small-diameter logs. Product logo. This standard applies to the field of wood production and circulation, and is also applicable to agriculture, light industry, handicraft wood products and other wood materials for civilian needs.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 144 log inspection GB/T 155 log defect GB/T 4814 original wood product table GB/T 15787 Log Inspection Terminology GB/T 17659.1 Sawmills for batch inspection and sampling - Part 1 . Methods and methods LY/T 1511 Log Product Marking3 Terms and definitionsThe terms and definitions defined in GB/T 155 and GB/T 15787 apply to this document.4 requirements4.1 Tree species All coniferous and broadleaf species. 4.2 Dimensions and tolerances 4.2.1 Length of gauge. 2m~6m, upgraded by 0.2m. 4.2.2 Long-term tolerance. 6-2cm. 4.2.3 Measured diameter. 4cm~13cm, upgraded by 1cm, when the size is less than 1cm, the foot is 0.5cm, and less than 0.5cm. 4.3 Limits of defect tolerance The allowable limits of defects shall comply with the requirements of Table 1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11716-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 11716-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 11716-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11716-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 11716-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11716-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
