GB/T 11101-2020 PDF EnglishUS$145.00 · In stock · Download in 9 seconds
GB/T 11101-2020: Cemented carbide blanks for round rods Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 11101: Historical versions
Similar standardsGB/T 11101-2020: Cemented carbide blanks for round rods---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT11101-2020NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.160 H 72 Replacing GB/T 11101-2009 Cemented Carbide Blanks for Round Rods ISSUED ON: MARCH 06, 2020 IMPLEMENTED ON: FEBRUARY 01, 2021 Issued by: State Administration for Market Regulation; Standardization Administration of PRC. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative References ... 4 3 Requirements ... 4 4 Test Methods ... 7 5 Inspection Rules ... 7 6 Marking, Packaging, Transportation, Storage and Quality Certificates ... 8 7 Contents of Contract (or Purchase Order) ... 9ForewordThis Standard was drafted as per the rules specified in GB/T 1.1-2009. This Standard replaced GB/T 11101-2009 Cemented Carbide Blanks for Round Rods. Compared with GB/T 11101-2009, this Standard made the major technical changes as follows besides the editorial modifications: --- Delete "printed circuit board microdrill" in the scope (see Clause 1 of 2009 Edition); --- Delete the relevant requirements for "round rods for printed circuit board microdrill" (see Clause 3 of 2009 Edition); --- Modify "model representation rules" into "marking example" (see 3.1.2 of this Edition; 3.2 of 2009 Edition); --- Confirm physical and mechanical properties, microstructure requirements (see 3.3 of this Edition; 3.4 of 2009 Edition); --- Modify "model and size" into "size and shape"; and revise the relevant requirements (see 3.4 of this Edition; 3.5 of 2009 Edition). This Standard was proposed by China Nonferrous Metals Industry Association. This Standard shall be under the jurisdiction of National Technical Committee for Standardization of Nonferrous Metals (SAC/TC 243). Drafting organizations of this Standard: Xiamen Golden Egret Special Alloy Co., Ltd.; Zigong Cemented Carbide Co., Ltd.; Zhuzhou Cemented Carbide Group Co., Ltd.; Shenzhen Zhucheng Science & Technology Co., Ltd.; and Nanchang Cemented Carbide Limited Liability Company. Chief drafting staffs of this Standard: Jiang Tao, Zou Jianping, Chen Chengyi, Fan Zhirui, Li Yunlong, Jiang Yuanxiang, Liao Jun, Liu Tiemei, Zhang Yue, Yang ligeng, and Wu Aihua. The historical editions replaced by this Standard are as follows: --- GB/T 11101-1989, GB/T 11101-2009. Cemented Carbide Blanks for Round Rods1 ScopeThis Standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificates, and contract (or purchase order) content of cemented carbide blanks for round rods. This Standard is applicable to cemented carbide blanks for round rods for cutting tools, stamping tools and wear-resistant measuring tools.2 Normative ReferencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document. GB/T 5242 Check Rules and Test Methods of Cemented Carbide Products GB/T 5243 Marking, Packing, Transport and Storage of Cemented Carbide Products3 Requirements3.1 Schematic diagram and marking example 3.1.1 Product schematic diagram The product schematic diagram can refer to Figure 1. Table 6 Unit: mm4 Test Methods4.1 The chemical composition of the product shall be analyzed in accordance with the provisions of GB/T 5242, or determined by negotiation between the supplier and the purchaser. 4.2 The physical and mechanical properties and the microstructure of the product shall be inspected in accordance with the provisions of GB/T 5242, or determined by negotiation between the supplier and the purchaser. 4.3 The size and shape of the product shall be inspected in accordance with the provisions of GB/T 5242. 4.4 The appearance quality of the product shall be inspected in accordance with the provisions of GB/T5242.5 Inspection Rules5.1 Inspection and acceptance 5.1.1 The product shall be inspected by the supplier to ensure that the product complies with the requirements of this Standard and the contract (or purchase order), and fill in the quality certificate. 5.1.2 The purchaser can inspect the received products according to the provisions of this Standard. If the inspection results are inconsistent with the provisions of this Standard and the contract (or purchase order), it shall be submitted within 3 months from the date of receipt of the products; it shall be resolved through consultation between the supplier and the purchaser. If arbitration is required, arbitration sampling shall be conducted by both supplier and purchaser on the purchaser site. 5.2 Batching Products should be submitted for inspection in batches; and each batch of products should consist of products with the same chemical composition and the same specifications. Diameter Allowable value for the length and width of the edge-dropping or corner-dropping Allowable value for the depth of the edge- dropping or corner-dropping ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 11101-2020 be delivered?Answer: The full copy PDF of English version of GB/T 11101-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 11101-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11101-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 11101-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 11101-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11101-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 11101-2020?A step-by-step guide to download PDF of GB/T 11101-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 11101-2020". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
