GB/T 11086-2013 English PDFUS$629.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 11086-2013: Copper and copper alloys -- Terms and definitions Status: Valid GB/T 11086: Historical versions
Basic dataStandard ID: GB/T 11086-2013 (GB/T11086-2013)Description (Translated English): Copper and copper alloys -- Terms and definitions Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H62 Classification of International Standard: 77.150.30 Word Count Estimation: 27,276 Older Standard (superseded by this standard): GB/T 11086-1989 Adopted Standard: ISO 197-1-1983, MOD; ISO 197-2-1983, MOD; ISO 197-3-1983, MOD; ISO 197-4-1983, MOD; ISO 197-5-1980, MOD; Regulation (derived from): National Standards Bulletin No. 25 of 2013 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the copper and copper alloy materials, unprocessed products, terms and definitions processed products, production methods and heat treatment methods. This standard applies to copper and copper alloy products. GB/T 11086-2013: Copper and copper alloys -- Terms and definitions---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Copper and copper alloys. Terms and definitions ICS 77.150.30 H62 National Standards of People's Republic of China Replacing GB/T 11086-1989 Copper and copper alloys term (ISO 197-1 ~ ISO 197-4. 1983; ISO 197-5. 1980, Copperandcopperaloys-Termsanddefinitions, MOD) Issued on. 2013-12-17 2014-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Materials 2 Unprocessed products 4 3 Processed products 4 5 5 Production Method 10 6 heat treatment 12 Appendix A (informative) This standard reg number and ISO 197-1 ~ ISO 197-4. 1983 and ISO 197-5. 1980 reg No control 14 Index 17ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 11086-1989 "copper and copper alloys term." This standard compared with GB/T 11086-1989, the main changes as follows. --- Modify the standard structure of the original standards. --- General terms and definitions, increasing the free cutting alloy, copper and copper alloy regeneration definitions of terms; --- Unrefined copper added definitions of terms anode copper to matte, blister copper, the definition of black copper was modified; --- Deleted refined copper in the copper, oxygen-free copper, definitions of terms deoxidized copper, tough pitch copper; --- Materials increased copper and copper alloy portion, which increases the copper, oxygen-free copper, deoxidized copper, tough pitch copper, copper micro-alloyed, dispersion Copper, copper alloy, high definition of the term; --- Brass (an alloy of copper and zinc), bronze, copper-nickel alloy (copper-nickel alloy) definitions of terms were modified, deleted the term special copper alloys definition; --- Part of the original cast into standard unprocessed products; --- Unprocessed products increased copper cathode, Definition plaster mold castings; --- Added processed products seamless pipe, welded pipe, coil, inner grooved tube, finned tube, plastic coated copper tube, sheet, plate intraoperative Definition of Terms; --- Of pipe, bar, wire definitions were modified; --- Of sheet, strip, foil thickness to define the scope has been modified; --- The refining method into the production process, the EW modify electrolytic deposition; --- Production process increases the casting, continuous casting, semi-continuous casting, sand casting, die casting (die casting), centrifugal casting, Die casting, low pressure casting, investment casting, die casting plaster casting methods to define these terms; --- Production process increases the drawing, extrusion, rolling, welding, forging, continuous extrusion processing method definitions of these terms; --- Hot working, cold working definitions of the terms were modified; --- In the heat treatment to remove the aging, artificial aging, natural aging, solution treatment and artificial aging (complete heat treatment), quenching technique language. Increase the recrystallization annealing, softening annealing, metastable heat treatment, quench hardening, tempering, quenching and tempering treatment, strengthening ordered online Yu Terms and definitions thermal quenching; --- Definition of annealing, precipitation heat treatment has been modified. This revised standard adopts ISO 197-1. 1983 "Copper and copper alloys - Terms and definitions - Part 1. Materials", ISO 197-2. 1983 "Copper and copper alloys - Terms and definitions - Part 2. Not processing products (Refinery shapes)", ISO 197-3. 1983 "Copper and copper alloys - Terms And definitions - Part 3. processed products ", ISO 197-4. 1983" Copper and copper alloys - Terms and definitions - Part 4. Casting " ISO 197-5. 1980 "Copper and copper alloys - Terms and definitions - Part 5. processing and treatment." This standard and ISO 197-1. 1983, ISO 197-2. 1983, ISO 197-3. 1983, ISO 197-4. 1983, ISO 197-5. 1980 to modify the degree of consistency. It is easier than Representing, in information listed in the appendix of this standard clauses and controls list corresponding chapter of the international standards. The standard in the use of international standards, has been modified, a single vertical line identifies these differences in their terms involved margins Place. This standard and ISO 197-1. 1983, ISO 197-2. 1983, ISO 197-3. 1983, ISO 197-4. 1983, ISO 197-5. 1980 Phase Ratio, the main differences are as follows. --- Changes in the structure of the standard ISO standard will change some terms to apply to our standard formulation; --- General terms and definitions, increasing the base metal element, cutting alloys, copper and copper alloy regeneration definitions of terms; --- Unrefined copper added definitions of terms anode copper to matte, blister copper, the definition of black copper was modified; --- Removed in refined copper electrolytic copper, oxygen-free copper, definitions of terms deoxidized copper, tough pitch copper; --- Classification of copper and copper alloys were changed, removed copper, copper alloy unrefined definitions of terms, an increase of copper, oxygen-free copper, Deoxidized copper, tough pitch copper, copper micro-alloyed, diffusion of copper, copper alloy, high definition of the term; --- Brass (an alloy of copper and zinc), bronze, copper-nickel alloy (copper-nickel alloy) definitions of terms have been changed, removed the term special copper alloys definition; --- The ISO standard part into the casting unprocessed products; --- Unprocessed products increased Definition plaster mold castings; --- Added processed products seamless pipe, welded pipe, coil, inner grooved tube, finned tube, plastic coated copper tube, sheet, plate intraoperative Definition of Terms; --- Of pipe, bar, wire rod were defined change; --- Of sheet, strip, foil thickness defining the scope of the change; --- The refining method into the production process; --- Production process increases the casting, continuous casting, semi-continuous casting, sand casting, die casting (die casting), centrifugal casting, Die casting, low pressure casting, investment casting, die casting plaster casting methods to define these terms; --- Production process increases the drawing, extrusion, rolling, welding, forging, continuous extrusion processing method definitions of these terms; --- Definition of thermal processing, cold were changes; --- Removed aging, artificial aging, natural aging, solution treatment and artificial aging (complete heat treatment) in the heat treatment, quenching technique language. Increase the recrystallization annealing, softening annealing, metastable heat treatment, quench hardening, tempering, quenching and tempering treatment, strengthening ordered online Yu Terms and definitions thermal quenching; --- Definition of annealing, precipitation heat treatment were changed. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard is drafted by. Chinalco Luoyang Copper Co., Jiangxi Copper Company Limited, Anhui Xinke New Materials Co. Shares the company. The main drafters of this standard. Zhu Yingli, Wang Junfeng, Li Gang, Ge calf, Ding Shunde, Zhou Shuqing, Mao Yiu Tung, Elohim, Yu Xiaolong, Wang Wenjun. This standard replaces the standards previously issued as follows. --- GB/T 11086-1989. Copper and copper alloys term1 ScopeThis standard specifies the copper and copper alloy materials, unprocessed products, the terms and definitions of processed products, production methods and heat treatment methods. This standard applies to copper and copper alloy products.2 Materials2.1 General terms and definitions 2.1.1 Alloy aloy By the matrix metal elements and alloys containing metallic elements and impurities in the material. 2.1.2 Base metal element basicmetalicelement Quality alloy metal dominant element. 2.1.3 Alloying elements aloyingelement For the metal has certain characteristics, added to the base metal or non-metallic element or metal element retained in the metals. 2.1.4 Impurity impurity Present in the metal, but not intentionally added or retained metal element or non-metallic elements. 2.1.5 Processing (deformation) alloy wroughtaloy Mainly used by heat, cold plastic deformation of the alloy production and processing of products. 2.1.6 Cast alloy castingaloy Mainly used in the production of alloy castings. 2.1.7 Master alloys masteraloy As an additive material added to the molten metal, for regulating or controlling the chemical composition of the alloy. 2.1.8 Heat-treatable (strengthened) alloy heat-treatablealoy The alloy is reinforced by appropriate heat treatment. 2.1.9 Non-heat-treated (strengthened) alloy non-heat-treatablealoy Only strengthened by cold working, the alloy can not substantially be enhanced by heat treatment. 2.1.10 Cutting alloy free-cuttingaloy By alloy composition and heat treatment design, easy to alloy machining. When the alloy is machined with a lower anti-cutting ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11086-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 11086-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 11086-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11086-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 11086-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11086-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
