GB/T 11017.3-2024 English PDFUS$439.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 11017.3-2024: Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 66 kV(Um=72.5 kV) and 110 kV(Um=126 kV) - Part 3: Accessories Status: Valid GB/T 11017.3: Historical versions
Basic dataStandard ID: GB/T 11017.3-2024 (GB/T11017.3-2024)Description (Translated English): Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 66 kV(Um=72.5 kV) and 110 kV(Um=126 kV) - Part 3: Accessories Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K13 Classification of International Standard: 29.060.20 Word Count Estimation: 22,249 Date of Issue: 2024-09-29 Date of Implementation: 2025-04-01 Older Standard (superseded by this standard): GB/T 11017.3-2014 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 11017.3-2024: Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 66 kV(Um=72.5 kV) and 110 kV(Um=126 kV) - Part 3: Accessories---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 29.060.20 CCSK13 National Standard of the People's Republic of China Replaces GB/T 11017.3-2014 Rated voltage 66kV (Um=72.5kV) and 110kV (Um=126kV) Cross-linked polyethylene insulated power cable Cable accessories and their accessories Part 3.Cable accessories 110kV(Um=126kV)-Part 3.Accessories Released on 2024-09-29 2025-04-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Conditions of use 2 5 Product naming 3 6 Technical Requirements 6 7 Accessory mark 8 8 Tests and requirements 8 9 Acceptance Rules 10 10 Packaging, transportation and storage 10 Appendix A (Informative) Properties of Semi-conductive Rubber Tape 12 Appendix B (Informative) Properties of Epoxy Resin Curing (Colloid) 13 Appendix C (informative) Properties of liquid insulating fillers 14 Reference 15 Table 1 Outdoor terminal external insulation pollution level code 4 Table 2 Product model and name 5 Table 3 Test items and requirements of the appendix 10 Table A.1 Properties of semi-conductive rubber tape 12 Table B.1 Properties of epoxy resin cured (colloid) 13 Table C.1 Properties of silicone oil 14 Table C.2 Properties of polyisobutylene 14ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is GB/T 11017 "Rated voltage 66kV (Um=72.5kV) and 110kV (Um=126kV) cross-linked polyethylene insulation Power cables and their accessories" Part 3.GB/T 11017 has published the following parts. --- Part 1.Test methods and requirements; --- Part 2.Cables; --- Part 3.Cable accessories. This document replaces GB/T 11017.3-2014 "Rated voltage 110kV (Um=126kV) cross-linked polyethylene insulated power cables and their Annex Part 3.Cable accessories, compared with GB/T 11017.3-2014, in addition to structural adjustments and editorial changes, the main technical changes are The following. --- Increased the range of rated voltage (see Chapter 1 and 4.1); --- Added the routine test items of the annex (see Table 3); --- Changed the accessory type test items and requirements (see Table 3, Table 3 of the.2014 edition); --- Changed the provisions on packaging, transportation and storage of accessory products (see Chapter 10, Chapter 10 of the.2014 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Electrical Equipment Industry Association. This document is under the jurisdiction of the National Technical Committee for Standardization of Wire and Cable (SAC/TC213). This document was drafted by. Shanghai Cable Research Institute Co., Ltd., China Electric Power Research Institute Co., Ltd., Shanghai Guolan Testing Co., Ltd. Co., Ltd., Changlan Technology Group Co., Ltd., TBEA Showa (Shandong) Cable Accessories Co., Ltd., Shanghai Yongjin Electric Technology Co., Ltd. Co., Ltd., Shanghai Sanyuan Cable Accessories Co., Ltd., Jiangsu Yuchengyeji Electrical Equipment Co., Ltd., Changyuan Electric Power Technology Co., Ltd., Guangdong Jixian Cable Accessories Co., Ltd., Jiangsu Zhongtian Technology Cable Accessories Co., Ltd., Qingdao Hanlan Co., Ltd., Shenyang Furukawa Cable Co., Ltd. Co., Ltd., Hangzhou Huaxin Electric Power Cable Co., Ltd. The main drafters of this document are. Xia Junfeng, Deng Xianbo, Gu Xiao, Li Shaobin, Chen Mengmeng, Ke Degang, Xu Cao, Tang Zhihui, Xu Yongjun, Long Liying, Tian Zhengbing, Zhang Jie, Zhao Haijun, Guo Haijun. The previous versions of this document and the documents it replaces are as follows. ---First published in 1989 as GB/T 11017-1989; --- The first revision in.2002 was adjusted to GB/T 11017.3-2002, and the second revision in.2014; ---This is the third revision.IntroductionRated voltage 66kV and 110kV power cables are widely used in power transmission networks, in urban power grids, large enterprises, and new energy power generation. GB/T 11017 is a product standard for power cables and accessories with rated voltages of 66kV and 110kV. The naming rules, test methods, technical requirements, etc. of power cables and accessory systems are planned to be composed of three parts. --- Part 1.Test methods and requirements. The purpose is to specify the general Requirements for test methods and procedures. --- Part 2.Cables. The purpose is to unify the classification, naming, structure and technical specifications of power cables with rated voltages of 66 kV and 110 kV. Technical requirements. --- Part 3.Cable accessories. The purpose is to unify the classification, naming, Structural and technical requirements. Rated voltage 66kV (Um=72.5kV) and 110kV (Um=126kV) Cross-linked polyethylene insulated power cable Cable accessories and their accessories Part 3.Cable accessories1 ScopeThis document specifies the conditions of use, product naming, technical specifications, and other requirements of accessories for cross-linked polyethylene insulated power cables with rated voltages of 66 kV and 110 kV. Technical requirements, testing and acceptance rules, packaging, transportation and storage. This document is applicable to outdoor terminals for cross-linked polyethylene insulated power cables with rated voltages of 66kV and 110kV under general installation conditions. Terminals, GIS terminals, oil-immersed (transformer) terminals, straight-through connectors and insulating connectors.2 Normative referencesThe contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 311.1 Insulation coordination Part 1.Definitions, principles and rules GB/T 1527 Copper and copper alloy drawn tubes GB/T 4423 Copper and copper alloy drawn bars GB/T 8287.1 Indoor and outdoor post insulators for systems with nominal voltages above 1000V Part 1.Porcelain or glass insulators Test GB/T 11017.1-2024 Rated voltage 66kV (Um=72.5kV) and 110kV (Um=126kV) cross-linked polyethylene insulation Power cables and their accessories Part 1.Test methods and requirements GB/T 11017.2-2024 Rated voltage 66kV (Um=72.5kV) and 110kV (Um=126kV) cross-linked polyethylene insulation Power cables and their accessories Part 2.Cables GB/T 16927.1 High voltage test technology Part 1.General definitions and test requirements GB/T 21429 Definitions, test methods, acceptance criteria and design recommendations for hollow composite insulators for outdoor and indoor electrical equipment GB/T 22381-2017 Gas-insulated metal-enclosed switchgear with fluid-filled and extruded insulation for rated voltage 72.5 kV and above Connecting fluid-filled and dry-type cable terminals for power cables GB/T 23752 Pressure-bearing and non-pressure-bearing hollow porcelain and glass insulators for electrical equipment with rated voltage above 1000V GB/T 26218.1 Selection and sizing of high-voltage insulators for use under polluted conditions Part 1.Definitions, information and general in principle IEC 62271-209 High-voltage switchgear and controlgear Part 209.Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV tions)3 Terms and definitionsThe following terms and definitions apply to this document. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11017.3-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 11017.3-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 11017.3-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11017.3-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 11017.3-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11017.3-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
