GB/T 10944.1-2013 English PDF

US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10944.1-2013: Tool shanks with 7/24 taper for automatic tool changers -- Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
Status: Valid

GB/T 10944.1: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 10944.1-2013	194	Add to Cart	3 days	Tool shanks with 7/24 taper for automatic tool changers -- Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF	Valid
GB/T 10944.1-2006	239	Add to Cart	3 days	Tool shanks with 7: 24 taper for automatic tool changers -- Part 1: Shanks Nos. 40, 45 and 50 -- Part 1: Dimensions and conicity tolerances	Obsolete
GB/T 10944-1989	239	Add to Cart	2 days	Tool shanks with 7: 24 taper for automatic tool changers--Shanks Nos. 40, 45 and 50	Obsolete

Similar standards

GB/T 33524.2   GB/T 972   GB/T 5104   GB/T 10944.4   GB/T 10944.5   GB/T 10944.3   

Basic data

Standard ID: GB/T 10944.1-2013 (GB/T10944.1-2013)
Description (Translated English): Tool shanks with 7/24 taper for automatic tool changers -- Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J41
Classification of International Standard: 25.100.01
Word Count Estimation: 10,122
Older Standard (superseded by this standard): GB/T 10944.1-2006
Quoted Standard: ISO 2768-1; ISO 2768-2; ISO 8015
Adopted Standard: ISO 7388-1-2007, IDT |
Regulation (derived from): National Standards Bulletin 2013 No. 27
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the A, AD, AF, U, UD and UF-type automatic tool changer 7: 24 taper tool shank size, tool handles fit in this cone from the magazine with a delivery tool from the spindle to spindle or delivery tool the magazine's auto caught using

GB/T 10944.1-2013: Tool shanks with 7/24 taper for automatic tool changers -- Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tool shanks with 7/24 taper for automatic tool changers Part 1.. Dimensiors and designation of shanks of forms A, AD, AF, U, UD and UF ICS 25.100.01 J41 National Standards of People's Republic of China Replacing GB/T 10944.1-2006 ATC tool shank taper 7.24 Part 1. A, AD, AF, U, UD and UF type Dimensions and marking shank Part 1. DimensionsanddesignationofshanksofformsA, AD, AF, U, UDandUF (ISO 7388-1.2007, IDT) Issued on. 2013-12-31 2014-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 10944 "ATC 7.24 cone tool shank" is divided into five sections. --- Part 1. A, AD, AF, U, UD and UF type shank dimensions and marking; --- Part 2. J, JD and JF type shank dimensions and marking; Part --- Section 3. AC, AD, AF, UC, UD, UF, JD and JF type Rivet; --- Part 4. handles the technical conditions; --- Part 5. Rivet technical conditions. This section GB/T Part of 110,944. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 10944.1-2006 "automatic tool changer with tool shank taper 7.24 Part 40, 45 and 50 handle 1. Size and taper angle tolerance ", compared with the GB/T 10944.1-2006, the main technical changes are as follows. --- Modify the name in English; --- Modify the scope; --- Modify the normative references; --- Remove the original tool shank shown (Figure 1), adding a new type A and U-shank icon; --- Remove the original tool shank size table (Table 1), adding a new type A and U-shank size table; --- Remove the cone angle tolerances, annotations directly on the chart; --- Tool shank model increased by 30 and 60, the corresponding type and size has also increased; --- Increase the size of some models of the tool shank of 40,45,50; --- Provide increased coolant hole of AD, AF, UD and UF tool handles; --- Handle increased data chip with holes; --- Increased material and heat treatment information; --- Increasing the mark; --- Increased by reference. This section uses the translation method identical with ISO 7388-1.2007 "with 7/24 taper for automatic tool changers tool shank - Part 1. A, AD, AF, U, UD and UF type shank types and dimensions "(in English). Consistency correspondence between this part of international documents and normative references of our files are as follows. --- GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without individual tolerance (eqv ISO 2768-1. 1989); --- GB/T 1184-1996 shape and position tolerances without individual tolerance value (eqv ISO 2768-2. 1989); --- GB/T 4249-2009 Geometrical product specifications (GPS) principles of tolerance (ISO 8015. 1985, MOD). This part of ISO 7388-1.2007 compared to modify the following editorial. --- Tags, ISO 7388 with the GB/T 10944.1 instead. This part is proposed by China Machinery Industry Federation. This part of the tool by the National Standardization Technical Committee (SAC/TC91) centralized. This section is responsible for drafting unit. Chengdu Tool Research Institute Co., Ltd., Chengdu into a tool Group Co., Ltd., Harbin Measuring & Cutting Tool Sets Group limited liability company. The main drafters of this section. Yu Zeng ring, check States soldiers, Chen Li, Tian Lixin, Wang Zhigang, in Haihong. This part of the standard replaces the previous editions are. --- GB/T 10944-1989, GB/T 10944.1-2006. ATC tool shank taper 7.24 Part 1. A, AD, AF, U, UD and UF type Dimensions and marking shank

1 Scope

GB/T 10944 in the provisions of this Part A, AD, AF, U, UD and UF automatic tool changer 7.24 taper tool shank size, which Species conical tool holder with a suitable delivery vehicle from the magazine to the spindle or spindle from the tool to the magazine conveyor automatic gripper system from Movable tool change on the machine to use. The most important of these dimensions of the tool shank and spindle nose size according to ISO 9270 to match the design. This section applies to automatic tool change tool shank taper 7.24.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. ISO 2768-1 General tolerances - Part 1. No NOTE tolerances for linear and angular tolerances (Generaltolerances-Part 1. Tolerancesforlinearandangulardimensionswithoutindividualtoleranceindications) ISO 2768-2 General tolerances - Part 2. No individual tolerance components of geometric tolerances (Generaltolerances-Part 2. Geometricaltolerancesforfeatures withoutindividualtoleranceindicationsfirstedition; CEN EN22768-2.1993) ISO 8015 Technical drawings - tolerancing basic principles (Technicaldrawings-Fundamentaltolerancing principle)

3 type and size

3.1 General provisions All dimensions and tolerances are in millimeters, tolerance according to ISO 8015, ISO 2768-1 did not note tolerance press the "m" level and press ISO 2768-2 of "k" level. 3.2 A and U shank Figure 1 and Table 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 10944.1-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 10944.1-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 10944.1-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 10944.1-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 10944.1-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10944.1-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.