GB/T 10892-2021 English PDFUS$499.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10892-2021: Stationary air compressors - Safety rules and code of practice Status: Valid GB/T 10892: Historical versions
Basic dataStandard ID: GB/T 10892-2021 (GB/T10892-2021)Description (Translated English): Stationary air compressors - Safety rules and code of practice Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J72 Word Count Estimation: 26,246 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 10892-2021: Stationary air compressors - Safety rules and code of practice---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Stationary air compressors -- Safety rules and code of practice ICS 23:140 CCSJ72 National Standards of People's Republic of China Replacing GB/T 10892-2005 Fixed air compressor safety rules and operating procedures (ISO 5388:1981, MOD) Published on 2021-12-31 2022-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Unit System 1 5 Types of compressors 1 6 Potential Accident 2 7 General requirements for compressor design and construction 4 8 Guard 4 9 Piping and pressure vessels 4 10 Vibration and pressure pulsation5 11 Electrical equipment 5 12 Overheating 5 13 Materials 5 14 Compressor installation and air distribution system 6 15 Installation of the compressor 6 16 Inspection platform 7 17 Pressure gauge 7 18 Piping system 7 19 Design of pressure relief devices 8 20 Applications of Pressure Relief Devices 8 21 Installation of pressure relief device 9 22 Noise 9 23 Operation of the compressor 10 24 Maintenance 10 Appendix A (informative) This document is compared with ISO 5388:1981 structure number12 Appendix B (informative) Technical differences between this document and ISO 5388:1981 and their reasons 15 Appendix C (Informative) Noise 17 Appendix D (Informative) Design Principles for Oil Lubricated Reciprocating Compressor Pressure Systems 18 Appendix E (normative) Lubrication of air compressors 19 Appendix F (Informative) Mechanism of Coking Spontaneous Combustion and Causes of Oil Explosion 20 Appendix G (Informative) Prevention of Crankcase Explosion 21 Reference 22 Table 1 Maximum allowable thickness of soot layer11 Table A:1 Comparison of structure numbers between this document and ISO 5388:198112 Table B:1 Technical differences between this document and ISO 5388:1981 and their reasons 15 forewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted: This document replaces GB/T 10892-2005 "Stationary Air Compressor Safety Rules and Operating Regulations", and GB/T 10892- Compared with:2005, except for structural adjustment and editorial changes, the main technical changes are as follows: --- Adjusted terms and definitions (see Chapter 3, Chapter 4 of the:2005 edition); --- Supplementary situations that are likely to cause personal injury (see 6:4, 6:4 of the:2005 edition); --- Changed the noise health requirements (see 6:5, 6:5 of the:2005 edition); --- Simplified the requirements for the content of the nameplate (see 7:1, 7:1 of the:2005 edition); --- Changed the prerequisite requirements for the exhaust temperature limit of the fuel injection rotary machine (see 12:1, 12:1 of the:2005 edition); --- Changed the temperature requirements for exhaust over-temperature protection (see 12:2, 12:2 of the:2005 edition); --- Supplement the requirements for inhaled air quality (see 15:2, 15:2 of the:2005 edition); --- Refine the installation position of the pressure instrument (see 17:1, 17:1 of the:2005 edition); --- Changed the pressure setting requirements of the pressure relief device (see 20:1, 20:5, 20:6, 20:8, 21:1, 20:1, 20:5, 20:1, 20:5,:2005 edition) 20:6, 20:8, 21:1); --- Changed the requirements for resetting the pressure relief device (see 24:16, 24:16 of the:2005 edition); --- Increased lubricating oil classification and typical application requirements (see E:4:2): This document is revised and adopted ISO 5388:1981 "Safety Rules and Operating Instructions for Stationary Air Compressors": Compared with ISO 5388:1981, this document has more structural adjustments: Appendix A lists this document and ISO 5388:1981: Structure number comparison: Compared with ISO 5388:1981, this document has many technical differences: In the outer margins of the clauses involved, a vertical single Lines (|) are marked: See Appendix B for a list of these technical differences and their reasons: The following editorial changes have also been made to this document: --- The pressure unit replaces "bar" with "MPa"; ---The Kelvin "K" is changed to the Celsius temperature "℃": Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Compressor Standardization Technical Committee (SAC/TC145): This document is drafted by: Hefei General Machinery Research Institute Co:, Ltd:, Zhejiang Hongwuhuan Machinery Co:, Ltd:, Zhejiang Kaishan Compressor Co:, Ltd:, Enric (Bengbu) Compressor Co:, Ltd:, Xinlei Compressor Co:, Ltd: The main drafters of this document: Ren Fang, Chen Dexiang, Xu Qiulin, Wang Lixin, Zang Jie, Yuan Jun, Xing Zhisheng, Ye Peng, Wang Jun, Jie Zhengyi, Wang Chenxi, Xu Hongfu, Luo Jia: The previous versions of this document and its superseded documents are as follows: --- First published in 1989 as GB 10892-1989, first revised in:2005; --- In:2017, it was converted to the recommended standard GB/T 10892-2005; ---This is the second revision: Fixed air compressor safety rules and operating procedures1 ScopeThis document specifies that the design, installation, operation and maintenance of general fixed or skid-mounted air compressors (hereinafter referred to as compressors) should be Observe the safety rules and operating procedures: This document is applicable to compressors with shaft power not less than 2kW and rated discharge pressure of 0:05MPa~5MPa: This document does not apply to the following types of compressors: a) Special compressors for breathing, diving, surgery; b) compressors for air brake systems; c) Ejector:2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document: GB 3100 International System of Units and Its Application (GB 3100-1993, eqvISO 1000:1992) GB/T 7631:9 Classification of Lubricants, Industrial Oils and Related Products (Class L) Part 9: Group D (Compressors) (GB/T 7631:9- 2014, ISO 6743-3:2003, MOD) GB/T 13306 Signs3 Terms and DefinitionsThe following terms and definitions apply to this document: 3:1 Relief valve or safety valve set pressure reliefvalveorsafetyvalvesetpressure The pressure at the inlet of the relief valve or safety valve when it begins to open: 3:2 surge limit surgelimit A limit flow of the turbo compressor, under which the compressor will not be able to work stably:4 unit systemThis document adopts the SI system unit specified in GB 3100:5 types of compressors5:1 Classification Compressors can be divided into oil-free lubricated compressors, oil-lubricated reciprocating compressors and oil-injected rotary compressors according to the lubrication method: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10892-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 10892-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10892-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10892-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 10892-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10892-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
