GB/T 10858-2023 English PDFUS$419.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10858-2023: Wire electrodes, wires and rods for welding of aluminium and aluminium alloys Status: Valid GB/T 10858: Historical versions
Basic dataStandard ID: GB/T 10858-2023 (GB/T10858-2023)Description (Translated English): Wire electrodes, wires and rods for welding of aluminium and aluminium alloys Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J33 Classification of International Standard: 25.160.20 Word Count Estimation: 22,218 Date of Issue: 2023-09-07 Date of Implementation: 2024-04-01 Older Standard (superseded by this standard): GB/T 10858-2008 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 10858-2023: Wire electrodes, wires and rods for welding of aluminium and aluminium alloys---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 25.160.20 CCSJ33 National Standards of People's Republic of China Replace GB/T 10858-2008 Aluminum and aluminum alloy welding wire (ISO 18273.2015,Weldingconsumables-Wireelectrodes,wiresandrods Published on 2023-09-07 2024-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPreface III 1 Scope 1 2 Normative reference documents 1 3 Terms and Definitions 1 4 Model 1 5 Technical requirements 2 6 Test methods 8 7 Amendment Rules 9 8 Inspection Rules 9 9 Technical conditions of supply10 Appendix A (informative) Comparison table 11 between this document and ISO 18273.2015 structure numbers Appendix B (informative) Technical differences between this document and ISO 18273.2015 and their reasons 12 Appendix C (informative) Welding wire model comparison 13 Appendix D (informative) Determination of hydrogen content in welding wire by inert gas fusion infrared absorption method 15 Reference 17ForewordThis document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document replaces GB/T 10858-2008 "Aluminum and Aluminum Alloy Welding Wire". Compared with GB/T 10858-2008, except for structural adjustment and compilation In addition to editorial changes, the main technical changes are as follows. a) The technical requirements for dimensions have been changed (see 5.1, 4.2 of the.2008 edition); b) The technical requirements and test methods for surface quality have been changed (see 5.1 and 6.1.2, 4.3 and 5.2.2 of the.2008 edition); c) Added 3 models. SAl4020, SAl4943 and SAl5R59 (see 5.2); d) Changed the chemistry of SAl5087, SAl5183A, SAl5356A, SAl5556, SAl5556A, SAl5556B, SAl5654 Ingredient code (see 5.2, 4.1 of the.2008 edition); e) Added technical requirements and recommended test methods for providing actual measured values of hydrogen content (see 5.2 and 6.2); f) Added technical requirements and test methods for the mechanical properties of deposited metal, welding process performance and weld X-ray inspection (see 5.4~ 5.6,6.3~6.5); g) Added the test method for length of straight filling wire (see 6.1.1); h) Changes to the sampling requirements for chemical composition analysis of welding wire (see 6.2, 5.1.1 of the.2008 edition); i) Added contract modification rules (see Chapter 7); j) Batch grouping rules and test levels have been changed (see 8.1 and 8.2, 6.1 and 6.3 of the.2008 version); k) Changed the sampling rules (see 8.3, 6.2 of the.2008 version); l) Delete the requirements for packaging, marking and quality certificates (see Chapter 7 of the.2008 edition); m) The technical conditions for supply have been changed (see Chapter 9, Chapter 7 of the.2008 edition). This document has been modified to adopt ISO 18273.2015 "Welding Materials Classification of Solid Welding Wires and Filling Wires for Aluminum and Aluminum Alloys". Compared with ISO 18273.2015, this document has many structural adjustments. Comparison list of structure number changes between the two files See Appendix A. Compared with ISO 18273.2015, there are many technical differences between this document and the clauses involved in the outer margin of the page. Single lines (|) are marked. A list of these technical differences and their causes is provided in Appendix B. The following editorial changes have been made to this document. a) In order to coordinate with the existing standards, the name of the standard is modified to "Aluminum and Aluminum Alloy Welding Wire"; b) Added Appendix C (Informative) "Welding Wire Model Comparison"; c) Added Appendix D (informative) "Determination of hydrogen content in welding wire by inert gas fusion infrared absorption method"; d) Added references. Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed and coordinated by the National Welding Standardization Technical Committee (SAC/TC55). This document was drafted by. Harbin Welding Research Institute Co., Ltd. of China Machinery Industry Group, Hangzhou Kunli Welding Materials Co., Ltd., Harbin Welding Research Institute Co., Ltd. Welding Institute Huatong (Changzhou) Welding Co., Ltd., Beckenhoff (China) Co., Ltd., China Ordnance Industry No. 52 Research Institute, Zhejiang Yuguang Aluminum Co., Ltd., Jiangsu Xinzhong Aluminum Welding Technology Co., Ltd., Tianjin Jinqiao Welding Materials Group Co., Ltd., Tianjin Daqiao Welding Materials Group Co., Ltd., Kunshan Jingqun Welding Materials Technology Co., Ltd., Shandong Juli Welding Materials Co., Ltd., CRRC Qingdao Sifang Rolling Stock Co., Ltd. Company, Shanghai SMIC Welding Materials Co., Ltd., Shandong Shishang Welding Materials Co., Ltd., Zhengzhou Machinery Research Institute Co., Ltd., CRRC Changchun Rail Passenger Cars Co., Ltd., Beijing University of Technology, Shanghai Installation Engineering Group Co., Ltd., and National Welding Materials Quality Inspection and Testing Center. The main drafters of this document. Yang Zijia, Chen Jiqiang, Li Zhenhua, Meng Xianqi, Zhou Guxin, Xu Yujun, Lin Zhongqiang, Zhou Chen, Xiao Huiying, Yang Tianwen, Tong Tianwang, Meng Bo, Han Xiaohui, Wu Bin, Shang Jinsheng, Long Weimin, He Guangzhong, Li Hong, Mao Hua, Fan Youhua, Ding Guohua, Feng Qiang. The previous releases of this document are as follows. This document was first published in 1989, revised for the first time in.2008, and this is the second revision. Aluminum and aluminum alloy welding wire1 ScopeThis document specifies the models, technical requirements, test methods, rounding rules, inspection rules and supply of aluminum and aluminum alloy solid welding wires and filler wires. Goods technical conditions and other contents. This document applies to aluminum and aluminum alloy solid welding wires and filler wires (hereinafter referred to as "welding wires") for fusion welding.2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. GB/T 2652 Destructive testing of welds of metallic materials Longitudinal tensile test of weld metal of molten welding joints GB/T 3323.1 Radiographic testing for non-destructive testing of welds Part 1.Film technology for X-ray and gamma rays GB/T 8170-2008 Numerical rounding rules and representation and determination of limit values GB/T 18591 Measurement Guide for Welding Preheating Temperature, Interpass Temperature and Preheating Maintenance Temperature GB/T 25775 Technical conditions for supply of welding materials Product type, size, tolerance and marking (GB/T 25775-2010, ISO 544.2003,MOD) GB/T 25778 Welding Materials Procurement Guide (GB/T 25778-2010, ISO 14344.2010, MOD)3 Terms and definitionsThere are no terms or definitions to be defined in this document.4 models4.1 Model classification Welding wire models are divided according to the chemical composition of the welding wire. For a comparison of the welding wire models of this document and other relevant standards, see Appendix C. 4.2 Model compilation method The welding wire model should consist of two parts. a) Part 1.Use the letter “S” to indicate welding wire; b) Part 2.Use “Al” plus 4 digits, a 4-digit or 5-digit combination of numbers and letters to represent the chemical composition classification of aluminum welding wires Code, see Table 1. In addition to the above mandatory codes, optional codes can be appended in parentheses after the second part. The chemical composition code is represented by "Al" plus the chemical symbol and nominal content of the main added elements, see Table 1. Examples of welding wire models in this document are as follows. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10858-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 10858-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10858-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10858-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 10858-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10858-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
