GB/T 10623-2008 English PDFUS$649.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10623-2008: Metallic material -- Mechanical testing -- Vocabulary Status: Valid GB/T 10623: Historical versions
Basic dataStandard ID: GB/T 10623-2008 (GB/T10623-2008)Description (Translated English): Metallic material -- Mechanical testing -- Vocabulary Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H22 Classification of International Standard: 77.040.10 Word Count Estimation: 28,253 Date of Issue: 2008-05-13 Date of Implementation: 2008-11-01 Older Standard (superseded by this standard): GB/T 10623-1989 Adopted Standard: ISO 23718-2007, MOD Regulation (derived from): National Standard Approval Announcement 2008 No.8 (Total No.121) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the terms mechanical properties of metallic materials used in the test. And the formation of a common standard and general use when the title is. GB/T 10623-2008: Metallic material -- Mechanical testing -- Vocabulary---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Metallic material. Mechanical testing. Vocabulary ICS 77.040.10 H22 National Standards of People's Republic of China Replacing GB/T 10623-1989 Mechanical testing of metallic materials term (ISO 23718.2007, MOD) Posted 2008-05-13 2008-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 General terms 1 2 3 3 general term uniaxial testing 4 8 generic term ductility test 5 generic term hardness test 10 6 13 generic terms toughness test 7 generic term fatigue test 18 Appendix A (informative) This standard reg number and ISO 23718.2007 reg control number 23 Annex B (informative) This standard and ISO 23718.2007 technical differences and their Causes 24 Index 25ForewordThis revised standard adopts ISO 23718.2007 "test the mechanical properties of metallic materials the term" (in English). The main technical content with The same, but more detailed and specific, write structure does not correspond exactly. Also refer to the United States ASTME06-03 "Mechanical tests on standard operation The term "and ASTME1823-05" fatigue and fracture tests of the standard terminology, "the two standards. This standard is based on ISO 23718.2007 redrafted in order to facilitate comparison, in Appendix A lists the provisions of the present national and international standards Control list of standard terms. As China's actual needs, the standard at the time of adoption of international standards has been modified. The technical differences between a single vertical line labeled Knowledge involved in their terms of margin. It gives a list of the technical differences and their reasons in Appendix B for control. For ease of use, this standard made the following editorial changes. --- "This International Standard" be replaced by "this standard"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Remove the foreword and introduction of international standards. This standard replaces GB/T 10623-1989 "test the mechanical properties of metals term." This standard and GB/T 10623-1989, compared with significant amendments and supplements in the following aspects. ---range; --- General terms the former standard 49 reduced to 24; --- Uniaxial testing standard generic term consolidation of the original terms of tension and compression test, creep, stress relaxation and creep rupture strength and torsional Term test, the former standard of 67 was reduced to 53; --- Ductility test generic term corresponding to the term of the original technology test standard from the original 32 was reduced to 19; --- Hardness test standard generic term for the original increase of 18 to 27; --- Toughness test standard generic term corresponding to the original terms of the impact test and fracture test in terms from the original 60 was reduced to 55; --- Fatigue test standard generic term for the original 83 was reduced to 40; --- Deletion of the original standard, "Chapter 4, shear and bending test" and "Chapter 11, abrasion test"; --- Increase the informative Appendix A and Appendix B; --- English index merged, organized in the order in accordance with the terms of the alphabet, and lists the terms corresponding to the page number, without Is the corresponding chapter number. The Standard Appendix A and Appendix B are informative appendices. The standard proposed by China Iron and Steel Association. This standard is under the jurisdiction of the National Steel Standardization Technical Committee. This standard was drafted. Iron and Steel Research Institute, Metallurgical Industry Information Standards Institute, Shougang Group, Baosteel Co., Ltd., Wuhan Chinese Iron and Steel (Group) Corporation, Jinan Test Group Corporation, Shanghai Research Institute of Materials, Changchun Testing Machine Institute, Beijing Institute of Aeronautical Materials, have Ferrous metals Research Institute, China Institute of Metrology. The main drafters of this standard. TESTING AND TESTING AND Zhang Hailong, Zhang Yuchun, Li Dong, Wang Ping, Zhou Xing, Li Heping, IRON Geng Xiuying, Wang Bin, ROCKETS, Zhu also steel, Wang Fusheng, Nitrogeh Co. This standard was first released in February 1989. Mechanical testing of metallic materials term1 ScopeThis standard defines the term mechanical properties of metallic materials used in the test, and the formation of common standards and is generally used when the title is.2 general terms2.1 Δ Rao Crack extension crackextension Increasing the amount of crack length. NOTE. expressed in millimeters (mm). 2.2 < Fracture toughness> for compact tension specimen, the crack length from the load line to indicate the length of the crack tip; the intermediate crack specimens is Refers to the length from the center of the middle of the crack to the crack tip; to bend specimens, is measured from the front end surface of the sample to the length of the crack tip. 2.3 Crack size cracksize < Fatigue> linear measurements from the reference plane to the main plane of the crack tip size. NOTE. expressed in millimeters (mm). 2.4 It refers to plastic deformation before breaking ability of the material. 2.5 When stress is completely released material can be maintained without permanent strain of maximum stress. 2.6 Mechanical testing, the role to the size, direction, and other basic natural force point attributes described in the external test object and in its interior Vector generated stress. 2.7 Elastic and inelastic reactions associated with stress or material contained in the display of force - strain properties. 2.8 Test mechanical properties. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10623-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 10623-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10623-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10623-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 10623-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10623-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
