GB/T 10430-2008 English PDFUS$149.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10430-2008: Inspection method for bonding ability of sintered friction elements Status: Valid GB/T 10430: Historical versions
Basic dataStandard ID: GB/T 10430-2008 (GB/T10430-2008)Description (Translated English): Inspection method for bonding ability of sintered friction elements Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H72 Classification of International Standard: 77.040.10 Word Count Estimation: 5,525 Date of Issue: 2008-08-11 Date of Implementation: 2009-02-01 Older Standard (superseded by this standard): GB/T 10430-1989 Regulation (derived from): National Standard Approval Announcement 2008 No.14 (Total No.127) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the test device performance testing of sintered metal bonded friction plate friction material and steel core plate, test procedures and test reports, specimens. This standard applies to the manufacture of sintered powder metallurgy friction plate, bending test methods and test friction material layer between the steel core plate bonding properties, other similar materials can also be implemented by reference. GB/T 10430-2008: Inspection method for bonding ability of sintered friction elements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Inspection method for bonding ability of sintered friction elements ICS 77.040.10 H72 National Standards of People's Republic of China Replacing GB/T 10430-1989 Sintered metal friction plate bonding performance test Posted 2008-08-11 2009-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 10430-1989 "sintered metal friction plate bonding strength determination." This standard GB/T 10430-1989 amended as follows. --- Standard Chinese original title was changed to "sintered metal friction plate bonding performance test method" and the English title revised accordingly. --- Modify the original standard test apparatus. --- Modify the original standard sample requirements. --- Modify the original standard test results evaluation method. --- Provisions of the specification referenced file version. --- Using the latest standard narrative language. This standard is proposed and managed by China Machinery Industry Federation. This standard was drafted. Beijing North Transtech Mount friction materials limited liability company. The main drafters of this standard. Ong, Jian-Feng Chen, Xiao Kai, Zheng Dan, Ma Huanong. This standard replaces the standards previously issued as follows. --- GB/T 10430-1989. Sintered metal friction plate bonding performance test1 ScopeThis standard specifies the test device performance test bonding sintered metal friction plate friction material and steel core plate, sample, test procedures and test Inspection reports. This standard applies to the manufacture of sintered powder metallurgy friction plate, bending test method for testing the inter-friction material layer and the bonding properties of the steel core plate, Other similar materials may also be implemented by reference.2 test deviceV-groove test apparatus is shown in Figure 1. 1 --- press on the platform; 2 --- indenter (tip R = 10mm, width L = 50mm); 3 --- steel core plate; 4 --- friction material layer; 5 --- V-groove (thickness 60mm; 45 # steel, quenched and tempered hardness of 28HRC ~ 33HRC); 6 --- press the lower platform. 1 Vp-slot test system schematic diagram3 Sample3.1 specimen directly with the test product can be cut from the tested product, the size of the sample width not more than 50mm, the sample length is not less than 70mm, and to ensure that does not affect the accuracy of test results. 3.2 per furnace batch friction plate number of samples by the user and manufacturer of consultations among themselves. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10430-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 10430-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10430-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10430-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 10430-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10430-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
