GB/T 10319-2008 English PDF

US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10319-2008: General specifications for marine pneumatic measurement and control instruments
Status: Valid

GB/T 10319: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 10319-2008	329	Add to Cart	3 days	General specifications for marine pneumatic measurement and control instruments	Valid
GB/T 10319-1988	519	Add to Cart	4 days	General technical specifications for marine pneumatic measurement and control instruments	Obsolete

Similar standards

GB/T 4830   GB/T 2625   GB/T 41771.6   GB/T 45510   GB/T 20965   

Basic data

Standard ID: GB/T 10319-2008 (GB/T10319-2008)
Description (Translated English): General specifications for marine pneumatic measurement and control instruments
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N10;U62
Classification of International Standard: 25.040.40; 47.020.60
Word Count Estimation: 14,165
Date of Issue: 2008-07-28
Date of Implementation: 2009-02-01
Older Standard (superseded by this standard): GB/T 10319-1988
Regulation (derived from): Announcement of Newly Approved National Standards No. 12 of 2008 (No. 125 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the ship with a pneumatic measuring and control instruments (hereinafter referred to as marine pneumatic instrumentation) requirements, test methods, inspection rules, marking and packaging requirements. This standard applies to all kinds of ships and marine engineering using pneumatic measuring and control instruments. This standard applies to vessels using pneumatic instruments can be classified according to their functions: a) instrumentation (test temperature, pressure, level, flow, volume and other variables used mechanical instruments), b) control instruments (bit controller, continuous controller, etc.), c) actuator (control valves, actuators, etc.), d) display instruments (recorder, indicator, etc.), e) other applicable instruments. For all kinds of different products specific requirements, this standard has not been specified, shall conform to the respective product standards or technical conditions.

GB/T 10319-2008: General specifications for marine pneumatic measurement and control instruments

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specifications for marine pneumatic measurement and control instruments ICS 25.040.40. 47.020.60 N10. U62 National Standards of People's Republic of China Replacing GB/T 10319-1988 Marine pneumatic measuring and control instruments General technical conditions Posted 2008-07-28 2009-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 requires 2 4.1 General Requirements 2 4.2 Design and construction 2 4.3 Material 2 4.4 Performance 2 4.5 gas supply, input and output signals, air consumption 2 4.6 Working environment 2 4.7 Anti-collision transport 4 4.8 4 protective shell Test Method 5 5 5.1 Test conditions 5 5.2 General examination 5 5.3 Performance 5 5.4 gas source, gas consumption 5 5.5 Working environment 5 5.6 Anti-collision transportation 9 5.7 Housing Protection 9 10 6 Inspection Rules 6.1 factory inspection 10 6.2 Type test 10 7 logo 10 8 package 10

Foreword

This standard revises and replaces the GB/T 10319-1988 "marine pneumatic measuring and control instruments General technical requirements." This standard and GB/T 10319-1988 main differences are as follows. --- Updated normative references. a) with GB/T 17214.2-2005 "industrial process measurement and control equipment operating conditions - Part 2. Power" instead GB 4830 Industrial automation instrument air pressure range and quality; b) with the GB/T 15464-1995 "instrument packaging technology" instead ZBY003; c) with the GB/T 17212-1998 "industrial process measurement and control - Terms and definitions" instead ZBY247; d) with JB/T 9253-1999 "General Provisions of industrial automation instruments scale" instead ZBY123; e) by JB T 9329-1999 "instrument transport, transportation, storage and basic environmental conditions and test methods"/replaced ZBY002. --- Under the original standard table 7 Notes 1 and 2 included in the standard as a table Note Table 7, note 3 reclassified under the provisions of this standard 4.6.9; --- Table 8, the wavelength of visible light original standard 0.40μm ~ 0.76μm corrected to 0.40μm ~ 0.78μm; --- Table 9, referring to China Classification Society GD01-2006, relative humidity, atmospheric conditions in general to 30% to 90%; --- Terms of salt spray test method (5.5.4) to do a re-arranging, and with reference to GB/T 2423.17 and GB/T 2423.18 supplement A predetermined initial detection and pretreatment; --- Modify the presentation of Chapter 6 Inspection rules; --- Full text made editorial changes to the test methods expressed in a chapter of this Article made appropriate changes. The standard proposed by China Machinery Industry Federation. The standard measurement and control Standardization Technical Committee at its first Technical Committee (SAC/TC124/SC1) administered by the National industrial processes. This standard is drafted by. Shanghai Institute of Industrial Automation Instrumentation. Participated in the drafting of this standard. Shanghai Automation Instrumentation System Inspection and Testing Institute. The main drafters of this standard. Li Minghua, Tsai Wen-chi. Participate drafters of this standard. Lu Ting, Xiao practice. This standard replaces the standards previously issued as follows. --- GB/T 10319-1988. Marine pneumatic measuring and control instruments General technical conditions

1 Scope

This standard specifies the marine pneumatic measuring and control instruments (hereinafter referred to as marine pneumatic) requirements, test methods, inspection rules, Logo and packaging requirements. This standard applies to all kinds of ships and marine engineering using pneumatic measuring and control instruments. This standard applies to ships with pneumatic instrument can be divided according to their functions. a) instrumentation (detected temperature, pressure, level, flow, mechanical variables such as the amount of used instruments); b) control instrument (position controller, continuous controller, etc.); c) actuators (control valves, actuators, etc.); d) display instruments (recorder, indicator, etc.); e) other suitable instrument. For different types of product-specific requirements, the standards were not provided, it shall comply with the respective product standards or technical conditions. In tests specified in this standard, if requested exemption of certain items should be agreed between the manufacturer and the user, and with the consent ship inspection department.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2422 electric and electronic products environmental testing terminology (GB/T 2422-1995, eqv IEC 60068-5-2.1990) GB/T 2423.10 Environmental testing for electric and electronic products Part II. Test methods Test Fc. Vibration (sinusoidal) (GB/T 2423.10-2008, IEC 60068-2-6.1995, IDT) GB/T 2423.16 Environmental testing for electric and electronic products Part II. Tests - Test J and guidance. Mould growth (GB/T 2423.16-1999, idt IEC 60068-2-10.1998) GB/T 2423.24 Environmental testing for electric and electronic products Part II. Test methods - Test Sa. on analogue terrestrial solar radiation (GB/T 2423.24-1995, idt IEC 60068-2-5. 1975) GB 4208 housing protection (IP Code) (GB 4208-2008, IEC 60529.2001, IDT) GB/T 8355 General technical conditions for ship electric measuring and control instruments GB/T 15464 instrumentation packaging technology GB/T 17212 industrial engineering measurement and control - Terms and definitions (GB/T 17212-1998, idt IEC 60902. 1987) GB/T 17214.2 industrial process measurement and control equipment operating conditions - Part 2. Power (GB/T 17214.2-2005, IEC 60654-2. 1979, IDT) The general provisions of JB/T 9253 Industrial Automation Instrumentation scale JB/T 9329 Instrumentation transport, transportation, storage and basic environmental conditions and test methods

3 Terms and Definitions

GB/T 2422, GB/T 8355 and GB/T 17212 and established the following terms and definitions apply to this standard. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 10319-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 10319-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 10319-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 10319-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 10319-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10319-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.