GB 8965.1-2020 PDF EnglishUS$205.00 · In stock · Download in 9 seconds
GB 8965.1-2020: Protective clothing - Flame retardant protective clothing Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB 8965.1: Historical versions
Similar standardsGB 8965.1-2020: Protective clothing - Flame retardant protective clothing---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB8965.1-2020GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 13.340.10 C 73 Replacing GB 8965.1-2009 Protective clothing - Flame retardant protective clothing Issued on. JULY 23, 2020 Implemented on. AUGUST 01, 2021 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 1 Scope... 5 2 Normative references... 5 3 Terms and definitions... 7 4 Gradation... 9 5 Requirements... 9 6 Test method... 14 7 Inspection rules... 17 8 Identification, packaging and storage... 18 Appendix A (Normative) Thermal stability test method... 20 References... 22ForewordThis Standard was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard replaces GB 8965.1-2009, Protective clothing - Flame-retardant protection - Part 1.Flame-retardant protective clothing. Compared with GB 8965.1-2009, the major technical changes of this Standard are as follows. -- Add and update the normative references; -- Add and modify some terms and definitions; -- Delete Class-C flame retardant protective clothing and its requirements; -- Add technical requirements for knitted outer shell and clothing; -- Delete the requirements for outer shell bending length; add the requirements for limit of decomposable carcinogenic aromatic amine dyes and odor; -- Add the requirements for physical and chemical properties of lining; -- According to GB/T 5455-2014, stipulate the outer shell flame retardancy test method; -- Modify the technical requirements and indicators of the stitch length; add the requirements for joint strength of general parts and the test methods and requirements for joint flame retardancy; -- Modify the indicator requirements for the strength of the crotch seam at the back of the pants and the shoulder seam; add the seam strength requirements for the armhole seam and other parts; -- Add the overall thermal protective capability of the manikin flashover test clothing; -- Delete the thermal protective performance test method in Appendix A of GB 8965.1-2009; revise the thermal stability test method in Appendix B of GB 8965.1-2009 to Appendix A in this Standard; -- Modify the number of samples for thermal stability and thermal protective performance testing; -- Modify the inspection rules; -- Supplement and modify the contents of marking and labelling. This Standard is proposed and managed by the Ministry of Emergency Management of the People's Republic of China. The previous versions of the standards which are replaced by this Standard are. -- GB 8965-1988, GB 8965-1998; -- GB 8965.1-2009. Protective clothing - Flame retardant protective clothing1 ScopeThis Standard specifies the classification, requirements, test methods, inspection rules, identification, packaging and storage of flame-retardant protective clothing. This Standard applies to flame retardant protective clothing that is used in places where there are open flames, sparks, or where there are flammable substances and flashover risks.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document. GB/T 250, Textiles - Tests for colour fastness - Grey scale for assessing change in colour GB/T 2912.1, Textiles - Determination of formaldehyde - Part 1.Free and hydrolyzed formaldehyde (water extraction method) GB/T 3291.3, Textiles - Terms of textile material properties and test - Part 3. General GB/T 3916-2013, Textiles - Yarns from packages - Determination of single- end breaking force and elongation at break using constant rate of extension (CRE) tester GB/T 3917.3, Textiles - Tear properties of fabrics - Part 3.Determination of tear force of trapezoid-shaped test specimens GB/T 3920, Textiles - Tests for colour fastness - Colour fastness to rubbing GB/T 3921, Textiles - Tests for colour fastness - Colour fastness to washing with soap or soap and soda GB/T 3922, Textiles - Tests for colour fastness - Colour fastness to perspiration3 Terms and definitionsTerms and definitions determined by GB/T 12903, GB/T 3291.3 and the following ones are applicable to this document. 3.1 Flame retardant protective clothing Protective clothing that can prevent itself from being ignited, flaming combustion, and flameless combustion within a certain period of time after contact with flames and hot objects. 3.2 Afterflame time Under the specified test conditions, the time of continuous flame combustion of the material after the ignition source is removed. 3.3 Afterglow time Under the specified test conditions, when the flame combustion is terminated, or for flameless combustion, after the ignition source is removed, the time of continuous flameless combustion of the material. 3.4 Damaged length Under the specified test conditions, the maximum length of the damaged part of the material in the specified direction. 3.5 Thermal protective performance; TPP In the process of testing the thermal protective material, the cumulative energy that is determined by the intersection of the measured heat transfer reaction curve of the material over the cumulative time and the Stoll curve. 3.6 Inherent flame-retardant fabric Without any flame retardant after treatment, the flame-retardant fabric that has the corresponding level of flame-retardant performance only through the flame- retardant fiber material or the combination of flame-retardant fiber materials that constitute the fabric.4 GradationAccording to the protective ability of clothing, flame retardant protective clothing is divided into two grades, A and B.5 Requirements5.1 Materials 5.1.1 Outer shell 5.1.2 Lining If the flame-retardant protective clothing uses lining, the flame-retardant performance of the lining shall meet the requirements of Table 3 before washing and after washing through the washing procedure that is specified in 6.2. 5.1.3 Sewing thread 5.1.4 Accessories, auxiliary materials and interlining 5.2 Style The style shall be simple, practical, and beautiful, and shall be selected from the following styles. Separate top and bottom clothing, trousers (cap) one-piece, etc. 5.3 Structure 5.3.1 When the tester wears clothing of the same size to perform the following actions, the clothing shall always cover the torso and limbs; the waist, abdomen, forearms, wrists, legs and other parts that are covered by the clothing shall not be exposed. 5.3.2 The exposed pocket shall be covered with a flap; the length of the jacket shall cover the upper end of the trousers by more than 20 cm; the cuffs, leg openings and collar shall be closed; the length of the flap shall be greater than the length of the pocket by 2 cm. The pockets on both sides of the trousers must not have slant pockets, so as to avoid sloping up and overturning. 5.3.3 It is not easy to cause hooking, hanging, twisting and grinding during operation. 5.4 Size and specifications The size of the protective clothing shall meet the requirements of GB/T 13640; the range beyond GB/T 13640 shall be set by the grade difference. The allowable tolerances of the finished product size measurement position and main parts comply with the regulations of FZ/T 81007. 5.5 Sewing 5.8 Flame retardant performance of finished products under flashover conditions Test the samples before and after washing according to the method that is specified in 6.22.6 Test method6.1 The thermal protective performance of the outer shell is tested according to the provisions of GB/T 38302-2019; the number of samples is 3; the afterflame time, afterglow time, damaged length and melting and dripping test methods of the outer shell and lining are tested in accordance with the methods that are specified in Condition A of GB/T 5455-2014. 6.2 Unless otherwise specified, use the A2 automatic washing machine that is specified in GB/T 8629-2017 to wash the flame-retardant protective clothing or outer shell in this Standard; use the normal stirring method to wash for 12.5 h; 6.3 Test the breaking force of the outer shell according to GB/T 3923.1. 6.4 Test the tear strength of the outer shell according to GB/T 3917.3. 6.5 Test the bursting strength of the outer shell according to the method that is specified in GB/T 7742.1; the test area is 7.3 cm2. 6.6 Test the moisture permeability of the outer shell according to the method that is specified in GB/T 12704.1. 6.10 The thermal stability test method of outer shell and lining shall be carried out in accordance with Appendix A. Test Grade-A at (260±5) °C, and Grade-B at (180±2) °C. 6.11 Perform the test of color fastness to washing with soap or soap and soda according to provisions of GB/T 3921. 6.12 Perform the test of color fastness to rubbing according to provisions of GB/T 3920. 6.20 For the seam strength test of the finished product, clothing of woven fabric is tested according to the method that is specified in GB/T 21294; test the seam strength of the clothing of knitted fabrics according to the method that is specified in FZ/T 70007.The test position is the crotch seam at the back of the pants and the underarm seam. Take a sample for each part. 6.21 The dimensional change rate of finished product after washing shall be carried out in accordance with the provisions of GB/T 8628 and GB/T 8630.Use the 4N program in GB/T 8629-2017 to wash; for the woven fabric, use the hanging and drying method to dry; for the knitted fabric, use the spreading and drying method to dry.7 Inspection rules7.1 Classification of quality defects See Table 5 for the classification of quality defects. 7.2 Each quality defect is calculated cumulatively according to Table 5;8 Identification, packaging and storage8.1 Identification 8.1.1 Each set of protective clothing shall have a permanent mark, including a certificate of quality, instructions for use and graphic symbols. 8.1.3 The product shall be accompanied by instructions for use, which shall meet the requirements of GB/T 5296.4 and include the following contents. 8.1.4 The flame-retardant protective clothing shall have graphic symbols. According to GB/T 20097, the form of Figure 1 shall be used; the number of this Standard and the level of the flame-retardant protective clothing shall be marked below the graphic symbols. 8.2 Packaging The product packaging container shall be regular and firm, without damage; the inner and outer packaging shall be equipped with a moisture-proof layer; the combined size shall be matched; the product quantity shall be accurate; the stack shall be neat. The box shall be accompanied by the manufacturer's packaging inspection sheet; 8.3 Storage The product shall not be put together with corrosive materials. The storage place shall be dry and ventilated. Avoid direct sunlight. The package shall be more than 20 cm away from the wall and the ground to prevent rat bites, insects, and mildew. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB 8965.1-2020 be delivered?Answer: The full copy PDF of English version of GB 8965.1-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB 8965.1-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB 8965.1-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 8965.1-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB 8965.1-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 8965.1-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB 8965.1-2020?A step-by-step guide to download PDF of GB 8965.1-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB 8965.1-2020". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
