GB 5085.7-2019 PDF EnglishUS$110.00 · In stock · Download in 9 seconds
GB 5085.7-2019: Identification standards for hazardous waste - General rules Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB 5085.7: Historical versions
Similar standardsGB 5085.7-2019: Identification standards for hazardous waste - General rules---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB5085.7-2019GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA Replacing GB 5085.7-2007 Identification standards for hazardous waste - General rules ISSUED ON: NOVEMBER 07, 2019 IMPLEMENTED ON: JANUARY 01, 2020 Issued by: Ministry of Ecological Environment; State Administration for Market Regulation. Table of ContentsForeword ... 3 1 Scope ... 5 2 Normative references ... 5 3 Terms and definitions ... 6 4 Identification procedures ... 6 5 Judgment rules for hazardous waste after mixing ... 7 6 Judgment rules for hazardous waste after recycling and disposal ... 7 7 Implementation and supervision ... 8ForewordThis standard is formulated to implement the Environmental Protection Law of the People's Republic of China and the Law of the People's Republic of China on the Prevention and Control of Environmental Pollution by Solid Wastes; to prevent and control environmental pollution caused by hazardous wastes; to strengthen the management of hazardous wastes; to protect the ecological environment and human health. This standard is an integral part of the identification standards for hazardous waste. The identification standards for hazardous waste stipulate the technical indicators of the hazardous characteristics of solid wastes. Solid wastes with hazardous characteristics that meet the technical indicators specified in the standards are hazardous wastes and must be managed as hazardous wastes according to law. The identification standards for hazardous waste consist of the following 7 standards: 1. Identification standards for hazardous wastes - General rules 2. Identification standards for hazardous wastes - Identification for corrosivity 3. Identification standards for hazardous wastes - Screening test for acute toxicity 4. Identification standards for hazardous wastes - Identification for extraction toxicity 5. Identification standards for hazardous wastes - Identification for ignitability 6. Identification standards for hazardous wastes - Identification for reactivity 7. Identification standards for hazardous wastes - Identification for toxic substance content This standard specifies the identification procedures and identification rules for hazardous waste. This standard was first published in 2007 and this is the first revision. The main contents of this revision are as follows: - Further CLARIFY the identification procedure; - Further REFINE the rules for the determination of hazardous waste after mixing, utilization and disposal. Since the implementation of this standard, the "Identification standards for Identification standards for hazardous waste - General rules1 ScopeThis standard specifies the identification procedures and identification rules for hazardous waste. This standard is applicable to the identification of hazardous characteristics of solid waste generated in production, life and other activities. This standard applies to the identification of liquid waste. This standard does not apply to the identification of radioactive waste.2 Normative referencesThe content of this standard refers to the clauses in the following documents. For undated references, the valid version is applicable to this standard. GB 5085.1 Identification standards for hazardous wastes - General specifications GB 5085.2 Identification standards for hazardous wastes - Identification for toxic substance content GB 5085.3 Identification standards for hazardous wastes - Identification for extraction toxicity GB 5085.4 Identification standards for hazardous wastes - Identification for ignitability GB 5085.5 Identification standards for hazardous wastes - Identification for reactivity GB 5085.6 Identification standards for hazardous wastes - Identification for toxic substance content GB 34330 Identification standards for solid wastes - General rules HJ 298 Technical specifications on identification for hazardous waste National Hazardous Waste List (Order No.39 of the Ministry of following procedures: 4.1 According to the law and GB 34330, determine whether the items and substances to be identified are solid wastes; those that are not solid wastes are not hazardous wastes. 4.2 If it is judged to be solid waste, it is first identified according to the "National Hazardous Waste List". All solid wastes listed in the "National Hazardous Waste List" are hazardous wastes and do not require identification of hazardous characteristics. 4.3 The solid wastes that are not included in the "National Hazardous Waste List", but does not exclude the corrosive, toxic, flammable and reactive nature are identified according to GB 5085.1, GB 5085.2, GB 5085.3, GB 5085.4, GB 5085.5, GB 5085.6, HJ 298. All solid wastes with one or more hazardous characteristics of corrosiveness, toxicity, flammability and reactivity are classified as hazardous wastes. 4.4 Solid wastes that are not included in the "National Hazardous Waste List" and cannot be identified according to the identification standards for hazardous wastes, but may cause harmful effects on human health or the ecological environment, are identified by experts organized by the competent department of the ecological environment of the State Council.5 Judgment rules for hazardous waste after mixing5.1 If the hazardous wastes with one or two of the toxic and infectious hazardous characteristics are mixed with other substances, causing the hazardous characteristics to diffuse into other substances, the mixed solid wastes are classified as hazardous wastes. 5.2 If the hazardous wastes with only one or more hazardous characteristics of corrosiveness, flammability and reactivity are mixed with other substances, the mixed solid wastes are no longer classified as hazardous wastes after being identified as having no longer hazardous characteristics. 5.3 If the hazardous waste is mixed with radioactive waste, the mixed waste shall be managed as radioactive waste.6 Judgment rules for hazardous waste after recyclingand disposal 6.1 The solid waste as produced during the recycling process and after disposal of the hazardous wastes which have only one or more hazardous ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB 5085.7-2019 be delivered?Answer: The full copy PDF of English version of GB 5085.7-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB 5085.7-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB 5085.7-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 5085.7-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB 5085.7-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 5085.7-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB 5085.7-2019?A step-by-step guide to download PDF of GB 5085.7-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB 5085.7-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
