GB 5085.1-2007 PDF EnglishUS$70.00 · In stock · Download in 9 seconds
GB 5085.1-2007: Identification standards for hazardous wastes -- Identification for corrosivity Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB 5085.1: Historical versions
Similar standardsGB 5085.1-2007: Identification standards for hazardous wastes -- Identification for corrosivity---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB5085.1-2007NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 13.060 Z 16 Replacing GB 5085.1-1996 Identification Standards for Hazardous Wastes Identification for Corrosivity ISSUED ON: APRIL 25, 2007 IMPLEMENTED ON: OCTOBER 1, 2007 Issued by: State Administration for Environmental Protection; General Administration of Quality Supervision, Inspection and Quarantine. Table of ContentsAnnouncement of State Administration for Environmental Protection ... 3 Foreword ... 5 1 Scope ... 7 2 Normative References ... 7 3 Identification Standard ... 7 4 Test Methods ... 7 5 Implementation of Standard ... 8 Announcement of State Administration for Environmental Protection Year-2007 No. 37 In order to implement The Law of the People’s Republic of China on Environmental Protection and The Law of the People’s Republic of China on the Prevention and Control of Environmental Pollution by Solid Waste, protect the environment and protect human health, seven standards, including Identification Standards for Hazardous Wastes - General Specification, are hereby approved to be national technical standards on solid waste pollution and environmental control, which are jointly issued by General Administration of Quality Supervision, Inspection and Quarantine, and our administration. The title and serial No. of the standards are as follows: 1. Identification Standards for Hazardous Wastes - General Specification (GB 5085.7-2007) 2. Identification Standards for Hazardous Wastes - Identification for Corrosivity (GB 5085.1-2007) 3. Identification Standards for Hazardous Wastes - Screening Test for Acute Toxicity (GB 5085.2-2007) 4. Identification Standards for Hazardous Wastes - Identification for Extraction Toxicity (GB 5085.3-2007) 5. Identification Standards for Hazardous Wastes - Identification for Ignitability (GB 5085.4-2007) 6. Identification Standards for Hazardous Wastes - Identification for Reactivity (GB 5085.5-2007) 7. Identification Standards for Hazardous Wastes - Identification for Toxic Substance Content (GB 5085.6-2007) In accordance with relevant provisions by law, the above standards have the effectiveness of enforcement. The above standards, which shall be put into effect since October 1, 2007, are published by China Environmental Science Press. The content of the standards may be inquired through the website of the State Administration for Environmental Protection (website: www.sepa.gov.cn/tech/hjbz/bzwb).ForewordIn order to implement The Law of the People’s Republic of China on Environmental Protection and The Law of the People’s Republic of China on the Prevention and Control of Environmental Pollution by Solid Waste, prevent and control environmental pollution caused by hazardous wastes, reinforce the management of hazardous wastes, protect the environment and protect human health, this Standard is formulated. This Standard is a constituent part of the national identification standards for hazardous wastes. The national identification standards for hazardous wastes stipulate the technical indicators of hazardous characteristics of solid wastes. Solid wastes whose hazardous characteristics comply with the technical indicators stipulated in this Standard belong to hazardous wastes and shall be managed as hazardous wastes pursuant to law. The national identification standards for hazardous wastes are constituted of the following seven standards: 1. Identification Standards for Hazardous Wastes - General Specification 2. Identification Standards for Hazardous Wastes - Identification for Corrosivity 3. Identification Standards for Hazardous Wastes - Screening Test for Acute Toxicity 4. Identification Standards for Hazardous Wastes - Identification for Extraction Toxicity 5. Identification Standards for Hazardous Wastes - Identification for Ignitability 6. Identification Standards for Hazardous Wastes - Identification for Reactivity 7. Identification Standards for Hazardous Wastes - Identification for Toxic Substance Content This Standard is an amendment of Identification Standard for Hazardous Wastes - Identification for Corrosivity (GB 5085.1-1996). The main content adds identification standard and test method for steel corrosion. In accordance with relevant provisions by law, this standard has the effectiveness of enforcement. This Standard was proposed by the Science and Technology Standard Office of State Administration for Environmental Protection. The drafting organizations of this Standard: Solid Waste Pollution Control Technology Research Institute of Chinese Research Academy of Environmental Sciences; Environmental Standard Research Institute of Chinese Research Academy of Environmental Sciences. Identification Standards for Hazardous Wastes Identification for Corrosivity1 ScopeThis Standard stipulates the identification standards for corrosive hazardous wastes. This Standard is applicable to the identification for corrosivity of any solid wastes that are generated in production, life and other activities.2 Normative ReferencesThrough the reference in this part of GB 5085, the clauses in the following documents become clauses of this Standard. In terms of references without a specified date, the latest version is applicable to this Standard. GB/T 699 Quality Carbon Structural Steels; GB/T 15555.12-1995 Solid Waste - Glass Electrode Test - Method of Corrosivity; HJ/T 298 Technical Specifications on Identification for Hazardous Waste; JB/T 7901 Metals Materials - Uniform Corrosion - Methods of Laboratory Immersion Testing3 Identification StandardSolid wastes that satisfy one of the following conditions belong to hazardous wastes. 3.1 Leaching agent, which is prepared in accordance with the stipulations in GB/T 15555.12-1995, pH 12.5, or pH ≤ 2.0. 3.2 Under the condition of 55 °C, corrosion rate of No. 20 steel stipulated in GB/T 699 6.35 mm/a.4 Test Methods4.1 Sampling point and sampling method shall comply with the stipulations in HJ/T 298. 4.2 The determination of pH value, which is listed in Clause 3.1, shall comply with the stipulations in GB/T 15555.12-1995. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB 5085.1-2007 be delivered?Answer: The full copy PDF of English version of GB 5085.1-2007 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB 5085.1-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB 5085.1-2007_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 5085.1-2007 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB 5085.1-2007?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 5085.1-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB 5085.1-2007?A step-by-step guide to download PDF of GB 5085.1-2007_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB 5085.1-2007". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
