GB/T 5082-2019 English PDF

US$264.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5082-2019: Cranes - Hand signals
Status: Valid

GB/T 5082: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 5082-2019	264	Add to Cart	3 days	Cranes - Hand signals	Valid
GB 5082-1985	RFQ	ASK	6 days	[GB/T 5082-1985] The commanding signal for lifting and moving	Obsolete

Similar standards

GB/T 5905.1   GB/T 6068   GB/T 5973   GB/T 5974   GB/T 6974.8   

Basic data

Standard ID: GB/T 5082-2019 (GB/T5082-2019)
Description (Translated English): Cranes - Hand signals
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J80
Classification of International Standard: 53.020.20
Word Count Estimation: 14,132
Date of Issue: 2019-12-10
Date of Implementation: 2020-07-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 5082-2019: Cranes - Hand signals

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cranes--Hand signals ICS 53.020.20 J80 National Standards of People's Republic of China Replaces GB/T 5082-1985 Crane gesture signal 2019-12-10 release 2020-07-01 implementation State Administration of Market Supervision Published by the National Standardization Management Committee

Contents

Foreword III 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Requirements for gesture signals 1 4.1 General 1 4.2 General gesture signals 2 4.3 Vertical motion 2 4.4 Horizontal movement 3 4.5 Operation of related parts 5 Appendix A (informative) Control of lifting spreaders 7 Reference 8

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 5082-1985 "lifting and hoisting command signal". Compared with GB/T 5082-1985, except for editorial changes The main technical changes are as follows. --- Modified the scope (see Chapter 1, "Introduction" to the 1985 edition); --- Increased normative references (see Chapter 2); --- Modified terms and definitions (see Chapter 3, Chapter 1 of the 1985 edition); --- Modified the requirements for gesture signals (see Chapter 4, Chapter 2 of the 1985 edition); --- Removed the audio signal used by the driver (see Chapter 3 of the 1985 edition); --- Removed the coordinated application of the signal (see Chapter 4 of the 1985 edition); --- Removed the basic requirements for commanders and drivers (see Chapter 5 of the 1985 edition); --- Removed the relevant regulations on management (see Chapter 6 of the 1985 edition). This standard uses the translation method equivalent to ISO 16715..2014 "Gesture signals used by cranes for cranes". The Chinese documents that have a consistent correspondence with the international documents referenced normatively in this standard are as follows. --- GB/T 6974.1-2008 Crane Terminology Part 1. Common Terminology (ISO 4306-1..2007, IDT) The following editorial changes have been made to this standard. --- Modified the standard name; --- Separate the text and text and number the text. This standard is proposed by China Machinery Industry Federation. This standard is under the jurisdiction of the National Hoisting Machinery Standardization Technical Committee (SAC/TC227). This standard was drafted. Liaoning Province Safety Science Research Institute, Beijing Hoisting and Transportation Machinery Design and Research Institute Co., Ltd., Beijing Hoisting and Transportation Machinery Design and Research Institute Co., Ltd. Henan Branch, Henan Mine Crane Co., Ltd., Henan Weihua Heavy Machinery Co., Ltd., Shanghai Haishi Machinery Construction Group Co., Ltd., Foshan Nanhai District Special Equipment Association, Changyuan County Market Supervision Administration, Jiangxi Crane Machinery General Factory Co., Ltd., Henan Giant Crane Group Co., Ltd. The main drafters of this standard. Gao Cheng, Zhang Pei, Song Xuxian, Qu Dayong, Ren Haitao, Wu Jun, Chen Xiaoming, Liang Jianxin, Wang Hongbo, Wang Guangming, Liu Xiaosheng, Zhai Jingyun, Ma Wei, You Jianyang. The previous versions of the standards replaced by this standard are. --- GB/T 5082-1985. Crane gesture signal

1 Scope

This standard specifies the gesture signals used for crane lifting operations.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. ISO 4306-1 Crane Terminology Part 1. General (Cranes-Vocabulary-Part 1. General)

3 terms and definitions

The terms and definitions defined in ISO 4306-1 and the following apply to this document. 3.1 End instructionceoperation; dogging After uninstalling, stop the instruction permanently or temporarily. 3.2 Slewling; swinging The crane base is stationary and the load moves horizontally around the axis. 3.3 Run travel The entire machine (car and wheel) of the crane moves.

4 Requirements for gesture signals

4.1 General Gesture signals should meet the following requirements. a) Gesture signals should be used reasonably and fully understood by crane operators; b) Gesture signals should be clear and concise to prevent misunderstanding; c) Non-special one-arm signals can be represented by any arm (special signals can be represented by a left or right hand); d) Commanders should follow the following rules. 1) in a safe position; 2) should be clearly seen by the operator; 3) Facilitate clear observation of loads or equipment; e) The gesture signal received by the operator can only be given by one person, except the emergency stop signal; f) When necessary, signals can be used in combination. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5082-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5082-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5082-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5082-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5082-2019?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5082-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.