Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB 5009.282-2020 PDF English

US$110.00 · In stock · Download in 9 seconds
GB 5009.282-2020: National food safety standard - Determination of 1-methylimidazole, 2-methylimidazole and 4-methylimidazole in foods
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB 5009.282-2020110 Add to Cart Auto, 9 seconds. National food safety standard - Determination of 1-methylimidazole, 2-methylimidazole and 4-methylimidazole in foods Valid

Similar standards

GB 5009.281   GB 5009.280   GB 5009.28   GB 5009.290   

GB 5009.282-2020: National food safety standard - Determination of 1-methylimidazole, 2-methylimidazole and 4-methylimidazole in foods


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB5009.282-2020
NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA National food safety standard - Determination of 1- methylimidazole, 2-methylimidazole and 4-methylimidazole in food Issued on: SEPTEMBER 11, 2020 Implemented on: MARCH 11, 2021 Issued by. National Health Commission of PRC; State Administration for Market Regulation.

Table of Contents

1 Scope... 3 2 Principles... 3 3 Reagents and materials... 3 4 Instruments and equipment... 6 5 Analysis steps... 6 6 Presentation of analysis results... 10 7 Precision... 11 8 Others... 11 Appendix A Reference mass spectrometry conditions... 12 Appendix B Chromatogram of standards... 13 National food safety standard - Determination of 1- methylimidazole, 2-methylimidazole and 4-methylimidazole in food

1 Scope

This standard specifies the method for the determination of 1-methylimidazole, 2- methylimidazole, and 4-methylimidazole in food by liquid chromatography-tandem mass spectrometry. This standard applies to the determination of the content of 1-methylimidazole, 2- methylimidazole, and 4-methylimidazole in condensed milk, frozen drinks, jams, soy products, cocoa and chocolate products, candy, wheat flour products, biscuits, fillings and surface slurries, meat products, flavored syrups, condiments (soy sauce, vinegar, sauce and sauce products, cooking wine, compound seasoning), beverages, wine, jelly, and puffed food.

2 Principles

After adding the isotope internal standard to the sample, carry out the extraction with water or acid water, perform the purification and concentration by a solid-phase extraction column, determine by a liquid chromatography-tandem mass spectrometer, and use the isotope internal standard method for quantification.

3 Reagents and materials

Unless otherwise specified, the reagents used in this method are all analytical reagents, and the water is the grade I water specified in GB/T 6682. 3.1 Reagents 3.1.1 Acetonitrile (CH3CN). chromatographically pure. 3.1.2 Methanol (CH3OH). chromatographically pure. 3.1.3 Formic acid (HCOOH). chromatographically pure. 3.1.4 Ammonia water (NH4OH). The concentration shall be 25%~28%. 3.1.5 N-hexane (CH3(CH2)4CH3). chromatographically pure. 3.1.6 Ammonium acetate (CH3COONH4). chromatographically pure. 3.1.7 Sodium chloride (NaCl). 3.2 Reagent preparation 3.2.1 2% formic acid aqueous solution. Measure out 20 mL of formic acid, add it to 980 mL of water, and mix well. 3.2.2 Ammonia methanol solution. Measure out 50 mL of ammonia water, add it to 950 mL of methanol, and mix well. 3.2.3 Ammonium acetate solution (5 mmol/L). Weigh 0.39 g of ammonium acetate, dissolve it in 1000 mL of water, and mix well. 3.2.4 Acetonitrile-ammonium acetate solution (9+1). Mix acetonitrile and ammonium acetate solution (5 mmol/L) uniformly in a volume ratio of 9.1. 3.3 Standards 3.3.1 1-methylimidazole standard (C4H6N2, CAS number. 616-47-7). purity ≥98%, or a standard substance certified by the country and granted a standard substance certificate. 3.3.2 2-methylimidazole standard (C4H6N2, CAS number. 693-98-1). purity ≥98%, or a standard substance certified by the country and granted a standard substance certificate. 3.3.3 4-methylimidazole standard (C4H6N2, CAS number. 822-36-6). purity ≥98%, or a standard substance certified by the country and granted a standard substance certificate. 3.3.4 Isotope internal standard 1-methylimidazole-D6 (C4H6N2, CAS number. 285978- 27-0). purity ≥98%. 3.3.5 Isotopic internal standard 2-methylimidazole-D6 (C4H6N2, CAS number. 1173022-19-9). purity ≥98%. 3.3.6 Isotope internal standard 4-methylimidazole-D6 (C4H6N2, CAS number. 1219804- 79-1). purity ≥98%. 3.4 Standard solution preparation 3.4.1 Standard stock solution (1 mg/mL). Accurately weigh 25 mg of 1- methylimidazole standard (the weight shall be accurate to 0.01 mg), add 1 mL of water to dissolve it, and transfer it with acetonitrile to a 25 mL brown volumetric flask; make up to the mark and shake well. Accurately weigh 25 mg of 2-methylimidazole standard and 4-methylimidazole standard respectively (the weight shall be accurate to 0.01 mg), dissolve them with acetonitrile, and transfer to 25mL brown volumetric flasks; respectively dilute to the mark and shake well. Keep them sealed at -20 ℃ and away from light, then they are valid for 6 months. 3.4.2 Mixed standard working solution (2.0 μg/mL). Pipette 100 μL of each of the above standard stock solutions into the same 50 mL brown volumetric flask, add acetonitrile to dilute to the mark, and shake well; then, the mixed standard solution of 2.0 μg/mL is obtained. Keep this solution sealed at 4 ℃ and away from light, then it is valid for 3 months. 3.4.3 Isotope internal standard stock solution (1 mg/mL). Accurately weigh 10 mg of 1-methylimidazole-D6, 2-methylimidazole-D6, and 4-methylimidazole-D6 respectively (the weight shall be accurate to 1 mg), dissolve them with acetonitrile, and transfer to 10 mL brown volumetric flasks; dilute to the mark and shake well. Keep them sealed at -20 ℃ and away from light, then they are valid for 6 months. 3.4.4 Isotope internal standard mixed working solution (1.0 μg/mL). Pipette 100 μL of each of the above isotope internal standard stock solutions into the same 100 mL brown volumetric flask, dilute to the mark with acetonitrile, and shake well; then, the isotopic internal standard mixed working solution of 1.0 μg/mL is obtained. Keep this solution sealed at 4 ℃ and away from light, then it is valid for 3 months. 3.4.5 Standard series solutions. Pipette 25 μL, 75 μL, 150 μL, 300 μL, 600 μL, and 1000 μL of mixed standard working solutions into 5 mL brown volumetric flasks, respectively, add 250 μL of isotope internal standard mixed working solution, and use acetonitrile- ammonium acetate solution (9+1) to dilute the mixed solution to the scale; then, the mixed standard series solution of 1-methylimidazole, 2-methylimidazole and 4-methylimidazole are prepared, and the mass concentration is 10 ng/mL, 30 ng/mL, 60 ng/mL, 120 ng/mL, 240 ng/mL, 400 ng/mL respectively. In the actual sample determination, the added amount and dilution multiple of the isotope internal standard mixed working solution can be adjusted according to the sample concentration. 3.5 Materials 3.5.1 Mixed cation exchange solid phase extraction column. N-vinylpyrrolidone- divinylbenzene copolymer matrix-sulfonic acid group, 150 mg, 6 mL, or equivalent. Before use, activate it with 5 mL methanol first, and then rinse it with 5 mL water to balance. 3.5.2 Homogeneous particle. It shall be suitable for 50 mL centrifuge tubes. 3.5.3 Organic filter membrane. The pore size shall be 0.22 μm. volume to 20 mL, and shake well; put it in a centrifuge tube, and centrifuge at 10,000 r/min for 5 min; the supernatant is to be purified later. 5.1.2.2 Semi-fluid samples (such as jam, oyster sauce, flavored syrup, frozen drinks) and gum-based candy, tapioca balls Weigh 2 g of uniformly mixed sample (the weight shall be accurate to 0.001 g), and put it in a 50 mL centrifuge tube; add 100 μL of 1.0 μg/mL isotope internal standard mixed working solution, and mix well; add 20 mL of water accurately, vortex for 1 min, and heat it in a water bath at 70 °C for 10 min. After it cools to room temperature, perform the ultrasonic extraction for 20 min, and centrifuge at the speed of 10,000 r/min and the temperature of 4 ℃ for 5 min; the supernatant is to be purified later. 5.1.2.3 Jelly Weigh 2 g of uniformly mixed sample (the weight shall be accurate to 0.001g), and put it in a 50 mL centrifuge tube; add 100 μL of 1.0 μg/mL isotope internal standard mixed working solution, and mix well; add 2 g of sodium chloride, accurately add 20 mL of water, vortex for 1 min, and heat it in a 70 ℃ water bath for 10 min. After it cools to room temperature, perform the ultrasonic extraction for 20 min, and centrifuge at the speed of 10,000 r/min and the temperature of 4 ℃ for 5 min; the supernatant is to be purified later. 5.1.2.4 Condensed milk, cocoa and chocolate products Weigh 2 g of uniformly mixed sample (the weight shall be accurate to 0.001 g), and put it in a 50 mL centrifuge tube; add 100 μL of 1.0 μg/mL isotope internal standard mixed working solution, and mix well; accurately add 20 mL of 2% formic acid aqueous solution, and heat it in a 60 °C water bath for 5 min; add 2 homogeneous particles, vortex for 5 min, and centrifuge at 10,000 r/min for 5 min; the supernatant is to be purified later. 5.1.2.5 Other samples such as bean products, sauces and sauce products Weigh 2 g of uniformly mixed sample (the weight shall be accurate to 0.001 g), and put it in a 50 mL centrifuge tube; add 100 μL of 1.0 μg/mL isotope internal standard mixed working solution, and mix well; add 20 mL of water accurately, homogenize for 1 min, and centrifuge at the speed of 10,000 r/min and the temperature of 4 °C for 5 min; the supernatant is to be purified later. 5.1.3 Sample purification 5.1.3.1 Soy sauce, vinegar, beverages, wine, condensed milk, cocoa and chocolate products Pipette 10 mL of the supernatant, pass it through a solid-phase extraction column, rinse with 5 mL of 2% formic acid aqueous solution and 5 mL of methanol in turn, and elute it with 10 mL of ammonia methanol solution; collect all the eluent, and blow with nitrogen below 45 °C to near dryness. Accurately add 1 mL of acetonitrile-ammonium acetate solution (9+1), vortex for 30 s, filter it through a 0.22 μm organic filter membrane, and use the filtrate for the determination with a liquid chromatograph mass spectrometer. 5.1.3.2 Oyster sauce Pipette 10 mL of the supernatant, add 200 μL of formic acid to mix and acidify, and filter it if necessary; pass it through a solid phase extraction column, rinse with 5 mL of 2% formic acid aqueous solution and 5 mL of acetonitrile in turn, and drain; rinse twice with 1.5 mL of n-hexane and drain again; then, elute it with 10 mL of ammonia methanol solution, collect all the eluent, and blow with nitrogen below 45 ℃ to near dryness; add 1 mL of acetonitrile-ammonium acetate solution (9+1) accurately, vortex for 30 s, filter it through a 0.22 μm organic system membrane, and use the filtrate for the determination with a liquid chromatograph mass spectrometer. 5.1.3.3 Other substrates except those mentioned in 5.1.3.1 and 5.1.3.2 Pipette 10 mL of the supernatant, add 200 μL of formic acid to mix and acidify, and filter it if necessary; pass it through a solid phase extraction column, rinse with 5 mL of 2% formic acid aqueous solution and 5 mL of methanol in turn, and elute with 10 mL of ammonia methanol solution; collect all the eluent, and blow with nitrogen below 45 °C to near dryness; add 1 mL of acetonitrile- ammonium acetate solution (9+1) accurately, vortex for 30 s, filter it through a 0.22 μm organic filter membrane, and use the filtrate for the determination with a liquid chromatograph mass spectrometer. 5.2 Instrument reference conditions 5.2.1 Liquid chromatography reference conditions The liquid chromatography reference conditions are listed below. a) Liquid chromatography column. HILIC column (2.1 mm×100 mm, 3.5 μm), or a column with equivalent performance. b) Chromatography column temperature. 35 ℃. c) Mobile phase. (A) acetonitrile; (B) 5 mmol/L ammonium acetate solution; see Table 1 for elution gradient reference conditions. d) Flow rate. 0.6 mL/min. e) Injection volume. 2 μL. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB 5009.282-2020 be delivered?Answer: The full copy PDF of English version of GB 5009.282-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB 5009.282-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB 5009.282-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 5009.282-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB 5009.282-2020?

A step-by-step guide to download PDF of GB 5009.282-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 5009.282-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9