GB/T 4706.96-2024 English PDFUS$1154.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 4706.96-2024: Safety of household and similar electrical appliances - Part 96: Particular requirements for floor treatment machines with or without traction drive, for commercial use Status: Valid GB/T 4706.96: Historical versions
Basic dataStandard ID: GB/T 4706.96-2024 (GB/T4706.96-2024)Description (Translated English): Safety of household and similar electrical appliances - Part 96: Particular requirements for floor treatment machines with or without traction drive, for commercial use Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K09 Classification of International Standard: 13.120 Word Count Estimation: 58,581 Date of Issue: 2024-07-24 Date of Implementation: 2026-08-01 Older Standard (superseded by this standard): GB 4706.96-2008 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 4706.96-2024: Safety of household and similar electrical appliances - Part 96: Particular requirements for floor treatment machines with or without traction drive, for commercial use---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. GB/T 4706.96-2024 English version. Safety of household and similar electrical appliances - Part 96.Particular requirements for floor treatment machines with or without traction drive, for commercial use ICS 13.120 CCSK09 National Standard of the People's Republic of China Replaces GB 4706.96-2008 Published on July 24, 2024, implemented on August 1, 2026 State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction V 1 Scope 1 2 Normative references 2 3 Terms and definitions 3 4 General requirements 5 5 General conditions for testing 6 6 Categories 6 7 Markings and instructions 6 8 Protection against contact with live parts 9 9 Starting of electric appliances 10 10 Input power and current 10 11 Fever 10 12 Empty Chapter 10 13 Leakage current and electrical strength at operating temperature 10 14 Transient overvoltage 11 15 Moisture resistance 11 16 Leakage current and electrical strength 12 17 Overload protection of transformers and related circuits 12 18 Durability12 19 Abnormal working conditions12 20 Stability and mechanical hazards 13 21 Mechanical strength 16 22 Structure 17 23 Internal wiring 20 24 Element 20 25 Power connection and external cord 21 26 Terminal block for external conductor 21 27 Grounding measures 21 28 Screws and connections 22 29 Clearances, creepage distances and solid insulation 22 30 Heat and flame retardant 22 31 Rust prevention 22 32 Radiation, toxicity and similar hazards 22 Appendix 26 Appendix A (Informative) Routine Test 27 Appendix B (Normative) Appliances powered by rechargeable batteries charged inside the appliance 28 Appendix L (Informative) Guidelines for the measurement of electrical clearances and creepage distances 34 Appendix S (normative) Appliances powered by non-rechargeable batteries or batteries charged externally to the appliance 35 Appendix AA (Normative) Prefabricated Cement Panels 38 Appendix BB (Normative) Requirements for internal combustion engine driven machines using liquefied petroleum gas 39 Appendix CC (Normative) Falling Object Protection System (FOPS)---Dynamic Test and Performance Requirements 41 Appendix DD (Informative) Noise Emission 44 Appendix EE (Informative) Vibration 46 References 47ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is Part 96 of GB/T 4706 "Safety of Household and Similar Electrical Appliances". GB/T 4706 has been published as follows part. --- Part 1.General requirements; --- Part 2.Particular requirements for electric irons; --- Part 121.Particular requirements for professional ice cream machines. This document replaces GB 4706.96-2008 "Safety of household and similar electrical appliances - Characteristics of automatic floor treatment machines for commercial and industrial use" Compared with GB 4706.96-2008, in addition to structural adjustments and editorial changes, the main technical changes are as follows. --- Changed the scope of application, deleted the appliance for cleaning carpets, and changed it to commercial electric passenger cars used on indoor and outdoor floors. and push-type machines”, and made detailed supplementary explanations; added the description of the traction drive system (see Chapter 1,.2008 Edition Chapter 1 of); --- Changed the definition of "normal operation" (see 3.1.9, 3.1.9 of the.2008 edition), and deleted the normal operation content of the dry and wet finishing machine (See 3.1.9.102 of the.2008 edition); The definitions of single-seat vehicle and wet cleaning machine have been changed (see 3.104, 3.105,.2008 edition 3.105,3.101); ---Added traction drive, recovery box, parking brake, service brake, operator presence control, guard, operator, vehicle Load, test solution, horizontal surface, inclined plane, maximum cleaning slope, maximum transport slope, built-in charger, internal power supply battery charger, commercial use, low battery voltage, hazardous voltage, battery connector, low battery voltage isolation, etc. 3.101,3.108~3.122); --- Changed the terms and definitions of walk-behind machines and ride-on machines (see 3.102, 3.103, 3.102, 3.103 of the.2008 edition, 3.104); --- Deleted the terms and definitions of the person being guided (see 3.106 of the.2008 edition); --- Added general requirements for the safety of equipment operation in "General Requirements", and clarified that "equipment" in "Part 1" of the standard should be included in this part Interpreted as "machine" (see Chapter 4); --- Added the requirements for measuring voltage in the general conditions of the test (see 5.8.1); added the test requirements for battery-powered appliances (see 5.17); Added storage and use time limit requirements for working fluid during testing (see 5.101); Added test payload requirements (see 5.102); added test conditions for machines with a single-seat vehicle (see 5.104); added fuel for machines driven by internal combustion engines Material requirements (see 5.105); Deleted the test condition requirements for the equipment loaded with additional weight (see 5.102 of the.2008 edition); --- Added the electric shock protection category of the machine subdivided according to the DC/AC working voltage (see 6.1); --- Added marking requirements for the machine body and power cleaning head (see 7.1, 7.1.101, 7.1.102); changed the power cleaning head and electric Clause number for source socket marking requirements (see 7.1.101, 7.1.102, 7.101, 7.102 of the.2008 edition); --- Added content requirements in the machine instructions (see 7.12); Added vibration information requirements in the instructions (see 7.12.103); Added the requirement of “original instructions for use” in the instructions for use (see 7.13); --- Deleted the condition of whether the standard battery is a live part (see 8.1 of the.2008 edition), and the note "Water and water-soluble detergents are considered as conductive The text of the article was changed from "main text" to "main text" (see 8.1, 8.1 of the.2008 edition), and the description of the electric shock hazard in the BLV circuit and the battery connection were added. Test requirements for connectors (see 8.1); --- Added a case where accessible parts are not charged (see 8.1.4); --- Added access requirements for BLV battery connectors (see 8.1.101); --- Added the requirement that the machine should only be started by the action of the designated control device (see Chapter 9); --- Deleted the measurement requirements for power cleaning head input power (see 10.1 of the.2008 edition); --- Added instructions for not testing the liquid storage tanks of some machines (see 15.2); --- Changed some notes to the main text (see 19.7, 19.101, 19.7, 19.101 of the.2008 edition); added the abnormal working test of the machine The requirements of the clauses to be met when the equipment can still work normally after inspection (see 19.13); --- Changed the slope requirements in the stability test (see 20.1, 20.1 of the.2008 edition); added recovery tanks, fuel tanks, and liquid Stability requirements for machines driven by internal combustion engines powered by petroleum gas (see 20.114 to 20.116); --- Added test requirements for machine parts subjected to mechanical shock (see 21.101); --- Added structural requirements for pressure hoses, lines and components (see 22.7); deleted the structural requirements for battery-powered appliances (see 22.102~22.104 of the.2008 edition); added the protection requirements for split rims used for pneumatic tires and the structure of protective devices; Structural requirements, machine design and other device requirements (see 22.111 to 22.124); --- Added instructions for alternative conductors for internal flexible cords (see 23.102); --- Increased the requirements and methods for arc resistance of machines (see 24.103); --- Added the type of power cord (see 25.7); --- Added the requirement for the number of full threads of the terminal that uses threaded screws or bolts to fix the conductive lugs to the terminal board (see 28.101); --- Added the applicable description of 30.2.2 and 30.2.3 (see 30.2); --- Added requirements for appliances powered by rechargeable batteries charged inside the appliance (see Appendix B); --- Added requirements for appliances powered by non-rechargeable batteries or batteries charged externally to the appliance (see Appendix S); --- Added requirements for internal combustion engine driven machines using liquefied petroleum gas (see Appendix BB). This document is equivalent to IEC 60335-2-72.2016 "Household and similar electrical appliances - Safety - Part 2-72.Commercial use with or without electrical appliances" Particular requirements for floor treatment machines without traction drive. The following minimal editorial changes were made to this document. --- The name of the standard was changed to "Safety of Household and Similar Electrical Appliances Part 96.Ground Conductors for Commercial Use with or without Traction Drive Special requirements for board processing machines" to enhance the coordination of the standard system. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by China Light Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Household Electrical Appliances (SAC/TC46). This document was drafted by. China Household Electrical Appliance Research Institute, Jiangsu Midea Cleaning Appliance Co., Ltd., Lake Electric Co., Ltd., Shanghai Feike Electric Co., Ltd. and China Academy of Building Research (Beijing) Testing and Certification Co., Ltd. The main drafters of this document are. Lu Jianguo, Zhu Yan, Zhou Lei, Qin Weihua, Li Shanshan, Zhao Guangzhan, Xu Xin, and Zhang Xumeng. The previous versions of this document and the documents it replaces are as follows. ---First published in.2008 as GB 4706.96-2008; ---This is the first revision.IntroductionGB/T 4706 "Safety of Household and Similar Electrical Appliances" adopts most of IEC 60335.On this basis, GB/T 4706 refers to The structure of IEC 60335 is divided into several parts, consisting of general requirements and special requirements. Part 1 is general requirements, and the other parts are For products covered by special requirements, their safety requirements are general requirements used in combination with the special requirements. The requirements include supplements and modifications to the corresponding clauses in the general requirements to provide complete requirements for each product. This document is the protection requirements for electrical, mechanical, thermal, fire and radiation risks when the appliance is used normally in accordance with the instructions. This document also covers abnormal conditions that may occur during use and considers how electromagnetic interference may affect the safe operation of the equipment. This document has taken into account the requirements specified in GB/T 16895 "Low Voltage Electrical Installations". The appliance is connected to the power supply in accordance with the electrical wiring rules. requirements are coordinated. If multiple functions of an appliance involve other parts of GB/T 4706, the other parts shall apply to the appliance separately as long as it is reasonable. Each function. If applicable, consider the impact of one function on other functions. When no additional requirements are given in other parts for hazards already included in this document, GB/T 4706.1 applies. GB/T 4706 is a standard covering appliance safety and takes precedence over general standards/horizontal standards covering the same subject. This document is used in conjunction with GB/T 4706.1-2024 "Safety of Household and Similar Electrical Appliances Part 1.General Requirements". The part marked "applicable" in the document indicates that GB/T 4706.1-2024 "Safety of Household and Similar Electrical Appliances - Part 1.General Requirements" The corresponding clauses in the "Requirements" shall apply to this document; for the parts marked "replace" in this document, the clauses in this document shall prevail; The "Add" part indicates that in addition to complying with the corresponding clauses in GB/T 4706.1-2024, the additional clauses in this document must also be complied with. Clause; The part marked "modified" in this document indicates that the corresponding clauses of GB/T 4706.1-2024 are modified. Safety of household and similar electrical appliances Part 96.Commercial use with or without traction Particular requirements for powered floor treatment machines1 ScopeThis chapter of GB/T 4706.1-2024 is replaced by the following. This document covers the safety of commercial electric ride-on and push-behind machines. This document applies to commercial electric ride-on and push-behind machines intended for use indoors or outdoors in the following applications. On the floor. ---cleaning; ---scrub; ---Wet or dry vacuuming; ---polishing; ---Waxing, using sealing products and powdered detergents; ---Detergent cleaning. The cleaning trajectory of the machine is mainly linear, rather than lateral or periodic. Note 101.In contrast, the cleaning trajectory of the machine specified in GB/T 4706.86 is mainly horizontal and periodic. NOTE 102 This document is applicable to commercial machines. The following items are given as the places of use included in the partial scope. ---Public places, such as hotels, schools, and hospitals; ---Industrial sites, such as factories and production workshops; ---Retail outlets, such as shops and supermarkets; ---Business places, such as offices and banks; ---All other uses except general household cleaning. The machine can be equipped with a traction drive system. It includes the following power systems. ---Internal combustion engine; ---Power supply drive motor, suitable for single-phase appliances with rated voltage not exceeding 250V and other appliances with rated voltage not exceeding 480V appliance; ---Battery-driven motor. Battery-powered machines may be equipped with a built-in battery charger. This document does not apply to. ---Household floor treatment appliances (IEC 60335-2-10); ---Commercial floor treatment machines (IEC 60335-2-67); --- Commercial spray suction appliances (IEC 60335-2-68); --- Commercial wet and dry vacuum cleaners (including power brushes) (IEC 60335-2-69); ---Road sweeper; NOTE 103.In Europe, EN 13019 covers road sweepers. ---Machines designed for slopes with a gradient of more than 20%; ---Machines equipped with a power take-off (PTO); --- Machines designed for use in corrosive or explosive atmospheres (dust, vapor or gas); --- Machines designed for extracting harmful dust, flammable substances or hot particles (as specified in GB/T 4706.93); --- Machines designed for use on vehicles, ships or aircraft. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4706.96-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 4706.96-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 4706.96-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4706.96-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 4706.96-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4706.96-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
