GB/T 3863-2025 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 3863-2025: Industrial oxygen Status: Valid GB/T 3863: Historical versions
Basic dataStandard ID: GB/T 3863-2025 (GB/T3863-2025)Description (Translated English): Industrial oxygen Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G86 Classification of International Standard: 71.100.20 Word Count Estimation: 14,129 Date of Issue: 2025-08-01 Date of Implementation: 2026-02-01 Older Standard (superseded by this standard): GB/T 3863-2008 Issuing agency(ies): State Administration for Market Regulation, Standardization Administration of China GB/T 3863-2025: Industrial oxygen---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT3863-2025ICS 71.100.20 CCSG86 National Standard of the People's Republic of China Replaces GB/T 3863-2008 Industrial oxygen Released on August 1, 2025 Implementation on February 1, 2026 State Administration for Market Regulation The National Standardization Administration issued PrefaceThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 3863-2008 Industrial Oxygen. Compared with GB/T 3863-2008, except for structural adjustments and editorial changes, In addition, the main technical changes are as follows. --- Deleted the content related to the use, molecular formula and relative molecular mass of industrial oxygen in the scope (see Chapter 1,.2008 edition Chapter 1); --- Added a chapter on "Terms and Definitions" (see Chapter 3); --- Deleted the requirement for 99.2% purity industrial oxygen, added the requirement for industrial oxygen in storage tanks, and changed the limit requirement for moisture content (See Chapter 4, Chapter 3 of the.2008 edition); --- Added the requirements for industrial oxygen batching (see 5.1); --- Changed the requirements for industrial oxygen sampling and sampling safety (see 5.2, 4.1.2 of the.2008 edition); --- Changed the requirements for industrial oxygen sampling (see 5.3, 4.1.3 and 4.1.4 of the.2008 edition); --- Changed the method for determining oxygen content (see 6.1, 4.2 of the.2008 edition); --- Added the determination method of methane content (see 6.2); --- Changed the method for determining moisture content (see 6.3, 4.3 of the.2008 edition); --- Added requirements for exhaust gas treatment (see 6.4); --- Changed the requirements of the inspection rules and added provisions for numerical rounding (see Chapter 7, 4.1 of the.2008 edition); --- Changed the marking requirements (see 8.1, Chapter 5 of the.2008 edition); --- Changed the labeling requirements and added normative references (see 8.2, 5.12 of the.2008 edition); --- Added accompanying document requirements (see 8.3); --- Changed the provisions on packaging, filling, transportation and storage (see Chapter 9, Chapter 5 of the.2008 edition); --- Added safety information for oxygen (see Chapter 10). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Petroleum and Chemical Industry Federation. This document is under the jurisdiction of the National Gas Standardization Technical Committee (SAC/TC206). This document was drafted by. Guangdong Huate Gas Co., Ltd., Dalian Date Gas Co., Ltd., Hangzhou New Century Mixed Gas Co., Ltd. Company, Southwest Chemical Research and Design Institute Co., Ltd., Zhejiang Haichang Gas Co., Ltd., Zhejiang Shaxing Technology Co., Ltd., Haohua Gas Southwest Branch of Guangdong South China Special Gas Research Institute Co., Ltd., Guizhou Yagang Gas Co., Ltd., Shaanxi Qinfeng Gas Co., Ltd. Co., Ltd., Shandong Jingbo Petrochemical Co., Ltd., Dalian Guangming Chemical Industry Gas Quality Monitoring Center Co., Ltd., Shanghai Fanwei Instrument Equipment Co., Ltd., China Institute of Metrology and Measurement, China Industrial Gases Association, Kunming Guangruida Special Gas Co., Ltd., China Electronic System Engineering Fourth Construction Co., Ltd., Shanghai Huaai Chromatography Analysis Technology Co., Ltd., Guizhou Product Quality Inspection and Testing Institute, China Modern Science and Technology College of Jiliang University, Harbin Liming Gas Co., Ltd. The main drafters of this document are. Fu Zhuhong, Li Fufen, Jiang Hongda, Na Zhaoyu, Chen Chongwen, Jin Congyang, Lin Dingbiao, Chen Yali, Tang Xiamei, Lai Xiaofeng, Ding Guanghua, Luo Meijin, Tang Zhongwei, Huang Xiaoqiang, Zhao Lixia, Xiang Jin, Chen Xiaobo, Zhu Ruijun, Wu Wen, Bao Xuewei, Xing Maosen, Han Lingli, Sun Xin, Yang Yangzhongfu, Bo Chungan, Gao Jing, Wang Jianjian, Cheng Huapeng, Ma Yichun, Shao Chenggang, and Lü Houchun. The previous versions of this document and the documents it replaces are as follows. ---First published in 1983 as GB/T 3863-1983 "Gaseous Oxygen for Industrial Use"; ---First revised in.1995 as GB/T 3863-1995 "Oxygen for Industrial Use"; --- Revised for the second time in.2008 to GB/T 3863-2008 "Industrial Oxygen"; ---This is the third revision. Industrial oxygen1 ScopeThis document specifies the technical requirements for industrial oxygen as well as batching, sampling, testing methods, inspection rules, marking, labeling, accompanying documents, It also describes the requirements for packaging, filling, transportation and storage, and provides relevant test methods and safety information for industrial oxygen. This document applies to gaseous and liquid industrial oxygen produced by separation from air and by water electrolysis.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 150 (all parts) Pressure vessels GB 190 Dangerous Goods Packaging Marking GB/T 191 Pictorial markings for packaging, storage and transportation GB/T 5099 (all parts) Steel seamless gas cylinders GB/T 7144 Color marking of gas cylinders GB/T 8170 Rules for rounding off values and expression and determination of limit values GB/T 8982 Medical and aviation breathing oxygen GB/T 8984 Gas analysis - Determination of trace carbon monoxide, carbon dioxide and hydrocarbons in gases - Flame ionization Gas chromatography GB/T 11640 Aluminum alloy seamless gas cylinders GB/T 14194 Compressed gas cylinder filling regulations GB 15258 Provisions for the Preparation of Chemical Safety Labels GB/T 15382 General technical requirements for gas cylinder valves GB/T 16804 Gas Cylinder Warning Labels GB/T 16483 Contents and order of items in safety data sheets for chemicals GB/T 24159 Welded insulated gas cylinders GB/T 27550 Safety technical requirements for gas cylinder filling stations GB/T 28051 Filling regulations for welded insulated gas cylinders GB/T 28054 Seamless steel gas cylinder clusters GB/T 30685 Technical requirements for upright road transport of gas cylinders GB/T 33145 Large volume seamless steel gas cylinders GB/T 34525 Safety regulations for the handling, loading and unloading, storage and use of gas cylinders GB/T 43306 Guidelines for Gas Analysis Sampling JT/T 617 (all parts) Rules for the transport of dangerous goods by road NB/T 10354 Long tube trailer NB/T 10355 Tube Bundle Container TSGR0005 Safety Technical Supervision Regulations for Mobile Pressure Vessels ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3863-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 3863-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 3863-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3863-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 3863-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3863-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
