GB 36246-2018 English PDF

US$1019.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 36246-2018: Sports areas with synthetic surfaces for primary and middle schools
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 36246-2018	1019	Add to Cart	8 days	Sports areas with synthetic surfaces for primary and middle schools	Valid

Similar standards

GB/T 41526.1   GB/T 20394   GB 24429   GB/T 18266.2   GB/T 45544   

Basic data

Standard ID: GB 36246-2018 (GB36246-2018)
Description (Translated English): Sports areas with synthetic surfaces for primary and middle schools
Sector / Industry: National Standard
Classification of Chinese Standard: Y55
Classification of International Standard: 03.180
Word Count Estimation: 51,573
Date of Issue: 2018-05-14
Date of Implementation: 2018-11-01
Older Standard (superseded by this standard): GB/T 19851.11-2005
Quoted Standard: GB/T 4498.1-2013; GB/T 6682-2008; GB/T 10111-2008; GB/T 10654-2001; GB/T 14833-2011; GB/T 14837.1; GB/T 14837.2; GB/T 16422.2-2014; GB/T 16483; GB/T 18204.2; GB/T 18446; GB 18581-2009; GB 18583; GB/T 18883-2002; GB/T 22517.6; GB/T 23986-2009; GB/T 23991
Regulation (derived from): National Standards Announcement No. 6 of 2018
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB 36246-2018: Sports areas with synthetic surfaces for primary and middle schools

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Primary and secondary school composite material surface sports ground) ICS 03.180 Y55 National Standards of People's Republic of China Replace GB/T 19851.11-2005 Primary and secondary school synthetic material surface sports venue Published on.2018-05-14 2018-11-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Category 3 5 Technical requirements 3 5.1 Paving requirements 3 5.2 thickness 4 5.3 Physical and mechanical properties 4 5.4 Synthetic material surface layer resistant to artificial weathering 5 5.5 Content of inorganic fillers and polymers in the surface layer of synthetic materials 5 5.6 Limits and odors of harmful substances in finished products and raw materials of synthetic materials 5 6 Test method 8 6.1 Determination of thickness 8 6.2 Determination of impact absorption 8 6.3 Determination of vertical deformation 8 6.4 Determination of tensile strength and elongation at break 8 6.5 Determination of anti-slip value 8 6.6 Determination of flame retardant properties 8 6.7 Determination of the breaking force of straw 6.8 Determination of single tuft pullout force 8 6.9 Determination of aging resistance 8 6.10 Determination of the content of inorganic fillers 8 6.11 Determination of total amount of polymer 9 6.12 Determination of the content of harmful substances in finished products and solid raw materials of synthetic materials 9 6.13 Determination of the release of harmful substances in the finished surface of synthetic materials 9 6.14 Odour Rating 9 6.15 Determination of the content of harmful substances in non-solid materials of synthetic materials surface 9 7 sampling requirements 10 7.1 Witness sampling 10 7.2 Synthetic material top layer raw material sample 10 7.3 Synthetic material surface finished product sample 10 7.4 Transportation, storage and testing time 10 8 Inspection rules 11 8.1 Acceptance inspection 11 8.2 Type inspection 11 8.3 Determination of test results 11 8.4 Re-inspection rule 11 8.5 Site Compliance Judgment Principle 11 Appendix A (Normative) Determination of phthalate content by gas chromatography-mass spectrometry 12 A.1 Overview 12 A.2 Principle 12 A.3 Materials and reagents 12 A.4 Instruments and equipment 12 A.5 Analysis step 13 A.6 Calculation of results 14 A.7 Detection limit 15 A.8 Precision 15 Appendix B (Normative) Test of 18 polycyclic aromatic hydrocarbons by gas chromatography-mass spectrometry 16 B.1 Overview 16 B.2 Principle 16 B.3 Materials and reagents 16 B.4 Instruments and equipment 17 B.5 Analysis step 17 B.6 Calculation of results 18 B.7 Detection limit 19 B.8 Precision 19 Appendix C (Normative Appendix) Method for measuring the thickness of the ground layer of ball courts and other active fields 20 C.1 Measuring instrument 20 C.2 Measurement method 20 C.3 Calculation of results 20 Appendix D (Normative Appendix) Method for the detection of surface impact absorption of synthetic materials 21 D.1 Detection device 21 D.2 Detection method 22 D.3 Results calculation 22 Appendix E (Normative Appendix) Method for detecting vertical deformation of synthetic materials E.1 Detection device 23 E.2 Test method 24 E.3 Results indicate 24 Appendix F (Normative Appendix) Method for detecting the anti-sliding value of synthetic materials F.1 detection device 25 F.2 Detection method 25 Appendix G (Normative) Test of Short-chain Chlorinated Paraffin (C10-C13) Content Gas Chromatography-Electron Capture Negative Chemical Ionization Source Mass spectrometry 27 G.1 Overview 27 G.2 Principle 27 G.3 Reagents and materials 27 G.4 Instruments and equipment 27 G.5 Analysis step 28 G.6 Calculation of results 29 G.7 Detection limit 30 G.8 precision 30 Appendix H (Normative) Test for 4,4'-diamino-3,3'-dichlorodiphenylmethane (MOCA) content 31 H.1 Overview 31 H.2 Method 1. Gas chromatography-mass spectrometry (arbitration method) 31 H.3 Method 2. High Performance Liquid Chromatography 33 Appendix I (Normative) Test for the release of hazardous substances Small environmental test chamber method 36 I.1 Overview 36 I.2 Principle 36 I.3 Small Environmental Test Chamber 36 I.4 Environmental test cabin test conditions 37 I.5 Preparation of samples 37 I.6 Test Step 37 I.7 Thermal desorption test method for carbon disulfide in air 38 I.8 Calculation of results 39 I.9 Detection limit 40 Appendix J (Normative) Scent Assessment 41 J.1 Test setup and assessment team 41 J.2 Sample Preparation 41 J.3 Odour Rating 41 J.4 Odour rating level 41 J.5 Outcome statement 42 Appendix K (Normative) Rules for the determination of on-site sampling locations for synthetic materials sites 43 K.1 Principle 43 K.2 Equipment 43 K.3 Test Method 43 Reference 44 Figure D.1 Shock Absorption Tester 21 Figure E.1 Vertical Deformation Tester 23 Figure F.1 Portable Resistance Tester 25 Figure I.1 Schematic diagram of a small environmental test chamber 36 Table 1 Cast-in-place and prefabricated surface layer thickness requirements 4 Table 2 Physical and mechanical properties of cast-in-place and prefabricated surface layers 4 Table 3 Physical and mechanical properties of artificial grass finish and straw Table 4 Limits and odor requirements for hazardous substances in cast-in-place and prefabricated finishes Table 5 Limits for Hazardous Substances in Finished Artificial Grass Finishes 6 Table 6 Limits and odor requirements for hazardous substances in solid raw materials 7 Table 7 Limits for hazardous substances in non-solid materials 7 Table A.1 Qualitative Reference Ions and Quantitative Selective Ions for Six Phthalate Esters Table A.2 Reference detection limits for the content of 6 phthalate compounds 15 Table B.1 18 Polycyclic Aromatic Hydrocarbons and Internal Standards Qualitative Reference Ions and Quantitative Selective Ions 18 Table G.1 Qualitative Reference Ions and Quantitative Selective Ions for Short-Chain Chlorinated Paraffins (C10-C13) Table H.1 Qualitative Reference Ions and Quantitative Selection Ions for MOCA and Internal Standards Table I.1 Air sampling and analysis methods for environmental test cabins 38 Table J.1 Odour class 41

Foreword

The full technical content of this standard is mandatory. This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 19851.11-2005 "Sports equipment and venues for primary and secondary schools - Part 11. Synthetic material surface sports field Land. Compared with GB/T 19851.11-2005, the main technical changes except editorial changes are as follows. ---Increased synthetic material surface layer, cast-in-place surface layer, prefabricated surface layer, artificial grass surface layer, water-permeable surface layer, non-permeable surface layer, solid Raw materials, non-solid materials, thickness, impact absorption, vertical deformation, tensile strength, elongation at break, slip resistance, aging resistance, resistance Terms and definitions of fuel properties, total volatile organic compounds, volatile organic compounds, removed synthetic layers, flatness, pressure Contraction recovery rate, terminology and definition of Class 1 flame retardant (see Chapter 3, Chapter 3 of the.2005 edition); --- Added classification (see Chapter 4); --- Increased paving requirements (see 5.1); --- Revised the thickness requirements (see 5.2, 4.4 of the.2005 edition); --- Removed the appearance and specifications, marking lines, flatness requirements (see.2005 edition of 4.1, 4.2, 4.3); --- Increased physical and mechanical properties of impact absorption, vertical deformation, anti-sliding value items and indicators, deleted hardness (Shao A), compression Recovery rate, rebound value performance requirements, revised tensile strength items and index requirements, modified elongation at break and its index requirements (See 5.3.1, 4.6 of the.2005 edition); --- Modified test methods for thickness, tensile strength, elongation at break, and flame retardancy (see 6.1, 6.4, 6.6, appendix for.2005 edition) B, 5.6 and Appendix E); --- Increased test methods for impact absorption, vertical deformation and slip resistance (see Appendix D, Appendix E and Appendix F); --- Increase the physical and mechanical performance requirements and test methods of artificial grass surface layer (see 5.3.2, 6.2, 6.3, 6.7, 6.8); --- Increased the aging resistance requirements and test methods of synthetic materials (see 5.4, 6.9); --- Increase the content of inorganic fillers in the surface layer of synthetic materials other than artificial grass surface layer and test methods (see 5.5.1, 6.10); --- Increased total polymer content and test method for synthetic material surface anti-slip rubber particles and artificial grass surface-filled synthetic material particles (see 5.5.2, 6.11); --- Increased the limit requirements and odor requirements and test methods for harmful substances in finished products and raw materials of synthetic material surface sports sites (see 5.6, Appendix A, Appendix B, Appendix G, Appendix H, Appendix I, Appendix J and 6.12, 6.13, 6.14, 6.15); --- Increased sampling requirements (see Chapter 7); --- Added inspection rules (see Chapter 8). This standard is proposed and managed by the Ministry of Education of the People's Republic of China. This standard was drafted. Education Equipment Research and Development Center of the Ministry of Education, Tsinghua University, China Building Materials Inspection and Certification Group Co., Ltd. Division, Shenzhen Institute of Metrology and Quality Inspection, Shanghai Jianke Inspection Co., Ltd., China Academy of Environmental Sciences, Nanjing Forestry University, Shandong Province Product Quality Inspection Institute, Zhejiang Institute of Furniture and Hardware, Solid Waste and Chemicals Management Technology Center of the Ministry of Environmental Protection, Guangzhou Tong Xinkang Sports Equipment Co., Ltd., Jiangsu Provincial Product Quality Supervision and Inspection Institute, Guangzhou Quality Supervision and Inspection Institute, Shanghai Chemical Building Materials Industry association, Wuhan Institute of Physical Education, China Polyurethane Industry Association, Guozheng Inspection and Certification Co., Ltd., Sports Equipment and Equipment of the State Sports General Administration Xin, Shandong Taishan Sports Engineering Co., Ltd., Shanghai Hangkuan Stadium Facilities Engineering Co., Ltd., Guangzhou Dayang Yuanheng Chemical Co., Ltd., Tudor Chengxin Materials Technology (Shanghai) Co., Ltd., Guangzhou Jierui Sports Facilities Co., Ltd., Shenzhen Leading Sports Industrial Co., Ltd., McGrady Lawn Co., Ltd., Qingdao Kexing Education Equipment Co., Ltd. The main drafters of this standard. Zhang Pengyi, Li Ping, Guo Zhongbao, Wu Haitao, Che Yanping, Dang Jianwei, Yu Ruojun, Luo Zhenyang, Cai Chenmin, Ding Qiong, Jin Fei, Zhu Xiaocui, Zhang Yaodong, Zhang Bin, Wang Weishan, Meng Qingsheng, Lou Minggang, Li Jianbo, Zheng Weitao, Chen Yu, Hou Libo, Wu Ying, Chen Lin, Huang Yuliang, Wang Gang, Jia Zhiyong, Wang Ji'an, Yu Xun, Zhou Licheng, Guo Fei, Qi Zhiyong, Li Zhishi, Guo Long, Shi Jianhua, Lin Fanqiu, Wu Xue, Sun Zhen. The previous versions of the standards replaced by this standard are. ---GB/T 19851.11-2005. Primary and secondary school synthetic material surface sports venue

1 Scope

This standard specifies the terms and definitions, classification, technical requirements, test methods, sampling requirements and requirements for the surface sports ground of synthetic materials in primary and secondary schools. testing regulations. This standard is applicable to the design, material selection, paving, testing and design of outdoor synthetic material surface sports venues for new, rebuilt and expanded schools. acceptance.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 4498.1-2013 Determination of rubber ash - Part 1 GB/T 6682-2008 Analytical laboratory water specifications and test methods GB/T 10111-2008 Generation of random numbers and its application in product quality sampling inspection GB/T 10654-2001 Determination of tensile strength and elongation at break of polymer porous elastic materials GB/T 14833-2011 synthetic material track surface layer Rubber and rubber products - Determination of the composition of vulcanizates and unvulsives - Part 1 . Butadiene Rubber, ethylene-propylene binary and terpolymer, isobutylene-isoprene rubber, isoprene rubber, styrene-butadiene rubber Rubber and rubber products - Determination of the composition of vulcanized and unvulcanized rubber - Part 2. Acrylonitrile Butadiene rubber and halogenated butyl rubber GB/T 16422.2-2014 exposure test methods for plastics - Part 2. Xenon arc lamps GB/T 16483 chemical safety data sheet content and project sequence GB/T 18204.2 Methods of sanitary inspection in public places - Part 2. Chemical contaminants GB/T 18446 Determination of diisocyanate monomers in paint-based isocyanate resins for lacquers and varnishes GB 18581-2009 Indoor decoration materials Limits of harmful substances in solvent-based wood coatings GB 18583 Limits of harmful substances in adhesives for interior decoration materials GB/T 18883-2002 Indoor Air Quality Standard GB/T 22517.6 Requirements and test methods for sports grounds - Part 6. Track and field venues GB/T 23986-2009 Determination of volatile organic compounds (VOC) content of varnishes and varnishes. GB/T 23991 Determination of soluble harmful elements in paints HJ865-2017 Technical Specifications for the construction of the odor olfactory laboratory QB/T 1090-2001 Test method for pull-out force of carpet piles ISO 16000-3 Indoor air - Part 3. Determination of formaldehyde and other carbonyl compounds in indoor air and laboratory air Dynamic sampling method (Indoorair-Part 3. Determination offormaldehydeandothercarbonylcompoundsinindoor airandtestchamberair-Activesamplingmethod) ISO 16000-6 Indoor air Part 6. by TenaxTA sorbent, thermal desorption and mass spectrometry (MS) or mass spectrometry - fire Gas Chromatography Active Sampling of Flame Ionization Detector (MS-FID) for Determination of Volatile Organic Compounds in Indoor and Laboratory Air (Indoorair-Part 6. Determinationof volatileorganiccompoundsinindoorandtestchamberairby ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 36246-2018_English be delivered?

Answer: Upon your order, we will start to translate GB 36246-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 36246-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB 36246-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.