GB 35181-2025 English PDFUS$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 35181-2025: Rules for major fire potential judgement Status: Valid GB 35181: Historical versions
Basic dataStandard ID: GB 35181-2025 (GB35181-2025)Description (Translated English): Rules for major fire potential judgement Sector / Industry: National Standard Classification of Chinese Standard: C82 Classification of International Standard: 13.220.20 Word Count Estimation: 14,149 Date of Issue: 2025-04-25 Date of Implementation: 2025-11-01 Older Standard (superseded by this standard): GB 35181-2017 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB 35181-2025: Rules for major fire potential judgement---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.National Standard of the People's Republic of China ICS 13.220.20CCS C 82 Rules for determining major fire hazards 2025-04-25 Release 2025-11-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Replaces GB 35181-2017 Table of contentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Decision Rules 2 5 Direct determination factors 3 6 Comprehensive judgment factors 4 Appendix A (Normative) Rules for determining whether the automatic fire alarm system and fixed fire extinguishing facilities cannot operate normally6 Reference 7ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting is required. This document replaces GB 35181-2017 "Methods for determining major fire hazards". Compared with GB 35181-2017, in addition to structural adjustments and In addition to editorial changes, the main technical changes are as follows. a) The term “important places” and its definition (see 3.6 of the.2017 version) have been deleted, and the terms “children’s activity places”, “elderly people’s places” and “children’s activity places” have been added. "labor-intensive enterprises" and "multi-format mixed production and operation sites" and their definitions (see Chapter 3); b) The principles and procedures for determining major fire hazards have been deleted (see Chapter 4 of the.2017 edition); c) The principle that a major fire hazard should not be determined or used as a factor in the determination has been changed (see 4.2, 5.1.3 of the.2017 edition); d) The direct and comprehensive factors for determining major fire hazards have been changed (see Chapter 5 and Chapter 6,.2017 Edition). Chapter 6, Chapter 7); e) Added rules for determining when the automatic fire alarm system and fixed fire-fighting facilities cannot operate normally (see Appendix A). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the National Fire and Rescue Administration. The previous versions of this document and the documents it replaces are as follows. --First published in.2017 as GB 35181-2017; --This is the first revision.IntroductionMajor fire hazards can easily lead to fire accidents that cause heavy casualties, property losses and serious social impacts. and eliminate major fire hazards, which is of great significance to preventing and reducing the occurrence of fires, safeguarding social and economic development, the safety of people’s lives and property, and maintaining social Stability is of great significance. The formulation, release and implementation of this document provides citizens, legal persons, other organizations and fire rescue agencies with a standard for determining major fire hazards. It also provides a technical basis for discovering, reporting and rectifying fire hazards. Rules for determining major fire hazards1 ScopeThis document establishes the rules for determining major fire hazards. This document is applicable to the determination of major fire hazards in buildings and places.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB 8624 Classification of combustion performance of building materials and products GB 25506 General technical requirements for fire control rooms GB 30000.1 Chemical Classification and Labelling Specification Part 1.General GB 50016 Code for Fire Protection Design of Buildings GB 50072 Cold Storage Design Standard GB 50074 Design specification for petroleum depots GB 50084 Design specification for automatic sprinkler fire extinguishing systems GB 50116 Design specification for automatic fire alarm systems GB 50156 Technical Standard for Automobile Refueling, Gasification and Hydrogenation Stations GB 50222 Code for fire protection design of interior decoration of buildings GB 50974 Technical specification for fire water supply and fire hydrant systems GB 55036 General specification for fire protection facilities GB 55037 General code for fire protection of buildings XF 703 Fire safety technical requirements for accommodation, production, storage and operation sites3 Terms and definitionsGB 8624, GB 25506, GB 30000.1, GB 50016, GB 50072, GB 50074, GB 50084, GB 50116, GB 50156, The terms and definitions defined in GB 50222, GB 50974, GB 55036, GB 55037, XF 703 and the following apply to this document. 3.1 major fire potential Violation of fire protection laws and regulations, non-compliance with fire protection technical standards, and likely to lead to major or extremely major fire accidents or serious social impacts Potential unsafe factors. 3.2 Occupancy for public amusement An indoor place that has cultural entertainment, fitness and leisure functions and is open to the public. Note. This includes but is not limited to theaters, auditoriums and other performance and screening venues, dance halls, karaoke halls and other singing and dancing entertainment venues, nightclubs with entertainment functions, music halls, etc. Tea houses and restaurants, amusement and recreation venues, bowling alleys, roller skating rinks, sauna rooms and other commercial fitness and leisure venues. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 35181-2025_English be delivered?Answer: Upon your order, we will start to translate GB 35181-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 35181-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB 35181-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB 35181-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 35181-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
