GB 1975-2010 English PDF

US$319.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 1975-2010: National food safety standards of food additives agar (agar)
Status: Obsolete

GB 1975: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 1975-2010	319	Add to Cart	3 days	National food safety standards of food additives agar (agar)	Obsolete
GB 1975-1980	239	Add to Cart	2 days	Food additive--Agar	Obsolete

Similar standards

GB 1886.64   GB 1886.41   GB 1886.29   GB 1886.173   GB 1886.176   GB 1886.169   

Basic data

Standard ID: GB 1975-2010 (GB1975-2010)
Description (Translated English): National food safety standards of food additives agar (agar)
Sector / Industry: National Standard
Classification of Chinese Standard: X41
Classification of International Standard: 67.220.20
Word Count Estimation: 8,834
Date of Issue: 2010-12-21
Date of Implementation: 2011-02-21
Older Standard (superseded by this standard): GB 1975-1980
Quoted Standard: GB 5009.3; GB 5009.4; GB 5009.74; GB 5009.75; GB 5009.76
Regulation (derived from): Ministry of Health Bulletin No. 19 of 2010
Issuing agency(ies): Ministry of Health of the People's Republic of China
Summary: This Chinese standard applies to agar (Gelidum amausii L.), seaweed (Porphyra), Gracilaria (Gracilaria Grev) and other red algae as raw material by leaching, dehydration and other processing of food additives made ??from agar (agar).

GB 1975-2010: National food safety standards of food additives agar (agar)

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
National food safety standards of food additives agar (agar) National Standards of People's Republic of China People's Republic of China Ministry of Health issued Issued on. 2010-12-21 2011-02-21 implementation National Food Safety Standard Food Additives Agar (Agar)

Foreword

This standard replaces GB 1975-1980 "Food Additives Agar." This standard compared with GB 1975-1980 The main changes are as follows. - The standard name changed to "Food Additives Agar (Agar)"; - Increased gel strength index, and as a product specification division basis; - Loss on drying to moisture; - Residue on ignition to ash; - Remove Suction power indicator; - Heavy metal indicator to ≤20mg/kg, arsenic project to ≤3mg/kg, increasing the lead project ≤5mg/kg; - The relevant test methods included in the appendix. This standard, Annexes A and B are normative appendix. This standard replaces the previous standard release case. GB 1975-1980. National Food Safety Standard Food Additives Agar (Agar)

1 Scope

This standard applies to seaweed (Gelidum amausii L.), laver (Porphyra), Gracilaria (Gracilaria Grev) And other red algae as raw material, extraction, dehydration and other processing of food additives made of agar (Agar).

2 Normative references

The standard file referenced in the application of this standard is essential. For cited documents with dates, only the date of Version applies to this standard. For undated references, the latest edition (including any amendments) applies to this standard.

3 Technical requirements

3.1 Sensory requirements. comply with Table 1. Table 1 Sensory requirements Project requires test methods White or light yellow in color lit, odor-free environment, the sample in the flat white porcelain plate, View Observed specimen shape, color. Smell the odor. When a sample suspected of smell, can A small amount of sample is placed in a closed cup, with 60 ℃ ~ 70 ℃ warm water immersion 3min ~ 5min later, he opened the lid, and immediately opened the lid while sniffing the area above the cup mouth. Odor no odor Uniform strip or powder form 3.2 Physical indicators. to comply with Table 2. Table 2. Physical and chemical indicators 3.3 Specifications Product specifications according to the gel strength of the different divisions, divided into low intensity, medium intensity, high intensity, high intensity, shall comply with the provisions in Table 3. Item Index Test Method Water, w /% ≤ 22 GB 5009.3a Ash, w /% ≤ 5 GB 5009.4b Starch test by testing in Appendix A A.3 Water-insoluble, w /% ≤ 1 Appendix A A.4 Heavy metals (Pb)/(mg/kg) ≤ 20 GB/T 5009.74 Lead (Pb)/(mg/kg) ≤ 5 GB/T 5009.75 Arsenic (As)/(mg/kg) ≤ 3 GB/T 5009.76 a sample quantity is 1g ~ 2g. b sample weight 1g. Product Specifications Table 3 units of grams per square centimeter Specifications gel strength (1.5% solution, 20 ℃) test method Low intensity 150-400 Appendix A A.5 The strength of 401 to 800 High-strength 801 ~ 1200 Ultra high strength > 1200

Appendix A

(Normative) Testing method A.1 General Provisions The methods used were of analytical grade reagents. A.2 Identification Test A.2.1 Reagents and materials A.2.1.1 Water. in line with GB/T 6682-2008 specified two of water. A.2.1.2 iodine solution. 0.01mol/L, 0.05mol/L. A.2.2 Analysis step A.2.2.1 sample taken 1g, add water 65mL, boiled 10min, stirring constantly, make up water with hot water, let cool to 32 ℃ ~ 39 ℃ condenses Resilient translucent gel-like substance, and then heated to 85 ℃ begins to melt. A.2.2.2 take appropriate strip specimen pieces, immersed in 0.01mol/L iodine solution for a few minutes, dyed brown, remove and soaking in the water After gradient purple. A.3 starch test 0.5g of the sample, add water 100mL, after boiling to dissolve and let cool, add 2 drops of 0.05mol/L iodine solution can not be blue color. A.4 Determination of insoluble matter A.4.1 Principle Agar solution by vacuum filtration sand core crucible, the residue is washed and dried to constant weight to represent the mass fraction. A.4.2 Instruments and Equipment A.4.2.1 vacuum pump. A.4.2.2 sand core crucible. filter plate aperture 30μm ~ 50μm. A.4.2.3 electric oven. 105 ℃ ± 2 ℃. A.4.3 Analysis step Weigh a sample of about 1.5g (weighing accuracy 0.001g) in 500mL beaker, add water to 200mL, covered with a watch glass, heated to boiling solvent Solution (Note stirred when heated). Serve hot with dried to constant weight (mass difference of no more than twice around 0.001g constant weight, for cooling operation Need to strictly maintain the unity of the cooling time) of the sand core crucible vacuum filtration, and washed thoroughly with hot water beaker and the sand core crucible, and then the sand Core crucible at 105 ℃ ± 2 ℃ in the electric oven drying to constant weight (mass difference of not more than twice before and 0.001g of constant weight). A.4.4 Calculation Results Water insolubles X1 values expressed in%, according to formula (A.1) Calculated. 1 × - = m mmX (A.1) Where. Water-insoluble content X1-- samples, in percent (%); Quality m1-- sample in grams (g); m2-- sand core crucible with water insoluble drying to constant weight in units of grams (g); m0-- sand core crucible mass in grams (g). Take the arithmetic mean of the parallel determination results of the measurement results, the absolute value of the difference between the results of two parallel determination of not greater than 0.10. A.5 Determination of gel strength A.5.1 Principle The gel sample into a certain concentration and volume, gel strength measured by gel-resistant quality weights in the 15s ~ 20s, roots According to temperature conversion coefficient of the samples to gel strength. A.5.2 Instruments and Equipment Gel strength tester. Measuring range 100g/cm2 ~ 2000g/cm2. A.5.3 1.5% agar (dry basis) gel sample preparation According to the water sample according to the formula (A.2), said calculated amount of the sample X, in units of grams (g). X - = 1 1.5 (A.2) Where. X - weighed mass of the sample in grams (g); D - sample moisture content, in percent (%). Weigh formula (A.2) to calculate the amount of the resulting sample, accurate to 0.001g, placed in 500mL conical flask, 100mL of water, soak 1h After a reflux means heating the solution was kept simmering until the sample is completely dissolved, remove the flask, and the solution was poured sharing Into two 100mL beaker was cooled until the gel is formed, covered with a watch glass at room temperature after 15h, to be tested. A.5.4 Analysis step Will A.5.3 prepared sample is placed in the center position of the sample holder on the gel strength tester, according to the instructions into the gel strength tester Line operation, move the handle to make the weight adding means in contact with the lower end of the rod gel surface, increase the intensity of the gel surface rupture (endpoint About 4mm above into the gel), gel strength values recorded at this time, at the same time, the temperature of the gel is measured. A.5.5 Calculation Results Gel strength of the sample (P), in grams per square centimeter (g/cm2), according to equation (A.3) Calculated. fGP × = (A.3) Where. P-- gel strength of the sample (1.5% solution, 20 ℃), in grams per square centimeter (g/cm2); G-- gel strength value measured in grams per square centimeter (g/cm2); f-- from Table B.1 Richard temperature correction coefficient.

Appendix B

(Normative) Relationship between gel strength and temperature correction Table B.1 gel strength and temperature correction Relations Temperature (℃) correction coefficient Temperature (℃) correction factor 0.74 0.76 0.79 0.81 0.84 0.86 0.89 0.91 0.94 0.97 1.00 twenty one twenty two twenty three twenty four 1.03 1.06 1.09 1.13 1.16 1.20 1.23 1.27 1.31 1.35 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 1975-2010_English be delivered?

Answer: Upon your order, we will start to translate GB 1975-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 1975-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB 1975-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB 1975-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 1975-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.