GB 19415-2013 English PDFUS$239.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 19415-2013: Minimum allowable values of energy efficiency and evaluating values of energy conservation for single-capped fluorescent lamps Status: Obsolete GB 19415: Historical versions
Basic dataStandard ID: GB 19415-2013 (GB19415-2013)Description (Translated English): Minimum allowable values of energy efficiency and evaluating values of energy conservation for single-capped fluorescent lamps Sector / Industry: National Standard Classification of Chinese Standard: F01 Classification of International Standard: 27.010 Word Count Estimation: 6,639 Older Standard (superseded by this standard): GB 19415-2003 Quoted Standard: GB 16843; GB/T 17262 Regulation (derived from): National Standards Bulletin No. 26 of 2013 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard provides a single-ended fluorescent limit, energy and test methods for evaluating values ??of energy efficiency. Boot device or external boot device using a single-capped fluorescent lamps in this standard applies to preheat cathode equipped GB 19415-2013: Minimum allowable values of energy efficiency and evaluating values of energy conservation for single-capped fluorescent lamps---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Minimum allowable values of energy efficiency and evaluating values of energy conservation for single-capped fluorescent lamps ICS 27.010 F01 National Standards of People's Republic of China Replacing GB 19415-2003 Single-capped fluorescent lamps energy efficiency of limited value and energy conservation evaluation values Issued on. 2013-12-18 2014-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordSection 4.2 of this standard are mandatory, the rest are recommended. This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB 19415-2003 "single-ended fluorescent lamps and energy-saving energy efficiency of limited value evaluation value", compared with GB 19415-2003, Lord To technical changes are as follows. --- Deleted the original reference standard GB/T 2828 and GB/T 2829, GB 16843 increased as a reference standard; --- Refined single-ended fluorescent lamp category, and in turn gives the limit value of energy efficiency and energy conservation evaluation values; --- 2000h Lumen maintenance increased from the original 80% to 82%; --- Remove the test method chromaticity coordinates of the original Chapter 5; --- Deleted the original Chapter 6 Inspection rules. This standard by the National Development and Reform Commission Resource Conservation and Environmental Protection, the Ministry of Industry and Information Technology Energy Saving and Comprehensive Utilization Department proposed. This standard by the National Standardization Technical Committee for Energy and Management (SAC/TC20) centralized. This standard drafting units. China National Institute of Standardization, Foshan Electrical and Lighting Co., NVC Lighting Technology Co., Ltd., Xiamen Door Topstar Lighting Co., Ltd. Zhejiang Chen Hui Lighting Co., Ltd., Zhejiang Sunshine Lighting & Electrical Group Co., Ltd., OSRAM (China) Lighting Co., Ltd., the National Electric Light Source Quality Supervision and Inspection Center (Shanghai), Zhejiang Lighting Appliance Co., Ltd. Po Shan. The main drafters of this standard. Xiayu Juan, Wei Bin, Zhang Tieli, Peng Yanyan, Qinbi Fang, Zhangjun Bin, Deng Xuemei, Guo Peng Xin, Chen Ying, Chen Haihong, Wei Zhen Di, Zhao Yuejin. This standard replaces the standards previously issued as follows. --- GB 19415-2003. Single-capped fluorescent lamps energy efficiency of limited value and energy conservation evaluation values1 ScopeThis standard specifies the limit value of single capped fluorescent lamps, energy conservation evaluation values and test methods for energy efficiency. This standard applies to the inner cathode equipped with a preheating starting device or using an external single-ended fluorescent lamp starter.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 16843 Safety requirements for single-capped fluorescent lamps GB/T 17262 Single-capped fluorescent lamps - Performance requirements3 Terms and DefinitionsGB/T 17262 and defined by the following terms and definitions apply to this document. 3.1 The initial single-ended fluorescent light effect initialluminousefficacyforsingle-cappedfluorescentlamps Test methods, single-ended fluorescent lamps and power measured initial luminous flux ratio according to the standard rules. 3.2 Single-capped fluorescent lamps energy efficiency limit minimumalowablevaluesofenergyefficiencyforsingle-cappedfluorescent lamps According to the standard test method for the minimum limit, the initial single-ended fluorescent light effects. 3.3 Single-ended fluorescent energy saving evaluation value evaluatingvaluesofenergyconservationforsingle-cappedfluorescentlamps Test methods, the initial single-ended fluorescent light efficiency of the energy requirements of the minimum limits prescribed by the standards. 4. Technical Requirements 4.1 Basic requirements This standard is applicable to single-ended fluorescent lamps, their safety should meet the requirements of GB 16843, the performance should be consistent with GB/T 17262 requirements. 4.2 energy efficiency limit Single-capped fluorescent lamps energy efficiency of limited value to comply with Table 1. Table 1 Single-capped fluorescent lamps energy efficiency of limited value and energy conservation evaluation values Lamp Type Nominal power/W The initial single-ended fluorescent light effect/(lm/W) Hue. RR, RZ tone. RL, RB, RN, RD Energy efficiency of limited value evaluating values of energy efficiency limit value of energy conservation evaluation values Double Tube 2462706575 2760646368 2863696773 3063696773 3667767081 4067797083 5567777082 8069757278 Four categories 2660646367 2752565459 Multi-Tube 2660646367 3255686075 4255676074 5759686275 6059656269 6259656269 7059686274 8259696275 8559666271 12059686275 Square Table 1 (continued) Lamp Type Nominal power/W The initial single-ended fluorescent light effect/(lm/W) Hue. RR, RZ tone. RL, RB, RN, RD Energy efficiency of limited value evaluating values of energy efficiency limit value of energy conservation evaluation values Square 2156616165 2457636267 2862696673 3662696673 3863696673 Annulus Φ29 (halogen powder) Φ29 (tri-phosphor) Φ16 2244--51-- 3248--57-- 4052--60-- 2255625964 3264706874 4064726876 2272747578 2772797584 3472817587 4069757480 4169817487 5563706675 6063756680 4.3 evaluating values of energy Single-ended fluorescent energy saving evaluation value should meet the requirements in Table 1. 4.4 Lumen maintenance Single-capped fluorescent lamps after ignition 2000h, lumen maintenance should not be less than 82%.5 Test methodsInitial luminous efficacy and lumen maintenance testing and calculated in accordance with GB/T 17262 requirements. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 19415-2013_English be delivered?Answer: Upon your order, we will start to translate GB 19415-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 19415-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB 19415-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB 19415-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 19415-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
