GB 1903.15-2016 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 1903.15-2016: Food additive -- Calcium acetate
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 1903.15-2016	139	Add to Cart	3 days	Food additive -- Calcium acetate	Valid

Similar standards

GB 1886.9   GB 1886.45   GB 1903.13   GB 1903.17   GB 1903.18   GB 1903.16   

Basic data

Standard ID: GB 1903.15-2016 (GB1903.15-2016)
Description (Translated English): Food additive -- Calcium acetate
Sector / Industry: National Standard
Classification of Chinese Standard: X42
Word Count Estimation: 7,786
Date of Issue: 2016-12-23
Date of Implementation: 2017-06-23
Older Standard (superseded by this standard): GB 15572-1995
Regulation (derived from): National Health and Family Planning Commission Notice No.17 of 2016
Issuing agency(ies): National Health and Family Planning Commission of the People's Republic of China, State Food and Drug Administration

GB 1903.15-2016: Food additive -- Calcium acetate

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Food additive - Calcium acetate National Standards of People's Republic of China GB 1903.25-2016 National Food Safety Standard Fortified Food Biotin D- Issued on. 2016-12-23 2017-06-23 implementation National Health and Family Planning Commission People's Republic of China China Food and Drug Administration released GB 1903.25-2016 National Food Safety Standard Fortified Food Biotin D-

1 Scope

This standard applies to bromide, benzene acid, sodium salt as raw materials, chemical synthesis prepared food fortifier D- biotin. 2 molecular formula, relative molecular mass and structural formula Formula 2.1 C10H16N2O3S 2.2 formula 2.3 relative molecular mass 244.31 (according to 2007 international relative atomic mass)

3 Technical requirements

3.1 Sensory requirements Sensory requirements shall comply with the requirements of Table 1. Table 1 Sensory requirements Project requires test methods Color white or nearly white Status crystalline powder or crystal Take the right amount of sample is placed in a clean, dry colorless glass beaker , Under natural light, observe its color and status 3.2 Physical and Chemical Indicators Physical and chemical indicators should be consistent with the provisions of Table 2. GB 1903.25-2016 Table 2. Physical and chemical indicators Item Index Test Method D- biotin content (dry basis), w /% 98.0 ~ 100.5 Appendix A A.3 Clarity through test A.4 in Appendix A Specific rotation αm (20 ℃, D)/[(°) · m2 · kg-1] 89 ~ 93 GB/T 613a Loss on drying, w /% ≤ 1.0 GB 5009.3 direct drying Residue on ignition, w /% ≤ 0.10 GB/T 9741 Lead (Pb)/(mg/kg) ≤ 2.0 GB 5009.75 or GB 5009.12 Arsenic (As)/(mg/kg) ≤ 1.0 GB 5009.76 a solvent 0.1mol/L sodium hydroxide solution, wherein the concentration of the effective component is 2%. GB 1903.25-2016

Appendix A

Testing method A.1 General Provisions Unless otherwise specified in this standard, the purity of the reagents used should be analytically pure, the standard titration solution, impurity measurement standard solution preparation And products, should be GB/T 601, GB/T 602, the provisions of the preparation of GB/T 603, the test water should be consistent with GB/T 6682 in the three water regulation set. Solution was used in the tests did not indicate what is formulated with solvent, it refers to an aqueous solution. A.2 Identification Test A.2.1 infrared absorption spectrum test Using potassium bromide smear method, infrared absorption spectrum, measured infrared spectra should D- biotin control profile according to GB/T 6040 Consistent (control profile see Appendix B). A.2.2 bromine water fade test Sample preparation saturated aqueous solution was added dropwise to the orange bromine, bromine water fade. Determination A.3 D- biotin content (dry basis) of A.3.1 Reagents and materials A.3.1.1 D- biotin standards. purity should be more than 99%. A.3.1.2 acetonitrile. chromatography. A.3.1.3 buffer solution. Weigh sodium perchlorate monohydrate 1g, dissolved into 500mL water, adding 1mL phosphoric acid, dilute to 1000mL. A.3.1.4 Thinner. aqueous acetonitrile = 14. A.3.2 Instruments and Equipment High performance liquid chromatograph. with UV detector (detection wavelength 200nm). A.3.3 reference chromatographic conditions A.3.3.1 Column. 15cm × 4.6mm (diameter), particle size 3μm, ODS column or other equivalent column. A.3.3.2 mobile phase. acetonitrile buffer = 8.5 91.5. A.3.3.3 flow rate. 1.2mL/min. A.3.3.4 Injection volume. 50μL. NOTE. The system suitability is the tailing factor is not more than 1.5, and repeatedly injecting the standard solution twice, resulting in response to the relative average area of less than 2.0% deviation. A.3.4 Analysis step A.3.4.1 Preparation of standard solutions Take appropriate standard solutions Standard D- Biotin dissolved in diluent, is configured to 0.1mg/mL, if necessary, ultrasonic treatment completely Dissolved. GB 1903.25-2016 A.3.4.2 Preparation of sample solution Take appropriate samples D- biotin (via 105 ℃, 4h dried) was dissolved in the diluent, the sample solution is configured to 0.1mg/mL, and if necessary Ultrasonic treatment completely dissolved. A.3.4.3 Determination In reference chromatographic conditions, respectively, the standard solution and the sample solution were measured, recorded peak area, according to the formula (A.1) calculates the sample The D- biotin content. A.3.5 Calculation Results D- biotin content (dry basis) of the mass fraction w1, according to equation (A.1) Calculated. w1 = rU rS × cS cU × 100% (A.1) Where. rU --- sample liquid chromatographic peak area obtained; rS --- chromatographic analysis of standard solution peak area obtained; cS --- standard solution D- biotin concentration, in milligrams per milliliter (mg/mL); The concentration of the sample solution cU --- D- biotin, in milligrams per milliliter (mg/mL). The results parallel arithmetic mean of the measurement results shall prevail. A.4 Determination of Clarity 1.0g sample taken in 0.5mol/L sodium hydroxide solution, to dissolve the volume to 10.0mL, then the solution should be colorless and transparent. GB 1903.25-2016

Appendix B

Standard infrared spectra D- biotin D- biotin standard infrared spectrum is shown in Figure B.1. Note. quoted in force since April 1, 2011, "Japanese Pharmacopoeia (JP16)" --- InfraredReferenceSpectra. Figure B.1 D- biotin standard infrared spectra ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 1903.15-2016_English be delivered?

Answer: Upon your order, we will start to translate GB 1903.15-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 1903.15-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB 1903.15-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.