GB 1886.7-2015 English PDF

US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 1886.7-2015: National Food Safety Standard -- Food Additives -- Sodium metabisulphite
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 1886.7-2015	169	Add to Cart	3 days	National Food Safety Standard -- Food Additives -- Sodium metabisulphite	Valid

Similar standards

GB 1886.45   GB 1886.228   GB 1886.9   GB 1886.3   GB 1886.1   GB 1886.4   

Basic data

Standard ID: GB 1886.7-2015 (GB1886.7-2015)
Description (Translated English): National Food Safety Standard -- Food Additives -- Sodium metabisulphite
Sector / Industry: National Standard
Classification of Chinese Standard: X42
Classification of International Standard: 67.220.20
Word Count Estimation: 8,880
Date of Issue: 2015-09-22
Date of Implementation: 2016-03-22
Older Standard (superseded by this standard): GB 1893-2008
Regulation (derived from): PRC National Health and Family Planning Commission 2015 No.8
Issuing agency(ies): National Health and Family Planning Commission of the People's Republic of China

GB 1886.7-2015: National Food Safety Standard -- Food Additives -- Sodium metabisulphite

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(National food safety standards for food additives sodium metabisulfite) National Standards of People's Republic of China National Food Safety Standard Food additive sodium metabisulfite Issued on. 2015-09-22 2016-03-22 implementation People's Republic of China National Health and Family Planning Commission released

Foreword

This standard replaces GB 1893-2008 "food additive sodium metabisulfite." This standard compared with GB 1893-2008, the main changes are as follows. --- Standard name was changed to "national food safety standards of food additive sodium metabisulfite." National Food Safety Standard Food additive sodium metabisulfite

1 Scope

This standard applies to food additive sodium metabisulfite.

2 molecular formula and relative molecular mass

Formula 2.1 Na2S2O5 2.2 relative molecular mass 190.12 (according to 2007 international relative atomic mass)

3 Technical requirements

3.1 Sensory requirements Sensory requirements shall comply with the requirements of Table 1. Table 1 Sensory requirements Project requires test methods White or slightly yellow color Status crystalline powder Take the right amount of sample is placed in a clean, dry white porcelain dish, Observe its color and status in natural light 3.2 Physical and Chemical Indicators Physical and chemical indicators should be consistent with the provisions of Table 2. Table 2. Physical and chemical indicators Item Index Test Method Sodium metabisulfite content (Na2S2O5 dollars), w /% ≥ 96.5 Appendix A A.4 Iron (Fe), w /% ≤ 0.003 A.5 in Appendix A Clarity through test A.6 in Appendix A Arsenic (As)/(mg/kg) ≤ 1.0 GB 5009.76 Heavy metals (Pb)/(mg/kg) ≤ 5.0 GB 5009.74

Appendix A

Testing method A.1 Safety Tips The standard test operations require the use of some strong acid should be used with caution to avoid splashing on the skin. When using a volatile acid is required Carried out in a fume hood. A.2 General Provisions This standard reagents and water in the absence of other specified requirements, refer to the three water analytical reagent and GB/T 6682 regulations. test The required standard solution, impurity standard solution, preparations and products, did not indicate when the other requirements according to GB/T 601, GB/T 602, GB/T 603 provisions of the preparation. Solution was used in the tests did not indicate what is formulated with solvent, it refers to an aqueous solution. A.3 Identification Test A.3.1 Reagents and materials A.3.1.1 hydrochloric acid. A.3.1.2 potassium iodide solution. 360g/L. A.3.1.3 hydrochloric acid solution. 13. A.3.1.4 iodine solution. take 1.4g iodine and potassium iodide solution was placed in 10mL, add two drops of hydrochloric acid, dissolved in water, dilute to 100mL, storage In brown bottle stored. A.3.1.5 mercurous nitrate solution. take 15g mercurous nitrate, add 90mL water, 10mL nitric acid solution (19) was dissolved, add a drop of mercury, to avoid Sealed light stand. A.3.1.6 platinum wire. A.3.2 Identification method A.3.2.1 This product was sulfite reaction effects After the sample solution was added iodine solution that is faded yellow. Aqueous hydrochloric acid solution was dropped after the sample has a sulfur dioxide gas to escape to Asia mercury nitrate solution infiltrating dipstick test, which was black. A.3.2.2 The reaction product is significant sodium effects Infiltration of platinum wire with hydrochloric acid to colorless in the first combustion colorless flame. Then dipped a little sample solution in a colorless flame combustion, the flame that It was bright yellow. A.4 Determination of sodium metabisulfite content (Na2S2O5 basis) A.4.1 Method summary In weakly acidic solution with iodine sulfite oxidized to sulfate. Starch as indicator drops solution with sodium thiosulfate standard titration Given an excess of iodine. A.4.2 Reagents and materials A.4.2.1 standard iodine titration solution. c 12I2 ÷ = 0.1mol/L. A.4.2.2 glacial acetic acid. 13. A.4.2.3 sodium thiosulfate standard titration solution. c (Na2S2O3) = 0.1mol/L. A.4.2.4 soluble starch solution. 5g/L. A.4.3 Analysis step Pipette 50mL standard iodine titration solution and placed iodine bottle. Weigh about 0.2g sample, accurate to 0.0002g, was added to a solution of iodine The stopper, seal, placed 5min in the dark. Join 5mL glacial acetic acid, sodium thiosulfate standard titration solution titration, near the end , Adding 2mL soluble starch solution and continue titration to the disappearance of the blue solution as the end point. Meanwhile Pipette 50mL iodine standard solution titration, a blank test in the same conditions. A.4.4 Calculation Results Sodium metabisulfite content (Na2S2O5 meter) mass fraction w1, according to equation (A.1) Calculated. w1 = c × (V0-V1) × M m × 1000 × 100% (A.1) Where. C --- concentration of sodium thiosulfate standard titration solution, expressed in moles per liter (mol/L); Volume V0 --- sodium thiosulfate standard titration of the blank test solution consumed in milliliters (mL); Volume of sodium thiosulfate standard titration V1 --- titration solution consumed solution in milliliters (mL); M --- sodium metabisulfite molar mass in grams per mole (g/mol), M 4Na2S2O5 ÷ = 47.52é êê úú; M --- the quality of the sample, in grams (g); 1000 --- conversion factor. The results parallel arithmetic mean of the measurement results shall prevail. In two independent determination results obtained under repeatability conditions absolute difference Not more than 0.2%. A.5 Determination of iron (Fe) of A.5.1 Method summary With GB/T 3049-2006 Chapter 3. A.5.2 Reagents and solutions With GB/T 3049-2006 Chapter 4. A.5.3 Equipment With GB/T 3049-2006 Chapter 5. A.5.4 Analysis step Draw A.5.4.1 work curve. According to GB/T 3049-2006 the provisions of the use of the optical path 1cm cuvette and the corresponding amount of iron standard solution, drawn work curve. A.5.4.2 Preparation of test solution Weigh about 5g sample to the nearest 0.01g. 250mL beaker and placed on a high type, with a small amount of water dissolved, 25mL of hydrochloric acid solution, Boiling water bath evaporated to dryness. The residue was dissolved in water, all transferred to 250mL volumetric flask, dilute with water to the mark. A.5.4.3 Preparation of the blank test solution High type in 250mL beaker, add a small amount of water, plus 25mL of hydrochloric acid in a boiling water bath to dryness, the residue was dissolved in water, all moved 250mL volumetric flask, dilute to the mark, shake. A.5.4.4 Determination With pipette 50 mL of test solution and the blank test solution were placed in 100 mL volumetric flask, according to the following The provisions of GB/T 3049-2006, from the "if necessary, add water to 60mL" to get started. A.5.5 Calculation Results Iron (Fe) mass fraction w2, according to equation (A.2) Calculated. w2 = m2-m3 m1 × 250 × 1000 × 100% (A.2) Where. m2 --- Richard from the working curve of the test solution of iron mass, in milligrams (mg); m3 --- Richard from the working curve of the blank test solution of iron in mass, in milligrams (mg); M1 --- the quality of the sample, in grams (g); Pipette 50 --- volume of the test solution, in milliliters (mL of); The total volume of the test solution --- 250 milliliters (mL of); 1000 --- conversion factor. The results parallel arithmetic mean of the measurement results shall prevail. In two independent determination results obtained under repeatability conditions absolute difference Not more than 0.0005%. A.6 Determination of Clarity A.6.1 Reagents and materials A.6.1.1 hydrochloric acid standard solution. c (HCl) = 0.1mol/L. A.6.1.2 nitric acid solution. 13. A.6.1.3 silver nitrate solution. 20g/L. A.6.1.4 soluble starch solution. 20g/L. A.6.1.5 measured turbidity standard stock solution. 1mL solution of chlorine (Cl) 1mg. Pipette 14.1mL standard solution of hydrochloric acid, a 50mL volumetric flask, dilute to the mark. A.6.1.6 measured turbidity standard solution. 1mL solution of chlorine (Cl) 0.01mg. Pipette 1mL measured turbidity standard stock solution, placed in 100mL volumetric flask, dilute to the mark. A.6.2 Analysis step Weigh 0.50g ± 0.001g sample placed in 25mL colorimetric tube, add water to dissolve 10mL. Turbidity test solution should be lower than the standard ratio Turbid solution. Turbidity standard solution. Pipette 1.2mL measured turbidity standard solution, placed in 25mL colorimetric tube, add water to 20mL, add 1mL nitrate Acid solution, 0.2mL soluble starch solution, 1mL silver nitrate solution, shake, place 15min. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 1886.7-2015_English be delivered?

Answer: Upon your order, we will start to translate GB 1886.7-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 1886.7-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB 1886.7-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.