GB 1886.111-2015 English PDF

US$109.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 1886.111-2015: National Food Safety Standard -- Food Additives -- Beet red
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 1886.111-2015	109	Add to Cart	2 days	National Food Safety Standard -- Food Additives -- Beet red	Valid

Similar standards

GB 1886.300   GB 1886.210   GB 1886.40   GB 1886.104   GB 1886.105   GB 1886.102   

Basic data

Standard ID: GB 1886.111-2015 (GB1886.111-2015)
Description (Translated English): National Food Safety Standard -- Food Additives -- Beet red
Sector / Industry: National Standard
Classification of Chinese Standard: X40
Word Count Estimation: 5,531
Date of Issue: 2015-09-22
Date of Implementation: 2016-03-22
Regulation (derived from): PRC National Health and Family Planning Commission 2015 No.8
Issuing agency(ies): National Health and Family Planning Commission of the People's Republic of China

GB 1886.111-2015: National Food Safety Standard -- Food Additives -- Beet red

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(National food safety standards for food additives beet red) National Standards of People's Republic of China National Food Safety Standard Food additive beet red Issued on. 2015-09-22 2016-03-22 implementation People's Republic of China National Health and Family Planning Commission released National Food Safety Standard Food additive beet red

1 Scope

This standard applies to extraction from red beet (seaweed head) water extract, concentrated, spray-drying the resulting sweet food additives Red dish.

2 molecular formula and relative molecular mass

Formula 2.1 C24H26N2O13 2.2 relative molecular mass 550.48 (according to 2007 international relative atomic mass)

3 Technical requirements

3.1 Sensory requirements Sensory requirements shall comply with the requirements of Table 1. Table 1 Sensory requirements Project requires test methods Color purple State liquid, powder or granular solid Take the right amount of sample is placed in a clean, dry 50mL beaker In, in natural light, color and visual observation status 3.2 Physical and Chemical Indicators Physical and chemical indicators should be consistent with the provisions of Table 2. Table 2. Physical and chemical indicators Project requires test methods The absorbance (E1 m, 535nm) > 3.0 Appendix A A.3 pH 4.0 ~ 6.0 in Appendix A A.4 Residue on ignition, w /% ≤ 14.0 Appendix A A.5 Total arsenic (As)/(mg/kg) ≤ 2.0 GB 5009.11 Lead (Pb)/(mg/kg) ≤ 5.0 GB 5009.12 Note. The commercialization of beet red products shall comply with the standard red beet as raw material, add edible dextrin, antioxidants and other accessories made of.

Appendix A

Testing method A.1 General Provisions This standard reagents and water, did not indicate when the other requirements, refer to analytical reagent and third grade water GB/T 6682 regulations. Standard solutions used in the tests, impurity standard solution, preparations and products, did not indicate when the other requirements, according to GB/T 601, GB/T 602 And the provisions of GB/T 603 formulation. Solution was used in the tests did not indicate what is formulated with solvent, it refers to an aqueous solution. A.2 Identification Test A.2.1 solubility Dissolved in water, soluble in ethanol. Transparent solution without precipitation. A.2.2 color reaction 1mL10% sodium hydroxide solution was added to an aqueous solution of 5mL beet red, or purple color from red to yellow. A.2.3 absorption maxima Take 0.1g sample, plus pH5.4 acetic acid - sodium acetate buffer volume to 100mL, this was in the vicinity of 535nm absorption peak. A.2.4 TLC Silica gel G plate, propanol. acetic acid. water = 6.2.2 (volume ratio) as solvent, betanin gives a single red tailing spot. A.3 absorbance (E1 m, 535nm) measured A.3.1 Reagents and materials A.3.1.1 acetic acid solution. 0.1mol/L. A.3.1.2 sodium acetate solution. 0.1mol/L. A.3.1.3 pH5.4 acetic acid - sodium acetate solution. Take 14mL acetic acid solution was mixed with sodium acetate solution 86mL, adjusted to pH 5.4. A.3.2 Instruments and Equipment A.3.2.1 1cm glass cuvette. A.3.2.2 Spectrophotometer. A.3.3 Analysis step A sample was weighed 0.1g (accurate to 0.0002g), pH5.4 with acetic acid - sodium acetate buffer volume to 100mL, with buffer solution as reference, Cuvette, the absorbance of the sample solution was measured at 535nm with a spectrophotometer at 1cm. Absorbance should be between 0.3 and 0.7, if you do not Within this range, we need to be adjusted according to the color value of the dilution factor. A.3.4 formula Absorbance E1 m, according to equation (A.1) Calculated. E1 m = c × L (A.1) Where. A --- absorbance; c --- beet red solution concentration,%; L --- than the thickness of the cuvette solution centimeters (cm). The results parallel arithmetic mean of the measurement results shall prevail. A.4 pH measurement A sample with distilled water to form 1% solution, then the pH meter. A.5 Determination of residue on ignition A.5.1 Reagents and materials sulfuric acid. A.5.2 measuring step Weigh the sample 1g (accurate to 0.01g) has been set constant weight of the crucible, burning, charring, after cooling carefully added sulfuric acid 0.5mL ~ 1mL, making it moist, burning to dryness and then transferred to a high-temperature furnace burning at 800 ℃ completely gray and constant weight. A.5.3 Calculation Results Burning residue mass fraction w2, according to equation (A.2) calculations. w2 = m1 m2 × 100% (A.2) Where. Mass m1 --- ash in grams (g); m2 --- sample mass, in grams (g). The results parallel arithmetic mean of the measurement results shall prevail. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 1886.111-2015_English be delivered?

Answer: Upon your order, we will start to translate GB 1886.111-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 1886.111-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB 1886.111-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.