GB 18447.2-2008 English PDFUS$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 18447.2-2008: Safety requirements for tractors -- Part 2: Walking tractors Status: Valid GB 18447.2: Historical versions
Basic dataStandard ID: GB 18447.2-2008 (GB18447.2-2008)Description (Translated English): Safety requirements for tractors -- Part 2: Walking tractors Sector / Industry: National Standard Classification of Chinese Standard: T61 Classification of International Standard: 65.060.10 Word Count Estimation: 7,732 Date of Issue: 2008-12-31 Date of Implementation: 2009-10-01 Older Standard (superseded by this standard): GB 18447.2-2001 Quoted Standard: GB/T 3871.13; GB/T 4269.1; GB/T 4269.2; GB/T 6229; GB 6376; ??GB/T 9480; GB 10395.1-2001; GB 10396; GB/T 15706.1-2007 Regulation (derived from): Announcement of Newly Approved National Standards No. 26 of 2008 (total 139) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Chinese standard applies to the physical properties and intended to restrict the use of right tractor, the required safety requirements apply to GB/T 15706. 1-2007 specified in 3. 6 intended use of the machine during the ever-present danger. GB 18447 this standard applies to tractor (hereinafter referred to as tractors). GB 18447.2-2008: Safety requirements for tractors -- Part 2: Walking tractors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Safety requirements for tractors.Part 2. Walking tractors ICS 65.060.10 T61 National Standards of People's Republic of China Replacing GB 18447.2-2001 Tractor Safety Requirements Part 2. tractor Posted 2008-12-31 2009-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordAll technical content of this document is mandatory, and as a basis for safety inspection. GB 18447 "Tractor Safety Requirements" is divided into four parts. --- Part 1. wheeled tractors; --- Part 2. tractor; --- Part 3. Crawler tractors; --- Part 4. Belt-drive wheeled tractors. This section GB Part of 218,447. This part is GB 18447.2-2001 "tractor safety requirements" amendment, compared with GB 18447.2-2001 main Changes are as follows. --- Presentation of a standard name was changed to make it more in line with GB/T 1.1 Principles prepared by the standard; --- Increased flywheel (including flywheel pulley) requirements should guard; --- Change the exhaust smoke measurement values and tractors; --- Increased the fuel tank structure of claim; --- Added tractor headlight luminous intensity requirements; --- Detailed the use of manual safety precautions requirements. Since October 1, 2009, the company's products should be the implementation of this standard; since January 1, 2010, shall cease on the market Sales do not meet this standard. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee under the jurisdiction of the tractor. This section is responsible for drafting units. Luoyang Tractor Research Institute. Participated in the drafting of this section. Changzhou Dongfeng Agricultural Machinery Group Co., Ltd., Shandong Changlin Machinery Group Co., Ltd. The main drafters of this section. Lijing Zhong, Wang Chang Mao, Zhu hole expensive, Lang blog, still Rope. This part of the standard replaces the previous editions are. --- GB 18447.2-2001.IntroductionGB 18447 in this section relate to the safety of walking tractor. GB 18447 in this section relate to the risks associated with GB/T 15706.1-2007 agreement. Tractor Safety Requirements Part 2. tractor1 ScopeGB 18447 in this section is from the physical properties and intended use in terms of walking tractor to restrict the security requirements established under applicable In GB/T machine in a predetermined period of use there is always risk provisions 3.6 15706.1-2007. GB 18447 in this section applies to the tractor (hereinafter referred to as tractors).2 Normative referencesThe following documents contain provisions which, through reference in this section GB 18447, constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 3871.13 Agricultural tractors - Test procedures - Part 13. Measurement of exhaust smoke (GB/T 3871.13-2006, ISO 789-4. 1986, MOD) GB/T 4269.1 agricultural and forestry tractors and machinery, lawn and garden equipment operator controls and other displays character No. 1. Common symbols (GB/T 4269.1-2000, idt ISO 3767-1.1991) GB/T 4269.2 agricultural and forestry tractors and machinery, lawn and garden equipment operator controls and other displays character No. Part 2. Symbols for agricultural tractors and machinery (GB/T 4269.2-2000, idt ISO 3767-2.1991) GB/T 6229 Test Method for tractor GB 6376 tractor noise limits GB/T 9480 Tractors and machinery for agriculture and forestry, powered lawn and garden equipment - Operator 's manuals (GB/T 9480- 2001, eqv ISO 3600.1996) GB 10395.1-2001 Tractors and machinery for agriculture and forestry - Safety requirements - Part 1. General (eqv ISO 4254-1. 1989) GB 10396 agricultural and forestry tractors and machinery, lawn and garden equipment - Safety signs and hazard pictorials - General principles (GB 10396- 2006, ISO 11684.1995, MOD) GB/T 15706.1-2007 Safety of machinery - Basic concepts, general principles for design - Part 1. Basic terminology, methodology (ISO 12100-1. 2003, IDT)3 Danger ListDanger may arise walking tractor, operations and maintenance process are shown in Table 1. Table 1 Danger List No. No. dangerous hazard 1 no exposed rotating member 5 guard too much noise 2 6 mechanical malfunction brake failure 3 exhaust smoke through the large 7 insufficient lighting signal 4 in contact with the heat source 8 Risk of burns caused by misuse 4 Safety requirements and/or measures and determination 4.1 Security When the operator according to product instructions for operation and maintenance, the operator endanger the health and safety at risk or potential danger should Protective and/or safety warning signs. The following exposed rotating parts should be protective, shields should be fixed firmly, pressure, no sharp corners and sharp edges. Its strength should be consistent with GB 10395.1- 2001 provisions. Specific requirements are as follows. a) Start claw should be protective edge, the shaft can not protect protruding outside edge. b) flywheel pulley should be protective equipment (including flywheel pulley). c) pulleys, belt guards at least to the point bite into the bag, guards from the edge of the occlusal distance not less than 120mm. d) arranged in the exhaust pipe outlet position and direction should the driver or other operators to minimize exposure to harmful gases and fumes. Muffler and exhaust elbow insulated protective equipment shall be provided through the protective device can be a safe distance and shall comply with GB 10395.1- 2001 7.1.5 regulations. e) the nominal capacity of the fuel tank 85 per cent of injecting water, installed fuel tank cap, flip down the fuel tank filler neck so that the leakage quantity of the fuel tank cap Should not exceed 30g/min. 4.2 Maximum tractor exhaust smoke opacity value of not more than 3.2m-1, measured in accordance with the provisions of GB/T 3871.13 of. 4.3 tractor driver operating environment and position of noise limits should be consistent with the provisions of GB 6376, according to GB/T 6229 regulations detected. 4.4 braking performance 20% of the tractor on hard, dry ramp, use the parking brake device, it should be along on the downhill reliable stop, press GB/T 6229 The provisions of testing. 4.5 lighting, signaling devices Tractors should have a headlamp, the luminous intensity shall be not less than 6000cd. 4.6 safe operation When the steering direction of the device is not obvious manipulating should be on or near the operating device indicated by symbol manipulation, manipulation of symbols should be consistent GB/T 4269.1 and GB/T 4269.2 requirements.5 Use Information5.1 tractors on visible parts of the outer surface of the front of the car should be installed trademark or a factory standard can be permanently maintained. 5.2 means the tractor should be able to permanently maintain the product label, signs indicating the contents should include at least. --- Name Model tractor; --- Engine rated power (12 hours); --- Serial number and date; --- Name and address of the manufacturer; --- Product standard number. 5.3 At least the following dangerous parts, safety signs should be set. Safety signs shall comply with the provisions of GB 10396. a) in their stalls at prohibiting coasting downhill in neutral safety signs; b) a prominent place in the body plus parking, parking brake safety signs and stand-alone operation speed, downhill steering operation instructions, safety warning Flag; c) evaporative diesel nozzle plus safety warning signs; d) fuel filler fire signs. 5.4 Users should be provided to facilitate the user to read the instruction manual and maintenance manual, safety precautions should be consistent with GB/T 9480 regulations Set, which shall include at least. a) avoid the risk of safe handling; b) the emergency measures to be taken; c) disabled requirements; d) description of safety signs. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 18447.2-2008_English be delivered?Answer: Upon your order, we will start to translate GB 18447.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 18447.2-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB 18447.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB 18447.2-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 18447.2-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
