GB 17498.4-2008 English PDFUS$134.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 17498.4-2008: Stationary training equipment -- Part 4: Strength training benches -- Additional specific safety requirements and test methods Status: Valid
Basic dataStandard ID: GB 17498.4-2008 (GB17498.4-2008)Description (Translated English): Stationary training equipment -- Part 4: Strength training benches -- Additional specific safety requirements and test methods Sector / Industry: National Standard Classification of Chinese Standard: Y55 Classification of International Standard: 97.220.30 Word Count Estimation: 7,748 Date of Issue: 2008-12-30 Date of Implementation: 2010-04-01 Quoted Standard: GB 17498.1-2008; GB 17498.2-2008 Adopted Standard: ISO 20957-4-2005, IDT Regulation (derived from): Announcement of Newly Approved National Standards No. 27 of 2008 (total 140) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Chinese standard relates to general safety requirements, specifically for Strength training benches and used for the training of self-standing barbell bracket, additional specific safety requirements of this standard shall be used in conjunction with GB 17498. 1. This standard applies to stationary fitness equipment in the S-Class and Class H Benches (hereinafter referred to as the bench). GB 17498.4-2008: Stationary training equipment -- Part 4: Strength training benches -- Additional specific safety requirements and test methods---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Stationary training equipment.Part 4. Strength training benches.Additional specific safety requirements and test methods ICS 97.220.30 Y55 National Standards of People's Republic of China GB 17498.4-2008/ISO 20957-4.2005 Stationary training equipment Part 4. Strength training benches Additional specific safety requirements and test methods (ISO 20957-4.2005, IDT) Posted 2008-12-30 2010-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordSection 5 of this chapter, Chapter 7 are mandatory; the rest are recommended. GB 17498 "Stationary training equipment" consists of the following nine sections. --- Part 1. General safety requirements and test methods; Strength training equipment, additional specific safety requirements and test methods;. --- Part 2 Strength training benches, additional specific safety requirements and test methods;. Part 4 of --- --- Part 5. Particular safety requirements and test methods Pedal crank training equipment, additional; --- Part 6. specific safety requirements and test methods for treadmills added; --- Part 7. specific safety requirements and test methods for rowing attached; --- Part 8. Particular safety requirements and test methods for stepping machine, step machine and additional climber; --- Part 9. elliptical trainers, additional specific safety requirements and test methods; --- Part 10. with a fixed wheel or without flywheel exercise bike, additional specific safety requirements and test methods. This is part of the GB Part 417 498. The standard at the time of division of its parts, in order to maintain consistency with the original international standards, will be Part 2 and Part 3 to be a merge. This part identical with ISO 20957-4.2005 "Stationary training equipment - Part 4. Strength training benches, additional specific safety Wide requirements and test methods. " For ease of use, this section made the following editorial changes. --- In order to maintain our existing fitness equipment harmonization of national standards and in accordance with the actual use of such products in the field at home and abroad The product and our customary name, appropriately modified "guide elements" standard name; that is, directly translated Thesaurus "stationary training equipment" (stationarytrainingequipment) in order to modify the "Stationary training equipment"; --- Remove the cover of the international standard, PDF denied responsibility statement (PDFdisclaimer), Preface and Table of Contents; --- Use the decimal symbol instead of decimal symbol ",". ","; --- With "GB 17498 of the present part" or "this part" instead of "this part of ISO 20957." This part is proposed by the China National Light Industry Council. This part of the National Center for Standardization centralized stationery. This section drafted by. National Sporting Goods Quality Supervision and Inspection Center, Shanxi O Reiter Health Industry Co., Ltd., Qingdao Sino-British faction Adams (Group) Co., Ltd., Shandong Relax Health Industry Co., Ltd., Fujian Shu Hua Sporting Goods Co., Ltd., Ningbo Michelis sports equipment Limited. The main drafters of this section. Yan-Ling Wang, sinus military community, Yuan Yilong, Yang Guosheng, Chen Kun Zhang, Lu Guoqiang, Zhu, one, Sunqing Min, Xiong Wei. GB 17498.4-2008/ISO 20957-4.2005 Stationary training equipment Part 4. Strength training benches Additional specific safety requirements and test methods1 ScopeWhen GB 17498 of the provisions of this part of GB 17498.1 In addition to general safety requirements, specifically for Strength training benches and use Standing barbell for training, additional specific safety requirements for the stent, the use of this section should be combined with the GB 17498.1. This section applies to stationary fitness equipment in the S-Class and H-Class benches (hereinafter referred to as the bench).2 Normative referencesThe following documents contain provisions which, through reference in this Part of GB 17498, constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB 17498.1-2008 Stationary training equipment - Part 1. General safety requirements and test methods (ISO 20957-1.2005, IDT) GB 17498.2-2008 Stationary training equipment - Part 2. Strength training equipment, additional specific safety requirements and test The method (ISO 20957-2.2005, IDT)3 Terms and DefinitionsTerms and definitions established in GB 17498.1 GB 17498 apply to this section. Category 4 Shall comply with the requirements of Chapter 4 GB of 17498.1-2008.5 Safety requirements5.1 General Design training equipment components shall meet the following requirements. 5.2 barbell bench with fixed bracket Rotational stability 5.2.1 barbell It should be prevented by the unbalanced load caused by the process of the barbell tipping fulcrum distance or safety devices. 6.2 Test Press. 5.2.2 rotational stability with fixed bench barbell holder of When an unbalanced load is applied perpendicular to the longitudinal axis, with a fixed bench barbell bracket should be stable. 6.3 Test Press. 5.2.3 Longitudinal Stability Bench with fixed bracket in the longitudinal direction should be stable. 6.4 Test Press. 5.3 and standing barbell bench connecting bracket Standing barbell bench bracket and should be used in combination with a device connected to the ground. GB 17498.4-2008/ISO 20957-4.2005 6.1.2 Test Press. Size 5.4 barbell bracket Vertical lowest when measured diameter of 30mm barbell bar, the front end of the frame (sleeve or fork) to a stationary high barbell Rao degree should be from 20mm to 40mm, the rear portion of at least 80mm higher than the front portion of the top (see Figure 1). 6.1.1 Test Press. Millimeters Rao 20mm ~ 40mm.1 barbell bracket size chart5.5 barbell bracket strength Rear barbell bracket should be able to withstand normal use without load performance failure and damage. 6.5 Test Press. 5.6 load Class H and Class S benches load shall comply with the requirements of 5.2 in GB 17498.2-2008. 5.7 barbell bracket For any part of the free barbell support, users should be easy to pick up and put back the barbell. 6.1.4 Test Press.6 Test methods6.1 General 6.1.1 Dimensional Inspection. 6.1.2 visual inspection. 6.1.3 tactile inspection. 6.1.4 Operation test. 6.2 barbell rotational stability test The solid steel rod (length 1600mm, diameter less than 30mm) symmetrically placed on the barbell bracket. In the side bar put a barbell (H class 10kg, S class 20kg), the center of the end surface barbell pitch rod is 200mm, see Figure 2. GB 17498.4-2008/ISO 20957-4.2005 Millimeters Stability testing unbalanced load Fig. 2 Tilt stability test bench with a fixed 6.3 barbell holder of After fixation barbell, according to test 6.2. 6.4 longitudinal stability test The bench is placed on the 10 ° bevel placed barbell maximum load specified by the manufacturer at the highest point of the bracket, but should be at least 50kg (see Figure 3). FIG. 3 longitudinal stability test 6.5 barbell bracket strength test Using a pendulum impact from the rear top bracket (40 ± 10) mm at this test procedure was repeated 10 times (see Figure 4). Millimeters a) --- pendulum test weight with maximum load specified by the manufacturer is consistent, but not less than H class 40kg, S class should not be less than 50kg; b) --- variable length; c) --- 100kg load evenly distributed over the entire surface of the bench; 1 --- ground. Figure 4 barbell bracket load test GB 17498.4-2008/ISO 20957-4.2005 Book GB 17498.4-2008/ISO 20957-4.2005 6.6 Test Report The test report shall include at least the following. a) the name and address of the laboratory, and laboratory test site if the address is not the same, should clarify the place of trial; b) each page of the report and the report should have a unique identifier (for example. number) and the total number of pages; c) the name and address of the principal; Description and determination d) pilot projects; e) date of receipt of the pilot project and the completion date of the test; f) identification of the test specification or description of the test procedure or method; g) description of the relevant sampling procedures; Any deviation h) and test specifications are inconsistent, additional or excluded, as well as any other relevant specialized tests; i) Form when applicable, graphs, thumbnails and captions measurement, test results obtained and any failure is determined; j) Measurement uncertainty regarding the description (associated office); k) test report technical director's signature and title or other equivalent identification and the date of issuance; l) a statement that the test results apply only to the test project.7 Additional Operating InstructionsIn addition to GB 17498.1-2008 instructions for use, the manufacturer shall provide standing barbell bracket instructions for safe use. 5002. 4- OSI/8002- 4. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 17498.4-2008_English be delivered?Answer: Upon your order, we will start to translate GB 17498.4-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 17498.4-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB 17498.4-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
