Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB 17411-2015 English PDF

US$659.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 17411-2015: [Including 2018XG1] Marine fuel oils
Status: Valid

GB 17411: Historical versions

Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
GB 17411-2015659 Add to Cart 6 days [Including 2018XG1] Marine fuel oils Valid
GB/T 17411-2012RFQ ASK 9 days Marine Fuels oils Obsolete
GB/T 17411-1998RFQ ASK 9 days Petroleum products--Fuels (class F)--Specifications of marine fuels Obsolete

Similar standards

GB 17930   GB 18350   GB/T 17477   GB 18351   GB/T 22030   

Basic data

Standard ID: GB 17411-2015 (GB17411-2015)
Description (Translated English): [Including 2018XG1] Marine fuel oils
Sector / Industry: National Standard
Classification of Chinese Standard: E31
Classification of International Standard: 75.160.20
Word Count Estimation: 31,355
Date of Issue: 2015-12-31
Date of Implementation: 2016-07-01
Older Standard (superseded by this standard): GB/T 17411-2012
Regulation (derived from): State Standard Announcement 2015 No.43
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB 17411-2015: [Including 2018XG1] Marine fuel oils

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Marine fuel oils ICS 75.160.20 E31 National Standards of People's Republic of China Replacing GB/T 17411-2012 Marine fuel oil [ISO 8217.2012, MOD] Issued on. 2015-12-31 2016-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 Classification and designation 3 2 4 3 requirements and test methods 5 Inspection Rules 3 6 packaging, labeling, transportation and storage 4 7 Safety 4 Appendix A (informative) biological products and fatty acid methyl esters (FAMEs) 8 Annex B (informative) hazardous substances 10 Annex C (informative) a sulfur content of 11 Annex D (informative) Hydrogen sulfide 12 Appendix E (normative) specific energy (calorific value) 13 Annex F (normative) ship fuel ignition residue of 15 Annex G (informative) Flash point 18 Appendix H (informative) Acid 19 Annex I (informative) sodium and vanadium 20 Appendix J (informative) catalyst powder 22 Annex K (informative) used lubricating oils 23 Annex L (informative) residual fuel oil cleanliness and compatibility 24 Annex M (informative) This standard and ISO 8217.2012 reg number control and technical differences and their causes 25 References 27

Foreword

The standard Chapter 3, Section 4, Chapter 6 and Chapter 7 are mandatory, the rest are recommended. This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 17411-2012 "marine fuel oil." This standard and GB/T 17411-2012 compared to major technological changes as follows. --- Standard recommended by the Switch mandatory; --- Chapter 1 applies a predetermined range of the sea [ocean] marine diesel engine and boiler fuel; --- According to the sulfur content of distillate fuel is divided into three grades, and an increase in the sulfur content of the relevant detection method (see Chapters 3 and Table 1); --- Distillate fuel flash point by the DMZ is not lower than 43 ℃ modifications not lower than 60 ℃ (see Table 1); --- Distillate fuels DMA and DMZ sulfur content of not more than 1.5% from the index revised to 1.0% (see Table 1); --- RMA10 RMB30 and residual fuel oil in accordance with the number of divided sulfur content of not more than 3.5%, 0.5% and 0.1% three grades, other grades according to the sulfur content of not more than 3.5% into, two levels of 0.5% (see Table 2 ); --- Increasing the net calorific value indicators and the corresponding detection methods (see Table 2); --- Increased cleanliness and compatibility with residual fuel oil informative annex (see Annex L). This revised standard adopts ISO 8217.2012 "Petroleum products - Fuels (F Class) marine fuel oil specifications. This standard and ISO 8217.2012 as compared to, in technical content and structure adjustment, Appendix M shows the structure and corresponding technical differences and their causes. This standard by the National Standardization Technical Committee on products and lubricant oil (SAC/TC280) proposed. This standard by the National Petroleum Products and Lubricants Standardization Technical Committee of petroleum fuels and lubricants Technical Committee (SAC/TC280/SC1) centralized. This standard was drafted. China Research Institute of Petroleum Corp. Petrochemical, China Sinopec Fuel Oil Sales Co., Ltd., China Sinotrans Group Co., China's ship fuel limited liability company, Technical and Economic Research Institute of China Shipbuilding Industry. Drafters of this standard. dragon Li, Xiang Xiaomin, when Xin Wei, Hu Wei, Song Yanyuan. This standard replaces the standards previously issued as follows. --- GB/T 17411-1998, GB/T 17411-2012. Marine fuel oil Warning. If you do not observe proper precautions, this product may be hazardous to your standard in the production, storage and use of the process. This standard is not intended to present all of the safety issues related to the product recommendations. Before using this standard has the responsibility to establish appropriate safety Full and preventive measures, and determine the applicability of regulatory limitations related.

1 Scope

This standard specifies made from petroleum and marine fuel oil classification code, requirements and test methods, inspection rules, packaging, labeling, transportation Transport, storage and security. This standard applies to the sea [ocean] marine diesel and fuel oil boiler. Fuel complying with this standard also applies to the same or a similar system Stationary diesel engines and other vessels made machinery. This standard specifies four distillate fuel oil for ships and 6 residual fuel oil. Wherein the distillate fuel for diesel emergency DMX When in use. Note 1. The purpose of this standard, "oil" is a term including tar sands and oil shale oil. NOTE 2. Marine Gas Turbine Fuel technical requirements are specified in GB/T 29114 [1] in. Note 3. The standard "sea [ocean] ship" means GB/T 7727.1-2008 [2] in 3.1. suitable for sailing boats in the ocean area.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 190 packaging and marking of dangerous goods GB/T 260 Petroleum products - Determination of water content GB/T 261 Flash Point by Pensky - Martens closed cup method (GB/T 261-2008, ISO 2719.2002, MOD) GB/T 265 Petroleum products - Determination of kinematic viscosity and dynamic viscosity calculation GB/T 384 Petroleum products - Determination of calorific value GB/T 387 Black petroleum products - Determination of sulfur content (tube furnace method) GB/T 508 Petroleum products - Determination of ash (GB/T 508-1985, eqvISO 6245. 1982) GB/T 1884 crude oil and liquid petroleum products - Laboratory determination of density (density meter method) (GB/T 1884-2000, eqv ISO 3675.1998) GB/T 1885 Petroleum Measurement Tables (GB/T 1885-1998, eqvISO 91-2.1991) GB/T 3535 Petroleum products - Determination of pour point (GB/T 3535-2006, ISO 3016-1994, MOD) GB/T 4756 petroleum liquids hand sampling method (GB/T 4756-1998, eqvISO 3170. 1988) GB/T 6986 Petroleum Determination of cloud point GB/T 7304 Petroleum products - Determination of acid number potentiometric titration GB/T 11137 Black petroleum products - Determination of kinematic viscosity (reverse - flow method) and calculation of dynamic viscosity GB/T 11140 Petroleum products - Determination of sulfur content wavelength dispersive X-ray fluorescence spectrometry GB/T 12575 Determination of vanadium content of liquid fuel (flameless atomic absorption spectrometry) GB 13690 chemical classification and hazard communication General GB/T 17040 Petroleum and petroleum products Determination of sulfur content - Energy Dispersive X-ray Fluorescence Spectrometry GB/T 17144 Petroleum products - Determination of carbon residue (micro method) (GB/T 17144-1997, eqvISO 10370.1993) GB/T 20828 diesel fuel transfer combination biodiesel (BD100) GB/T 23801 middle distillate oil fatty acid methyl ester content - Infrared Spectroscopy GB 30000.7-2013 Classification and Labelling of chemicals - Part 7. Flammable liquid SH0164 petroleum product packaging, storage and delivery acceptance rules SH/T 0172 Petroleum products - Determination of sulfur content (high temperature method) SH/T 0175 Determination of oxidation stability of distillate fuel (acceleration method) SH/T 0253 light petroleum products - Determination of total sulfur (power law) SH/T 0604 crude oil and petroleum products densitometry (U-tube vibration method) (SH/T 0604-2000, eqvISO 12185. 1996) SH/T 0689 and light hydrocarbon fuel and other oil products - Determination of total sulfur (UV fluorescence) SH/T 0694 middle distillate fuel cetane index calculation method (four variable equation) (SH/T 0694-2000, eqvISO 4264.1995) SH/T 0701 total residual fuel oil precipitate assay (hot filtration) (SH/T 0701-2001, eqvISO 10307-1.1993) SH/T 0702 total residual fuel oil precipitate assay (aging method) (SH/T 0702-2001, eqvISO 10307-2.1993) SH/T 0706 aluminum and silicon content of fuel oil assay (inductively coupled plasma atomic emission spectrometry and atomic absorption spectrometry) (SH/T 0706-2001, eqvISO 10478.1994) SH/T 0715 crude oil and residual fuel oil, nickel, vanadium, iron determination method (inductively coupled plasma atomic emission spectrometry) SH/T 0765 diesel lubricity evaluation method (high-frequency reciprocating rig method) (SH/T 0765-2005, ISO 12156-1.1997, MOD) NB/SH/T 0842 gasoline and diesel sulfur content single wavelength dispersive X-ray fluorescence spectrometry ISO 8216-1.2010 Petroleum products - Fuels (F category) classification - Part 1. Marine fuel type (Petroleum products-Fuels (classF) classification-Part 1. Categoriesofmarinefuels) ISO 14597 Petroleum products - Determination of vanadium and nickel (Wavelength Dispersive X- ray fluorescence spectrometry) (Petroleumproducts- Determinationofvanadiumandnickelcontent-WavelengthdispersiveX-rayfluorescencespectrome- try) IP501 residue fuel oil, aluminum, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus measured ashing, fusion and inductively coupled plasma emission Spectroscopy (Determinationofaluminium, silicon, vanadium, nickel, iron, sodium, calcium, zincand- phosphorusinresidualfueloilbyashing, fusionandinductivelycoupledplasmaemissionspectrome- try) IP570 fuel of hydrogen sulfide was measured fast liquid extraction (Determinationofhydrogensulfideinfuel oils-Rapidliquidphaseextractionmethod)

3 Classification and designation

Accordance with the standards ISO 8216-1.2010 Group D into the marine fuel oil (distillate fuel) and the R group (residual fuel) two categories. its The distillate fuel is divided into four kinds of DMX, DMA, DMZ and DMB etc; residual fuel into RMA, RMB, RMD, RME, RMG and RMK other six species. According to the sulfur content of distillate fuel into Ⅰ, Ⅱ, Ⅲ three levels; RMA and RMB according to the sulfur content of residual fuel categories are divided into Ⅰ, Ⅱ, Ⅲ Three levels, RMD, RME, RMG and RMK residual fuel is divided into two levels.

4 requirements and test methods

4.1 This standard specifies the test methods in accordance with the detection, marine fuel oil should be in accordance with Table 1 or Table 2 of performance requirements. 4.2 fuel oil should be homogeneous mixture made from petroleum hydrocarbons, do not rule out certain properties and characteristics to improve fuel oil and added added Agent. Fuel oil should be free of inorganic acids and used lubricants. Note. See Appendix K. 4.3 fuel oil can not contain any substance that may cause a ship to use the exception. 4.4 DMX, DMA, DMZ, DMB distillate fuel oil should not exceed contain "trace" of the fatty acid methyl esters from biological materials (FAME) (FAME comply with GB/T 20828 requirements). It does not allow the incorporation of artificial FAME. Note. See Appendix A. 4.5 fuel oil should not be artificially added to the following potential effects of any additives or chemical waste. a) endanger the safety of ships or adversely affect the mechanical properties; b) detrimental to health; c) increase in air pollution. Note. See Appendix B.

5 Inspection Rules

5.1 Inspection Classification and test items 5.1.1 factory inspection Batches of the factory inspection items include. kinematic viscosity, density, cetane index, sulfur content, acid value, flash point, water, 10% distilled residue carbon residue, Carbon residue, pour point, cloud point, appearance, lubricating, carbon aromaticity index (CCAI). In raw materials, production process is not likely to affect the quality of the product changes, the factory periodic inspection items include. oxidation stability, ash , And the total precipitate (hot filtration), total precipitate (aging process), vanadium, sodium, aluminum and silicon, the net calorific value of the item, measured at least once every quarter. NOTE. Hydrogen sulfide negotiated by both parties if detected. 5.1.2 Type inspection Type test items to Chapter 4, Table 1 or Table 2, all of the specified items. Type tested under the following conditions. a) production of new products or appraisement time; b) raw materials, production processes and other large changes that may affect product quality time; c) the factory inspection results are quite different and the last type test results. 5.2 Batch In the raw materials and the production process under the same conditions, each producing a jar batch. 5.3 Sampling According to GB/T 4756 were, taken as a test sample 3L and retention samples. 5.4 determine the rules Factory inspection and type test results comply with all relevant technical requirements of Chapter 4, it is determined that batch of qualified products. 5.5 reinspection rules Such as factory inspection and type test results do not meet the requirements set out in Chapter 4 when, according to the provisions of GB/T 4756 from the same batch of product re Double the amount of the sample drawn for the project failed reinspection, the reinspection results as not meet the requirements, then determine whether the product is defective. 6 packaging, labeling, transportation and storage Marine fuels are flammable liquids according to the relevant provisions of GB 13690 and GB 190 were other products packaging, labeling, transportation Transport, storage and delivery acceptance All products by SH0164.

7 Security

Marine fuels are flammable liquids, the danger warning note in Appendix D. The GB 30000.7-2013

1 marine distillate fuel requirements and test methods table

project index DMX DMA DMZ DMB experiment method Kinematic viscosity (40 ℃)/(mm2/s) is not greater than not less than 5.500 1.400 6.000 2.000 6.000 3.000 11.00 2.000 GB/T 265 Density/(kg/m3) (one of the following requirements) Not more than 15 ℃ Not more than 20 ℃ - 890.0 886.5 890.0 886.5 900.0 896.5 GB/T 1884 and GB/T 1885a Cetane index of not less than 45 40 40 35 SH/T 0694 Sulfur content b (mass fraction) /% ≤ 1.00 0.50 0.10 1.00 0.50 0.10 1.00 0.50 0.10 1.50 0.50 0.10 GB/T 17040c Flash point (closed)/℃ no lower than 60.0 60.0 60.0 60.0 GB/T 261 (Step A) Hydrogen sulfide d/(mg/kg) of not more than 2.00 2.00 2.00 2.00 IP570 (Step A) Acid value (in dollars KOH)/(mg/g) is not greater than 0.5 0.5 0.5 0.5 GB/T 7304 Total deposits (hot filtration) (mass fraction) /% not more than - - - 0.10e SH/T 0701 Oxidation stability/(mg/100mL) is not greater than 2.5 2.5 2.5 2.5f SH/T 0175 10% distilled residue of carbon residue (mass fraction) /% ≤ Carbon residue (mass fraction) /% ≤ 0.30 0.30 0.30 0.30 GB/T 17144 Cloud point/℃ no more than -16 - - - GB/T 6986 Pour point g/℃ no higher than winter summer ---6 -6 GB/T 3535 Appearance Clear he, f, i visually Water (volume fraction) /% not more than - - - 0.30e GB/T 260 Ash (mass fraction) /% ≤ 0.010 0.010 0.010 0.010 GB/T 508 Table 1 (continued) experiment method Lubrication Corrected wear scar diameter (WS1.4) (60 ℃)/μm of not more than 520 520 520 520j SH/T 0765 a measuring method also includes SH/T 0604, disputed results in GB/T 1884 and GB/T 1885 for the arbitration method. b although given the limits which the buyer should be limited in accordance with relevant laws and regulations of ship travel area determines the maximum sulfur content, see Appendix C. c assay method also includes GB/T 387, GB/T 11140, SH/T 0172, SH/T 0253, SH/T 0689, NB/SH/T 0842, disputed results When to GB/T 17040 for the arbitration, the parties recognized before the test using sulfur standard substances syndrome. d See Appendix D, the project negotiated by both parties if detected. e If the sample is opaque, asked to do a total precipitate (hot filtration) and test water, if the sample is transparent, the total precipitate (hot filtration) and moisture test can be To do. f If the sample is opaque, oxidation stability tests can not, oxidation stability limits do not apply, you should determine the total precipitate (hot filtration). g Buyer shall ensure that the pour point requirements for shipboard equipment. Especially the ship running in cold weather conditions. h sample injection 100mL graduated cylinder, at a temperature of 20 ℃ ~ 25 ℃, in the light of good places (non-glare and darkness) observation, there should be no visible precipitate And water. i If the sample opacity, lubricity test can not do, lubrication limit does not apply. j This requirement applies to a sulfur content of less than 0.050% (500mg/kg) crystal clear fuel.

Appendix A

(Informative) Biological products and fatty acid methyl esters (FAMEs) A.1 biofuels and mixtures thereof Because of the mixture of fuel and bio-fuels and bio-oil products are renewable and can reduce greenhouse gases and SOx emissions, and are Some sectors Shipbuilding division in the potential range in alternative energy. Present a large number of bio-fuel is exchanged through an ester reaction product, i.e. removal of ester component to produce fatty acid methyl ester, usually called Biodiesel. Biodiesel may also contain fatty acid ethyl esters (FAEEs), their test methods and specifications are studying development. Biofuels can also be produced by other processing methods; however, not on the use of biofuels by the general ship systems and equipment Experience, so this standard does not express the problem, but an overview of the place in some biological FAME FAME fuel is forced to use, Some of the problems encountered on the market. NOTE. FAME defined in GB/T 20828. Although FAME has good fire resistance, lubricity and easy environment to accept, but there are potential special ship environment, storage and handling Special problems, such as. --- Easily oxidized long-term storage; --- Easy to absorb water and microbial growth; --- Low temperature fluidity deterioration; --- FAME easily deposited on the exposed surfaces, including the filter element. In addition, FAME products from different sources, each with its own storage, handling, processing, and other aspects of engine operation and emission characteristics Particularity. In case you intend to use fuel containing FAME, the ship should ensure that the storage, handling, processing, ancillary equipment and mechanical systems to And any other system components (such as oil and water separator system) and the kind of product compatibility. This standard is specific to only raw materials derived from petroleum, and therefore does not include any biological materials. However, under the existing supply logistics case, FAME diesel and heating oil mixed with practice, so that the ship market almost inevitably some distillate fuel containing FAME, even as refinery processing or mixing materials containing FAME fraction cause some residual fuel oil may contain FAME. A.2 Preventive Measures A.2.1 ship within range of the environment, there is no universal experience relating to the storage, handling, processing and use of properties (including outboard handling), and sit Consider using a mixture of FAME and petroleum products or 100ME safety prevention regulations. In addition, marine engines and other objects Before using the equipment [suc......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 17411-2015_English be delivered?

Answer: Upon your order, we will start to translate GB 17411-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 17411-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB 17411-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB 17411-2015?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 17411-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.