GB/T 17268-2020 English PDFUS$559.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 17268-2020: Non-refillable steel welded cylinders for industrial use Status: Valid GB/T 17268: Historical versions
Basic dataStandard ID: GB/T 17268-2020 (GB/T17268-2020)Description (Translated English): Non-refillable steel welded cylinders for industrial use Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J74 Classification of International Standard: 23.020.30 Word Count Estimation: 30,369 Date of Issue: 2020-12-14 Date of Implementation: 2021-07-01 Older Standard (superseded by this standard): GB/T 17268-2009 Quoted Standard: GB/T 222; GB/T 223.9; GB/T 223.59; GB/T 223.63; GB/T 223.64; GB/T 223.68; GB/T 223.69; GB/T 228.1; GB/T 1804; GB/T 2653; GB/T 2975; GB/T 4336; GB/T 5213; GB/T 13005; GB/T 14193; GB/T 16918; GB/T 17878; GB/T 20066; NB/T 47018.3; TSG Z6001 Adopted Standard: ISO 11118-2015, NEQ Regulation (derived from): National Standard Announcement No. 28 of 2020 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration Summary: This standard specifies the type, design, manufacturing, inspection rules and test methods, marking, coating, etc. of industrial non-refillable welded steel cylinders (hereinafter referred to as steel cylinders). This standard is suitable for use at ambient temperature of -40�桫60��, test pressure PT��6.2MPa (gauge pressure), volume V��25L, PTV��100MPa.L (when PT��4.5MPa, V��5L) , Non-refillable cylinders are classified as Class A refrigerants (limited to low-pressure liquefied gas) according to GB/T 7778. GB/T 17268-2020: Non-refillable steel welded cylinders for industrial use---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.(Industrial non-refillable welded steel cylinders) ICS 23:020:30 J74 National Standards of People's Republic of China Replace GB/T 17268-2009 Industrial non-refillable welded steel cylinders (ISO 11118:2015, Gascylinders-Non-refilablemetalicgascylinders- 2020-12-14 release 2021-07-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee Table of contentsPreface Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Symbol 2 5 Type of cylinder 2 6 Material 3 7 Design 4 8 Design and shape 5 9 Manufacturing 5 10 Inspection rules and test methods 6 11 Marking, coating, packaging, transportation and storage 8 12 Product certificate and quality certificate 9 Appendix A (Normative Appendix) Type Test Items and Judgment Basis 10 Appendix B (Normative Appendix) Welding Procedure Qualification 13 Appendix C (Normative Appendix) Welder Examination Rules 17 Appendix D (informative appendix) Yield point extension 19 Appendix E (Informative Appendix) Product Certificate 20 Appendix F (informative appendix) Format and content of batch inspection quality certificate 21 References 25ForewordThis standard was drafted in accordance with the rules given in GB/T 1:1-2009: This standard replaces GB/T 17268-2009 "Industrial Non-refillable Welded Steel Cylinders", compared with GB/T 17268-2009, except for The main technical changes outside of the editorial modification are as follows: ---Modified the scope of application of the standard (see Chapter 1, Chapter 1 of the:2009 edition); ---Modified the requirements for bottle body materials and welding materials (see 6:1:1, 6:1:3, 6:1:1, 6:1:3 of the:2009 edition); ---Added the welding method requirements for the pressure welding seam connecting the valve seat and the cylinder body (see 9:2:3); ---Added material verification test and wall thickness measurement requirements (see 10:1, 10:3:1); ---Modified the requirements of the air pressure test (see 10:2:2, 10:1:2 of the:2009 edition); ---Added the artificial aging requirements for the water pressure blasting test sample bottle (see 10:3:3:1); ---Modified the welding procedure qualification (see Appendix B, Appendix B of the:2009 edition); ---Modified the welder examination rules (see Appendix C, Appendix C of the:2009 edition); --- Added Appendix D "Yield Point Extension" (see Appendix D): This standard uses the redrafting method to refer to the edition of ISO 11118:2015 "Specifications and test methods for non-refillable metal gas cylinders for gas cylinders" The degree of consistency with ISO 11118:2015 is not equivalent: Please note that certain contents of this document may involve patents: The issuing agency of this document is not responsible for identifying these patents: This standard was proposed and managed by the National Gas Cylinder Standardization Technical Committee (SAC/TC31): Drafting organizations of this standard: Zhejiang Jucheng Steel Cylinder Co:, Ltd:, China Special Equipment Inspection and Research Institute, Shanghai Special Equipment Supervision and Inspection Technology Research Institute, Zhejiang Golden Elephant Technology Co:, Ltd:, Wuyi Xilinde Machinery Manufacturing Co:, Ltd:, Sanjiang Kaiyuan Co:, Ltd:, Zhejiang Ansheng Machinery Manufacturing Co:, Ltd:, Jiangsu Kaisidi Chemical Machinery Co:, Ltd: The main drafters of this standard: Huang Qianghua, Wei Chunhua, Xu Weipu, Lin Jianhua, Ye Xiaoru, Wang Yuhang, Zhu Zhenri, Tang Jianxiong, Lin Kangsheng, Shan Dongfang: The previous versions of the standard replaced by this standard are as follows: ---GB 17268-1998, GB/T 17268-2009: Industrial non-refillable welded steel cylinders1 ScopeThis standard specifies the type, design, manufacturing, inspection rules and test methods of industrial non-refillable welded steel cylinders (hereinafter referred to as steel cylinders) Method, marking, coating, etc: This standard is suitable for use at ambient temperature of -40℃~60℃, test pressure PT≤6:2MPa (gauge pressure), volume V≤ 25L, PTV≤100MPa·L (when PT >4:5MPa, V≤5L), non-refilling toxicity is classified as Class A refrigeration according to GB/T 7778 (Liquid gas at low pressure): Note: Steel cylinders must not be used to fill compressed gas:2 Normative referencesThe following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article Pieces: For undated references, the latest version (including all amendments) applies to this document: GB/T 222 The allowable deviation of the chemical composition of the finished steel GB/T 223:9 Steel and alloy determination of aluminum content-Chromazurol S spectrophotometric method GB/T 223:59 Steel and alloy determination of phosphorus content-Bismuth phosphomolybdenum blue spectrophotometric method and antimony phosphomolybdenum blue spectrophotometric method GB/T 223:63 Methods for chemical analysis of iron, steel and alloy-The sodium (potassium) periodate photometric method for the determination of manganese content GB/T 223:64 Steel and alloy determination of manganese content by flame atomic absorption spectrometry GB/T 223:68 Methods for chemical analysis of iron, steel and alloy, the determination of sulfur content by potassium iodate titration after combustion in a tube furnace GB/T 223:69 Steel and alloy carbon content determination after combustion in tube furnace gas volume method GB/T 228:1 Tensile Test of Metallic Materials Part 1: Room Temperature Test Method GB/T 1804 General Tolerance Tolerance of linear and angular dimensions without tolerance GB/T 2653 Bend test method for welded joints GB/T 2975 Steel and steel product mechanical performance test sampling location and sample preparation GB/T 4336 Carbon steel and low- and medium-alloy steel determination of multi-element content Spark discharge atomic emission spectrometry (conventional method) GB/T 5213 Cold rolled low carbon steel plate and steel strip GB/T 13005 Gas cylinder terminology GB/T 14193 Liquefied gas cylinder filling regulations GB/T 16918 Bursting disc safety device for gas cylinders GB/T 17878 Industrial bottle valves for non-refillable welded steel cylinders GB/T 20066 Sampling and sample preparation methods for the determination of the chemical composition of steel and iron NB/T 47018:3 Technical conditions for ordering welding consumables for pressure equipment Part 3: Gas shielded arc welding wire and filler wire TSGZ6001 Special equipment operator assessment rules3 Terms and definitionsThe following terms and definitions defined in GB/T 13005 apply to this document: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17268-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 17268-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 17268-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17268-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 17268-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17268-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
