GB 14536.9-2008 English PDFUS$889.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 14536.9-2008: [GB/T 14536.9-2008] Automatic electrical controls for household and similar use -- Particular requirements for electrically operated water valves, including mechanical requirements Status: Valid GB 14536.9: Historical versions
Basic dataStandard ID: GB 14536.9-2008 (GB14536.9-2008)Description (Translated English): [GB/T 14536.9-2008] Automatic electrical controls for household and similar use -- Particular requirements for electrically operated water valves, including mechanical requirements Sector / Industry: National Standard Classification of Chinese Standard: K32 Classification of International Standard: 29.120.40 Word Count Estimation: 34,349 Date of Issue: 2008-09-19 Date of Implementation: 2009-06-01 Older Standard (superseded by this standard): GB 14536.9-1996 Adopted Standard: IEC 60730-2-8-2003, IDT Regulation (derived from): Announcements of national standards in 2008 No. 16 (No. 129 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Chinese standard applies to equipment for household and similar purposes, or used in conjunction with these devices electrically operated water valves, these devices can be used electricity, gas, oil, solid fuel, solar and other energy sources or a combination of applications, including heating, air conditioning and similar purposes. This standard also applies to the GB 4706 involved with all kinds of electric appliance valve. This standard contains a valve electrical performance and mechanical valve performance requirements, both of which are expected to affect the valve operation. This standard applies to the inherent safety of electric valve for equipment protection operations involving values ??and operating procedures applicable to equipment for household and similar purposes, or used in conjunction with these devices Automatic electrical controls for tests. GB 14536.9-2008: [GB/T 14536.9-2008] Automatic electrical controls for household and similar use -- Particular requirements for electrically operated water valves, including mechanical requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Automatic electrical controls for household and similar use.Particular requirements for electrically operated water valves, including mechanical requirements ICS 29.120.40 K32 National Standards of People's Republic of China GB 14536.9-2008/IEC 60730-2-8.2003 Replacing GB 14536.9-1996 Household and similar electrical automatic controller Particular requirements for electrically operated water valves (including mechanical requirements) (IEC 60730-2-8.2003, IDT) Posted 2008-09-19 2009-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ IEC Introduction Ⅴ 1 Scope and normative references 1 2 Definitions 2 3 General Requirements 5 4 General notes 5 Rating 5 5 6 Category 5 7 7 Information 8 8 Protection against electric shock 9 9 ground protection measures 10 Terminals and terminations 9 11 structural requirements 9 Moisture and dust 9 12 13 Electric strength and insulation resistance 10 14 Fever 10 15 Manufacturing deviation and drift 11 16 11 Environmental Stress 17 11 Durability Mechanical strength 18 12 19 Threaded parts and connections 14 20 creepage distances, clearances and distances through solid insulation through 14 21 heat, fire and tracking-resistant 14 Corrosion 22 14 23 Electromagnetic compatibility (EMC) emission requirements --- 14 24 assembly 14 25 normal operation 14 26 Electromagnetic compatibility (EMC) requirements --- Immunity 14 27 non-normal operation 14 28 Guidelines for the use of electronic disconnecting 16 Figure 16 Appendix 17 Requirements Annex H (normative) electronic controller 17 Annex AA (informative) Relationship between different flow coefficients 18 Appendix BB (normative) measuring device consists of a valve caused the instantaneous pressure 19 Annex CC (normative) Test on a predetermined main supply pipe connected to the valve body 21 of thermoplastic material Appendix DD (normative) Torque 22 Test Appendix EE (normative) Test declared by the pressure does not exceed 1.0MPa (10bar) of the valve causes the instantaneous pressure Means 25 GB 14536.9-2008/IEC 60730-2-8.2003ForewordAll technical content in this section is mandatory. GB 14536 "Household and similar electrical automatic controller" is divided into two parts. Part 1. GB 14536.1 General requirements Part 2. GB 14536.3 - Particular requirements for thermal motor protectors Particular requirements GB 14536.4 tubular fluorescent lamp ballasts thermal protectors GB 14536.5 sealed and semi-hermetic motor compressor motor thermal protection Particular requirements GB 14536.6 Particular requirements for automatic electrical burner control systems GB 14536.7 pressure sensitive Particular requirements for electrical controls GB 14536.8 Particular requirements for timers and time switches GB 14536.9 Particular requirements for electrically operated water valves (including mechanical requirements) GB 14536.10 - Particular requirements for temperature sensing controls GB 14536.11 Particular requirements for motor starting relays GB 14536.12 - Particular requirements for energy regulators GB 14536.13 Particular requirements for electrically operated door locks GB 14536.14 - Particular requirements for household washing machine controller GB 14536.15 Particular requirements for humidity sensing controls GB 14536.16 Particular requirements for electric actuators Special requirements of the float or electrode-sensitive automatic electrical water level sensing controller GB 14536.17 in boiler used GB 14536.18 float type for household and similar use Particular requirements for water level controller GB 14536.19 Particular requirements for electrically operated gas valves, including mechanical requirements This section is equivalent to using the International Electrotechnical Commission IEC 60730-2-8.2000 "Household and similar electrical controls - Part 2. Particular requirements for electrically operated water valves, including mechanical requirements "(and its 2002 Amendment 1). This section, there is a corresponding national standard, the reference of national standards; no national standards, the reference listed IEC standards. This section Choreography sequence Chapter 2 normative references and IEC 60730-2-8 different. For ease of use, this section made the following editorial changes. a) "This standard" be replaced by "this section"; b) use a decimal point instead of a decimal comma ",". ","; c) increase the national standard foreword. This Part replaces GB 14536.9-1996 "Household and similar electrical controls - Particular requirements for electrically operated water valves (including mechanical Requirements) "(idt IEC 60730-2-8.1992). Compared with GB 14536.9-1996 part of the main changes are as follows. a) an increase in Appendix H, appendix EE; b) "in some countries" to name specific countries. This section should be GB 14536.1-2008 (identical with IEC 60730-1.2003) with the use, if the version of the difference may be due Can cause problems when used in this section, you should refer to the appropriate version of the original IEC standard. GB 14536.9-2008/IEC 60730-2-8.2003 This part of the appendix H, Appendix AA, Appendix BB, Appendix CC, Appendix DD, EE Appendix normative appendix. This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee household automatic control (SAC/TC212) centralized. This section drafted by. China Electric Apparatus Research Institute, Shanghai CIQ. Drafters of this section. Core hole Xun, Huang Kaiyun, Fupei Gang. This section commissioned the National Standardization Technical Committee household automatic controller responsible for the interpretation. This part of the standard replaces the previous editions as. GB 14536.9-1996. GB 14536.9-2008/IEC 60730-2-8.2003 IEC Foreword 1) IEC (International Electrotechnical Commission) is a worldwide standardization group composed of national electrotechnical committees (IEC National Committees) Organizations. The object of IEC is to promote international cooperation on issues related to the standardization of the electrical and electronic fields. For this purpose IEC addition to other activities, but also publishes International Standards. These standard-setting work is entrusted to technical committees Completed. As a member of IEC National Committees, as long as the interest of the standard to be developed, may participate in the development of its work Make. Liaising with the IEC 's international, official or unofficial organizations are also involved in the development of standards. IEC and the World Organization for Standardization (ISO ) in accordance with the conditions specified in the agreement, close cooperation. 2) since each technical committee has representatives from the National Commission on the relevant issues of interest, so the IEC on technical Issue formal decisions or agreements on the maximum expression of the international consensus on the relevant issues. 3) documents generated in the form of recommendations for international use, and standards, technical specifications, technical reports or guidelines published in the form, And National Committees in that sense of acceptance. 4) In order to promote international unification, IEC National Committees in charge of the IEC international standards transparently converted to the maximum extent possible National or regional standards. Between the IEC Standard and the corresponding national or regional standard if there is any difference, it should be converted into the standard After clearly illustrates. 5) IEC did not develop any signs of approval procedures, in case a device is declared in conformity with an IEC standard is, this is not IEC Accountable. 6) It is noteworthy that this International Standard may involve some parts of the patent. IEC for the identification of some or all of this A Class of the patent will be irresponsible. IEC 60730-2-8 international standard by the IEC TC72. home automation controller Technical Committee. The IEC 60730-2-8 standard enhanced version based on the second edition (2000) [documents 72/428/FDIS and 72/439/RVD] and Amendment One (2002) [documents 72/553/FDIS and 72/557/RVD]. It constitutes 2.1 version. The vertical bar represents the margin here in the original version of the revision has been a modification. According to this publication section ISO /IEC Guide to the drafting of the third. Part 2 of this article should be used in conjunction with IEC 60730-1. It is based on IEC 60730-1 third edition (1999) formed the basis of. IEC 60730-1 should be considered in future editions or revised pieces. The first part 2 supplements or modifies the corresponding provisions of IEC 60730-1, to make it into the IEC standard. Safety requirements for electrically operated water valves (Including mechanical requirements). Part 2, where marked "increase", "modification" or "replacement" of the place, in Part 1 of the corresponding requirements, test specifications or comments should be Amended accordingly. Where the need to modify the Department, Part 2 will be indicated in the corresponding provisions of Part 1 is applicable. The development of international standards, each country must be considered in all regions due to the different requirements of the actual situation formed, and each country should be recognized Electrical systems and wiring codes family differences. In Part 2 of this article, note the differences in different countries in order to give "in some countries" form; see these differences. --- Table 7.2 and 114 113; --- 14.7.4, note 101; --- 16.2.1; --- 27.2.101.1; --- 27.101; GB 14536.9-2008/IEC 60730-2-8.2003 --- H. 26.2.1; --- Appendix CC; --- Table DD. 1.2.1, Note 1; --- Table DD. 6, note 1. In this publication. 1) using the following printing fonts. Requirements Body. Roman font. Test specifications. italic type. Note. small roman type. 2) an increase in the base portion of the first strip those, notes, projects and numbered starting from 101, additional annexes to the letters AA, BB, etc. represent. The Committee decided to revise this publication and its contents remain unchanged until 2005. And to this date, the publication will be. ● reconfirmed; ● Cancel; ● The revised version of the alternative, or ● Amendment. GB 14536.9-2008/IEC 60730-2-8.2003 Household and similar electrical automatic controller Particular requirements for electrically operated water valves (including mechanical requirements)1 Scope and normative references14536.1-2008 GB in the chapter replaced by the following. instead. 1.1 section applies to household and similar devices or devices used in conjunction with the electric valves, these devices can use Electricity, gas, oil, solid fuels, such as solar energy or a combination of applications including heating, air conditioning and similar applications. This section also applies to the GB 4706 involved various types of appliances with electric valve. 1.1.1 This section contains the mechanical properties of the valve and the valve's electrical performance requirements, both of which will affect the expected operation of the valve. 1.1.2 This section applies to the inherent safety of electric valves for equipment related to the protection of the operating values and operating procedures applicable to home Use and similar equipment or testing with these devices for use with electrical automatic controller. For non-general household electric valve device, and these devices by non-professionals, such as a store or factory or farm light used, It is also included within the scope of this. This section does not apply to electric water valve dedicated to industrial equipment. This section does not apply to. Nominal connection size DN50 or more electric valve; The nominal value of allowable pressure 1.6MPa or more electric valve; Food distributor; Detergent dispenser; Steam valve. In this section, when not misleading, the following terms have specific meanings. --- The term "valve" means an electric valve (including starters and valve assembly). --- "Starters" The word means "electric actuator mechanism or the original." --- "Body" The word means "body components." --- The term "device" includes "instrument and control systems." 1.1.3 This section applies to starters and matched body. No electrical output 1.1.4 This section applies to a single valve, grouped together as a system of valves and components with the multi-function controller mechanically Valve. Note. It should be noted that in many countries, the company developed a Water Authority or additional testing requirements and rules. 1.5 Reference Standard GB 14536.1-2008 in that section is applicable except as follows. increase. ISO 7-1.1994 Part 1 formed pipe thread seal on the threaded connection. name, size and deviations ISO 65. 1981 applies to the carbon steel pipe according to ISO 7-1 tapping ISO 228-1.1994 is not formed into a tube connected to the threaded portion of the seal of the first threads. name, size and deviations ISO 630.1995 ISO 7-1 by tapping construction steel accessories ISO 1179. 1981 thread according to ISO 228-1 of industrial pipes connecting with the flat end steel and other metal pipe ISO 4144. 1979 to ISO 7-1 threads of stainless steel fittings GB 14536.9-2008/IEC 60730-2-8.2003 ISO 4400.1994 Fluid power systems and components - Three - pin plug connector and performance requirements Two pin plug connector 1994 for fluid power systems and components with ground socket - - Characteristics and requirements. ISO 69522 DefinitionsGB 14536.1-2008 in this chapter are applicable except as follows. 2.2 is defined by use classification controller 2.2.17 increase. NOTE. Artificial open automatically shut down or automatically turn on manual semi-automatic closing valves are also within the scope of this definition. Increase the following provisions. 2.2.17.101 A connector from the starter to the valve assembly means constituted by closed or partially closed spout to turn off or adjust the water flow. 2.2.17.102 A connector to a water source and the water flow control valve. Note. The valve belonging to Type 1 action. Means for switching the valve device may be a type 1 or type 2 action. 2.2.17.103 A method for controlling the heating system water cycle valve. 2.2.17.104 A method for the implementation of the valve opening and closing operation of the institution or the original electric actuator. Note 1. The starter can be fixed to the valve body and the valve assembly integrally formed, or provided as discrete components. Note 2. The starter can also include valves and closure. 2.2.17.105 An apparatus body, import and export terminal fittings, valve seats, valve closure member and the valve stem or shaft include. Note. In some cases the stem and the closure may be part of the starter. 2.2.17.106 A portion of the valve assembly, is to limit the pressure of the main components. It provides end fittings and flow channels together. 2.2.17.107 One size digital representation of this size for liquid conduction system, in addition to using the peripheral diameter or thread size representation of member All parts are common. Note 1. This size can be made after the DN with a suitable number has been rounded to indicate that this number is used for reference purposes only. Note 2. Some older international standard nominal size is an indicator of nominal diameter, for the purposes of this section, the two terms are synonymous. 2.2.17.108 Pressure numerical rating. NOTE. This nominal value can consist of letters "PN" (also considered a number of pressure pressurenumber Abbreviation) after with a suitable number has been rounded to the table Shows, this number is used for reference purposes only. GB 14536.9-2008/IEC 60730-2-8.2003 2.2.17.109 Used to form the body structure sealed connection with the liquid conduction system. 2.2.17.110 And full closure of the contact surface of the nozzle inside the valve. 2.2.17.111 Positioned in the flow path, you can change the flow of the moving parts. Note. The closure may be a plug, ball, disc blades, turnstile and so on. 2.2.17.112 The starter is connected to the closure assembly and closure positioning. Note 1. If it is a rotary valve, then use the "valve stem" instead of "stem." Note 2. In some controllers, the stem may be part of the starter. 2.2.17.113 Refers to such a tapered tube, pipe expansion, bending joints, tee such components, these components fitting directly connected with the side of the valve assembly. 2.3 function controller and related definitions Increase the following provisions. 2.3.101 Only on or off without any intermediate position of the valve. 2.3.102 In the non-energized valve is closed. 2.3.103 In the non-energized valve is opened. 2.3.104 Within a predetermined range of flow control valve flow. 2.3.105 Having one or more inlet and outlet valves, and can make any liquid from flowing into the confluence of the outflow from any outlet. 2.3.106 The outlet side of the valve in the closed position when no flow element is located. 2.3.107 From the closed position of the closure distance. 2.3.108 Closure member from the closed position to the fully open position distance. GB 14536.9-2008/IEC 60730-2-8.2003 2.3.109 The outlet side of the valve has a water outflow, the closure position. 2.3.110 When the water flow through the valve is rated flow, the closure location. 2.3.111 In unit time through water valve. 2.3.112 Under reference conditions at a given temperature and a predetermined pressure, pressure, flow rates rated travel time. 2.3.113 At a given pressure, can be determined by the total amount of water valve coefficient. Note 1. The constant flow rate can be called flow coefficient. Note 2. The use of a different relationship between the flow rate constant is given in Annex AA. 2.3.114 For the starter closure action, and to overcome between the inlet and outlet valves of two opposite forces specified maximum pressure. 2.3.115 The minimum pressure required by the valve open or closed the. 2.3.116 vacancy. 2.3.117 In some water systems, since a valve closing as required to produce the ultra-instantaneous pressure. 2.3.118 In some of the water supply system due to the shut-off valve in normal use caused excessive instantaneous pressure. 2.3.119 Any special precautions are not taken directly with water possible water hammer is connected to a valve, when it is open, does not cause Excessive pressure drop, and when closed, without the formation of excessive instantaneous pressure. 2.13 Other definitions Increase the following provisions. 2.13.101 Defined as suitable for human drinking water supply. NOTE. In some standards, "drinking water" means "to drink the water." 2.13.102 Defined as unfit for human drinking water. GB 14536.9-2008/IEC 60730-2-8.20033 General requirementsGB 14536.1-2008 in this chapter shall apply. General Description 4 Test The 14536.1-2008 GB This chapter is applicable except as follows. 4.1 Test conditions 4.1.2 A......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 14536.9-2008_English be delivered?Answer: Upon your order, we will start to translate GB 14536.9-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 14536.9-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB 14536.9-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB 14536.9-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 14536.9-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
