GB/T 14196.3-2023 English PDFUS$609.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 14196.3-2023: Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) Status: Valid GB/T 14196.3: Historical versions
Basic dataStandard ID: GB/T 14196.3-2023 (GB/T14196.3-2023)Description (Translated English): Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K71 Classification of International Standard: 29.140.20 Word Count Estimation: 30,326 Date of Issue: 2023-12-28 Date of Implementation: 2026-01-01 Older Standard (superseded by this standard): GB 14196.3-2008 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 14196.3-2023: Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 29:140:20 CCSK71 National Standards of People's Republic of China Replace GB 14196:3-2008 Incandescent lamp safety regulations Part 3: Tungsten halogen lamps (for non-motor vehicles) Part 3:Tungsten-halogenlamps(non-vehicle) (IEC 60432-3:2012, MOD) Published on 2023-12-28 Implemented on 2026-01-01 State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPreface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 requests 4 5 Rating 6 Appendix A (Normative) Symbol 12 Appendix B (Normative) Method for testing lamp air pressure 13 Appendix C (Normative) Induced Failure Test 14 Appendix D (Normative) Lamp design requirements 16 Appendix E (normative) Qualification conditions for type testing 21 Appendix F (informative) Measurement method of glass bulb wall temperature 22 Reference 23ForewordThis document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document is Part 3 of GB/T 14196 "Safety Specifications for Incandescent Lamps": GB/T 14196 has released the following parts: ---Part 1: Tungsten filament lamps for general lighting in homes and similar situations; ---Part 2: Tungsten halogen lamps for general lighting in homes and similar occasions; ---Part 3: Tungsten halogen lamps (for non-motor vehicles): This document replaces GB 14196:3-2008 "Safety Requirements for Incandescent Lamps Part 3: Tungsten Halogen Lamps (For Non-Motor Vehicles)" and is consistent with Compared with GB 14196:3-2008, in addition to structural adjustments and editorial changes, the main technical changes are as follows: ---Added "fault" terms and definitions (see 3:26); --- Added requirements for cold air pressure and testing technical regulations for lamps with built-in protective covers (see 4:5, Appendix B); ---Added description of requirements for photobiological safety in compliance with IEC 62471 (see D:13): This document is modified to adopt IEC 60432-3:2012 "Safety Specifications for Incandescent Lamps Part 3: Tungsten Halogen Lamps (For Non-Motor Vehicles)": Compared with IEC 60432-3:2012, this document has made the following structural adjustments: ---Chapter 1 corresponds to 1:1 in IEC 60432-3:2012; ---Chapter 2 corresponds to 1:2 in IEC 60432-3:2012; ---Chapter 3 corresponds to 1:3 in IEC 60432-3:2012; ---Chapter 4 corresponds to Chapter 2 in IEC 60432-3:2012; ---Chapter 5 corresponds to Chapter 3 in IEC 60432-3:2012; ---Appendix D corresponds to Appendix C in IEC 60432-3:2012; ---Appendix E corresponds to Appendix D in IEC 60432-3:2012; ---Appendix F corresponds to Appendix E in IEC 60432-3:2012; ---Appendix C corresponds to Appendix F in IEC 60432-3:2012: The technical differences between this document and IEC 60432-3:2012 and their reasons are as follows: ---The normative reference of IEC 62471-2 has been deleted: The referenced technical content is included in IEC 62471 and there is no substantive technology: Differences (see Chapter 1); ---Replaced IEC 60050-845 with GB/T 2900:65 for more harmonious standard use (see Chapter 3); ---Replaced IEC 60357 with GB/T 14094-2016 for more harmonious standard use (see 4:1); ---Replaced IEC 60061-4 with GB/T 21098 for more harmonious standard use (see 4:3:2); ---Replaced IEC 60432-1 with GB/T 14196:1-2023 for more coordinated use of the standard (see 4:6): The following editorial changes have been made to this document: ---Replaced the informative reference of IEC 60432-1 with GB/T 14196:2, and there are no technical differences in the cited content (see Section 1 Chapter, 3:6, 4:2:2); ---Replaced the informative reference of IEC 60127-2 with GB/T 9364:2, and there are no technical differences in the cited content (see Table D:1); ---Replaced the informative reference of IEC 60269-3 with GB/T 13539:3, and there are no technical differences in the cited content (see Table D:2); ---Replaced the informative reference of IEC 60682 with GB/T 20152, and there are no technical differences in the cited content (see D:9, F:2): Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by China Light Industry Federation: This document is under the jurisdiction of the National Lighting Appliances Standardization Technical Committee (SAC/TC224): This document was drafted by: Hangzhou Hanguang Lighting Co:, Ltd:, National Electric Light Source Quality Supervision and Inspection Center (Beijing), Beijing Electric Light Source Research Co:, Ltd:, Deqing Blue Bird Lighting Electric Co:, Ltd:, Zhejiang Fangda Standard Information Co:, Ltd: The main drafters of this document: Yu Zhikun, Zhang Bo, Lu Xiaosi, Shen Jinxiang: The previous versions of this document and the documents it replaces are as follows: ---First released in:2008 as GB 14196:3-2008; ---This is the first revision, transforming from a mandatory national standard into a recommended national standard:IntroductionGB/T 14196 "Safety Specifications for Incandescent Lamps" aims to stipulate the safety requirements for incandescent lamps and is intended to be composed of three parts: ---Part 1: Tungsten filament lamps for general lighting in homes and similar occasions: The purpose is to specify the incandescent tungsten filament lamps used for general lighting: Safety and related interchangeability requirements: ---Part 2: Tungsten halogen lamps for general lighting in homes and similar occasions: The purpose is to specify the safety and interaction of tungsten halogen lamps for general lighting: Exchange requirements: It includes tungsten halogen lamps that directly replace traditional tungsten lamps and new types that are not specified in GB/T 14196:1 Tungsten halogen lamp: ---Part 3: Tungsten halogen lamps (for non-motor vehicles): The purpose is to stipulate that the rated voltage is below 250V for projection, photography, general purpose Safety requirements for single-ended and double-ended tungsten halogen lamps used in lighting, stage lighting, special purpose lighting and general purpose lighting: GB/T 14196 is published as a series of standards divided into several parts, with specific provisions for various types of incandescent lamps: The purpose is to facilitate the standardization use and maintenance: Incandescent lamp safety regulations Part 3: Tungsten halogen lamps (for non-motor vehicles)1 ScopeThis document specifies the safety requirements for single-ended and double-ended tungsten halogen lamps with a rated voltage not exceeding 250V for the following purposes: ---Projection (including movie projection and still projection); ---Photography (including studio); ---Flood lighting; ---Special purpose lighting; ---General purpose lighting; ---Stage lighting: This document specifies the photobiological safety requirements in accordance with IEC 62471: Risk of failure of lamps as specified in this document as shown below Category Flag Risk Level: a) Flood lighting; b) General lighting shaded lamps; c) General lighting reflector lamps: This document does not apply to single-ended tungsten halogen lamps for general lighting used to replace traditional tungsten filament lamps as specified in GB/T 14196:2:2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: GB/T 2900:65 Electrical terminology lighting (GB/T 2900:65-2023, IEC 60050-845:2020, IDT) GB/T 14094-2016 Performance requirements for tungsten halogen lamps (for non-motor vehicles) (IEC 60357:2011, NEQ) GB/T 14196:1-2023 Safety specifications for incandescent lamps Part 1: Tungsten filament lamps for general lighting in households and similar occasions (IEC 60432-1:2011, MOD) GB/T 21098 Lamp caps, lamp holders and gauges for testing their safety and interchangeability Part 4: Guidelines and general information (GB/T 21098-2022,IEC 60061-4:2018,IDT) IEC 60061-1 Lampcaps, lampholders and gauges for testing their safety and interchangeability Part 1: Lampcaps and Note: GB/T 1406 (all parts) Type and size of lamp holder (IEC 60061-1) IEC 60061-3 Lampcaps, lampholders and gauges for testing their safety and interchangeability Part 3: Gauges (Lampcapsand Note: GB/T 1483 (all parts) Inspection gauge for lamp holders and lamp holders (IEC 60061-3)3 Terms and definitionsThe terms and definitions defined in GB/T 2900:65 and the following apply to this document: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14196.3-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 14196.3-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 14196.3-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14196.3-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 14196.3-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14196.3-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
