GB/T 14196.1-2023 English PDFUS$849.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 14196.1-2023: Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes Status: Valid GB/T 14196.1: Historical versions
Basic dataStandard ID: GB/T 14196.1-2023 (GB/T14196.1-2023)Description (Translated English): Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K71 Classification of International Standard: 29.140.20 Word Count Estimation: 42,467 Date of Issue: 2023-12-28 Date of Implementation: 2026-01-01 Older Standard (superseded by this standard): GB 14196.1-2008 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 14196.1-2023: Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 29:140:20 CCSK71 National Standards of People's Republic of China Replace GB 14196:1-2008 Incandescent lamp safety regulations Part 1: Family and similar occasions Tungsten lamp for general lighting lightingpurposes (IEC 60432-1:2011, MOD) Published on 2023-12-28 and implemented on 2026-01-01 State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPrefaceⅠ Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Requirements 3 5 Rating 9 Appendix A (Normative) Various test procedures 14 Appendix B (Normative) Packaging Symbols 15 Appendix C (normative) Test procedure for torque resistance 16 Appendix D (informative) Lamp design requirements 19 Appendix E (normative) Induced fault test 21 Appendix F (normative) End-of-life test 24 Appendix G (Normative) Integration, sampling and qualification determination methods of induced failure tests 25 Appendix H (Normative) Acceptance Number for Various Sample Quantities and AQL28 Appendix I (Normative) Qualification Criteria---The measurement result is a continuous variation 34 Appendix J (normative) Measurement method of power supply impedance 36 Reference 38ForewordThis document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document is Part 1 of GB/T 14196 "Safety Specifications for Incandescent Lamps": GB/T 14196 has released the following parts: ---Part 1: Tungsten filament lamps for general lighting in homes and similar situations; ---Part 2: Tungsten halogen lamps for general lighting in homes and similar occasions; ---Part 3: Tungsten halogen lamps (for non-motor vehicles): This document replaces GB/T 14196:1-2008 "Safety Requirements for Incandescent Lamps Part 1: Tungsten Filament for General Lighting in Households and Similar Occasions "Lamps", compared with GB/T 14196:1-2008, in addition to structural adjustments and editorial changes, the main technical changes are as follows: ---Added photobiological safety requirements (see Chapter 1); ---Corrected the application error of the minimum outer diameter gauge of the E14 lamp cap thread (see 4:10): This document is modified to adopt IEC 60432-1:2011 "Safety Specifications for Incandescent Lamps Part 1: Tungsten for general lighting in households and similar occasions" Silk Lamp": Compared with IEC 60432-1:2011, this document has made the following structural adjustments: ---Chapter 1, Chapter 2, Chapter 3, Chapter 4, and Chapter 5 respectively correspond to 1:1, 1:2, 1:3, Chapter 2, and Chapter 3; ---Appendix D corresponds to Appendix K in IEC 60432-1:2011; ---Appendix E corresponds to Appendix D in IEC 60432-1:2011; ---Appendix F corresponds to Appendix E in IEC 60432-1:2011; ---G:2, G:3, G:4, G:5, and G:6 correspond to H:1, H:2, H:3, H:4, and H:5 in IEC 60432-1:2011 ; ---Appendix H corresponds to Appendix F in IEC 60432-1:2011; ---Appendix I corresponds to Appendix G in IEC 60432-1:2011: The technical differences between this document and IEC 60432-1:2011 and their reasons are as follows: ---The normative reference of IEC 62471-2 has been deleted: The referenced technical content is included in IEC 62471 and there is no substantive technology: Differences (see Chapter 1); ---Replaced IEC 60432-2 with GB/T 14196:2-2023 for more harmonious standard use (see 4:9); ---Deleted the normative reference to IEC 60410, which has been abolished (see Table 6 of IEC 60432-1:2011); ---Deleted the normative reference to ISO 3951, which has been abolished (see Appendix G of IEC 60432-1:2011); The following editorial changes have been made to this document: ---Replaced IEC 60598-1 with GB/T 7000:1 (see Appendix B and Appendix D): Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by China Light Industry Federation: This document is under the jurisdiction of the National Lighting Appliances Standardization Technical Committee (SAC/TC224): This document was drafted by: Anhui Nengtong New Energy Technology Co:, Ltd:, Beijing Electric Light Source Research Institute Co:, Ltd:, Shandong Huatai Light Source Co:, Ltd: company: The main drafters of this document: Wang Yousuo, Wang Chong, Song Deji: The previous versions of this document and the documents it replaces are as follows: ---First published as GB 14196:1-2002 in:2002, first revised in:2008; ---This is the second revision, transforming the mandatory national standard into a recommended national standard:IntroductionGB/T 14196 "Safety Specifications for Incandescent Lamps" aims to stipulate the safety requirements for incandescent lamps and is intended to be composed of three parts: ---Part 1: Tungsten filament lamps for general lighting in homes and similar occasions: The purpose is to specify the incandescent tungsten filament lamps used for general lighting: Safety and related interchangeability requirements: ---Part 2: Tungsten halogen lamps for general lighting in homes and similar occasions: The purpose is to specify the safety and interaction of tungsten halogen lamps for general lighting: Interchangeability requirements, which include tungsten halogen lamps that directly replace traditional tungsten lamps and new types of lamps that are not specified in GB/T 14196:1 Tungsten halogen lamp: ---Part 3: Tungsten halogen lamps (for non-motor vehicles): The purpose is to stipulate that the rated voltage is below 250V for projection, photography, general purpose Safety requirements for single-ended and double-ended tungsten halogen lamps used in lighting, stage lighting, special purpose lighting and general purpose lighting: GB/T 14196 is published as a series of standards divided into several parts, with specific provisions for various types of incandescent lamps: The purpose is to facilitate the standardization use and maintenance: Incandescent lamp safety regulations Part 1: Family and similar occasions Tungsten lamp for general lighting1 ScopeThis document specifies the safety and related interchangeability requirements for incandescent tungsten lamps for general lighting: This document also specifies the manufacturer's instructions for indicating The method that should be used for products that comply with this document is based on the evaluation of all products and is related to the test records of the finished lamps: This method Methods can also be used for authentication: This document also specifies inspection procedures for limited evaluation of batch products: This document only stipulates the safety requirements of the product, but does not cover its performance requirements, such as luminous flux, life, power consumption, etc: For general For the requirements in these aspects for common types of tungsten filament lamps used for general lighting, see IEC 60064: This document specifies the photobiological safety requirements in accordance with IEC 62471: Lamps specified in this document do not meet the required risk category markings Risk level: This document applies to lamps with the following characteristics: ---Rated power is below:200W (including:200W); ---The rated voltage is between 50V~250V (including 50V and 250V); ---The shape of the glass bulb is A, B, C, G, M, P, PS, PAR, R, or other shapes with the same purpose; ---Various glass bulbs with surface treatment; ---The lamp head is B15d, B22d, E12, E14, E17, E26, E26d, E25/50×39, E27 or E27/51×39: Within the limits of reasonable application, this document also applies to lamps with the same purpose and using other shapes of glass bulbs and lamp caps:2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: GB/T 14196:2-2023 Safety specifications for incandescent lamps Part 2: Tungsten halogen lamps for general lighting in households and similar occasions (IEC 60432-2:2012, MOD) IEC 60061-1 Lampcaps, lampholders and gauges for testing their interchangeability and safety - Part 1: Lampcaps and Note: GB/T 1406 (all parts) Type and size of lamp holder (IEC 60061-1) IEC 60061-3 Lampcaps, lampholders and gauges for testing their interchangeability and safety - Part 3: Gauges (Lampcapsand Note: GB/T 1483 (all parts) Inspection gauge for lamp holders and lamp holders (IEC 60061-3) IEC 60061-4 Lamp caps, lampholders and test standards for interchangeability and safety - Part 4: Guidance and general information (Lamp Note: GB/T 21098-2022 Lamp caps, lamp holders and gauges for testing their safety and interchangeability Part 4: Guidelines and general information (IEC 60061-4: 2018,IDT) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14196.1-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 14196.1-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 14196.1-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14196.1-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 14196.1-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14196.1-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
