GB 12710-2024 English PDFUS$759.00 ยท In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 12710-2024: Safety specification for the coking plant Status: Valid GB 12710: Historical versions
Basic dataStandard ID: GB 12710-2024 (GB12710-2024)Description (Translated English): Safety specification for the coking plant Sector / Industry: National Standard Classification of Chinese Standard: C67 Classification of International Standard: 13.100 Word Count Estimation: 38,333 Date of Issue: 2024-12-31 Date of Implementation: 2025-07-01 Older Standard (superseded by this standard): GB 12710-2008 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB 12710-2024: Safety specification for the coking plant---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 13.100 CCSC67 National Standard of the People's Republic of China Replace GB 12710-2008 Coking safety regulations Released on 2024-12-31 2025-07-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 General Requirements 2 5 Factory site, factory area and buildings (structures) 3 6 Electrical facilities 7 7 Chemical Plant 11 8 Coal preparation 15 9 Coking 18 10 Gas purification 21 11 Crude Benzene Processing26 12 Tar processing 28 13 Public facilities29 14 Oil, acid and alkali loading and unloading and transportation 30 15 Maintenance 30 16 Verification Method 32 Reference 33ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB 12710-2008 "Coking Safety Regulations". Compared with GB 12710-2008, except for structural adjustments and editorial changes, In addition, the main technical changes are as follows. --- Changed the terms and definitions (see Chapter 3, Chapter 3 of the.2008 edition); --- Added fire hazard classification of main production units (equipment) of coking enterprises (see Table 2); --- Added the division of main outdoor explosion hazardous environment areas (see Table 4); --- Added requirements for the layout of the central control room (see 5.3.3, 6.1.4); --- Added partial load classification requirements for coking enterprises (see 6.1.14); --- Added safety requirements for recovery and treatment of volatile organic compounds (VOCs) (see 7.4); --- Added safety requirements for coal humidity control process (see 8.6); --- Added safety requirements for utilization of waste heat from coke oven flue gas, desulfurization and denitrification, and utilization of waste heat from riser pipes (see 9.1.45 and 9.1.46); --- Added safety requirements for coke oven pushing, coal loading and dust removal (see 9.1.47); --- Added safety requirements for anhydrous ammonia process (see 10.2.21~10.2.29); --- Deleted the requirements related to dry quenching (see 10.4.2 of the.2008 edition); --- Added the requirement to install hydrogen sulfide toxic gas detection and alarm devices in areas such as desulfurization vacuum pumps, acid incinerators and Claus furnaces (see 10.4.6, 10.4.7, 10.4.8); --- Added the content of Claus furnace process safety interlock (see 10.4.8); --- Added safety requirements for hydrogen production from coke oven gas, hydrogenation, distillation, and flare systems for crude benzene processing (see 11.2, 11.3, 11.4, and 11.5); --- Deleted the relevant requirements for pickling method (see 12.1 of the.2008 edition); --- Added safety requirements for circulating water and biological dephenolization systems (see 13.1, 13.2); --- Deleted the relevant requirements for methanol production from coke oven gas (see Chapter 14 of the.2008 edition); --- Added safety technical disclosure for maintenance work, operation approval, and safety requirements for temporary power supply for maintenance (see 15.1, 15.2, 15.13); --- Deleted the industrial hygiene chapter (see Chapter 17 of the.2008 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the Ministry of Emergency Management of the People's Republic of China. The previous versions of this document and the documents it replaces are as follows. --- First issued as GB 12710-1991 in.1991 and first revised in.2008; ---This is the second revision. Coking safety regulations1 ScopeThis document stipulates the overall requirements for safe production of coking enterprises, plant layout, buildings (structures), equipment and facilities, processes and maintenance, etc. Technical requirements. This document is applicable to the design of new construction, reconstruction and expansion projects of coking enterprises, as well as the production, inspection, maintenance and safety management of the enterprises.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB 2894 Safety signs and their use guidelines GB 4053 (all parts) Safety requirements for fixed steel ladders and platforms GB 4387 Safety regulations for railway and road transport within industrial enterprises GB 4962 Safety technical regulations for the use of hydrogen GB 6222 Gas Safety Regulations for Industrial Enterprises GB 7231 Basic identification colors, identification symbols and safety signs for industrial pipelines GB 12158 General Guidelines for Preventing Electrostatic Accidents GB 39800.1 Specification for personal protective equipment Part 1.General GB 39800.2 Specification for personal protective equipment Part 2.Petroleum, chemical, and natural gas GB 39800.3 Specification for personal protective equipment Part 3.Metallurgy, nonferrous metals GB 50016 Code for Fire Protection Design of Buildings GB 50057 Code for Lightning Protection Design of Buildings GB 50058 Design specification for electrical installations in explosive atmospheres GB 50160 Fire protection design standard for petrochemical enterprises GB 50177 Hydrogen Station Design Specification GB 50201 Flood Control Standard GB 50351 Specification for fire protection dike design in tank areas GB 50414 Fire protection design standard for iron and steel metallurgical enterprises GB 50489 Specification for general layout and transportation design of chemical enterprises GB 50603 Specification for general layout and transportation design of steel enterprises GB 51066 Safety technical specification for dry gas holders in industrial enterprises GB 55036 General specification for fire protection facilities GB 55037 General code for fire protection of buildings AQ7012 Safety Technical Specifications for Gas Drainers AQ7013 Safety regulations for dry coke quenching SH3009 Design specification for flammable gas exhaust system in petrochemical industry TSG11 Boiler Safety Technical Regulations ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 12710-2024_English be delivered?Answer: Upon your order, we will start to translate GB 12710-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 12710-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB 12710-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB 12710-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 12710-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
