GB/T 12691-2021 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12691-2021: Air compressor oils
Status: Valid

GB/T 12691: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 12691-2021	209	Add to Cart	3 days	Air compressor oils	Valid
GB 12691-1990	279	Add to Cart	3 days	[GB/T 12691-1990] Air compressor oils	Obsolete

Similar standards

GB 11121   GB/T 6538   GB 13895   GB 11122   

Basic data

Standard ID: GB/T 12691-2021 (GB/T12691-2021)
Description (Translated English): Air compressor oils
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: E34
Word Count Estimation: 10,194
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 12691-2021: Air compressor oils

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Air compressor oils ICS 75:100 CCSE34 National Standards of People's Republic of China Replacing GB/T 12691-1990, GB/T 5904-1986 air compressor oil Published on 2021-12-31 2022-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration

foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted: This document replaces GB/T 12691-1990 "Air Compressor Oil" and GB/T 5904-1986 "Light Load Oil Injection Rotary Air Compressor" Compared with GB/T 12691-1990 and GB/T 5904-1986, except for structural adjustments and editorial changes, the main The technical changes are as follows: a) Change the scope to read "This document specifies the product classification and marking of mineral oil, semi-synthetic and synthetic air compressor oils, Requirements and test methods, inspection rules and signs, packaging, storage and delivery, and acceptance of delivery: This document applies to reciprocating or dripping slew Air compressor oil, oil injection rotary air compressor oil (see Chapter 1, Chapter 1 of GB/T 12691-1990 and GB/T 5904- 1986 "scope"); b) Modified normative references (see Chapter 2, Chapter 2 of GB/T 12691-1990 and Chapter 1 of GB/T 5904-1986 chapter); c) add product classification (see 4:1); d) Two viscosity grades of L-DAA220 and L-DAB220 were added (see Table 1); e) Kinematic viscosity (40℃) and kinematic viscosity (100℃) increase test methods GB/T 30515 and NB/SH/T 0870 (see Table 1 and table 2); f) For L-DAA and L-DAB, the viscosity index item is added, and the indicator is reporting; the viscosity index is increased in the test method GB/T 1995, and use it as an arbitration method (see Tables 1 and 2); g) The technical requirements for L-DAA to increase demulsibility (the time for the emulsification layer to reach 3mL), and the L-DAB demulsibility item is changed from "Demulsibility (40-37-3)" was changed to "Demulsibility (time for emulsification layer to reach 3 mL)" (see Table 1); h) L-DAA adds liquid phase rust items, and the index is qualified (see Table 1); i) The test method for aging characteristics of L-DAA and L-DAB was changed from SH/T 0192 to GB/T 12709: L-DAB aging characteristics The value-added of carbon residue (200℃, Fe2O3) index is changed to not more than 2 (see Table 1, Table 1 of GB/T 12691-1990); j) Change the item of L-DAA and L-DAB neutralization value (without and after addition) to acid value, and add test method GB/T 7304 (See Table 1, Table 1 of GB/T 12691-1990); k) Added the detection method GB/T 17144 for carbon residue items (see Table 1 and Table 2); l) Added moisture detection method GB/T 11133 (see Table 1 and Table 2); m) L-DAA and L-DAB demulsibility, aging properties, residue properties after 80% distillation under reduced pressure, and moisture added Footnotes (see Table 1); n) L-DAG viscosity grades are only reserved for 32, 46 and 68 (see Table 2); o) L-DAG adds the item of kinematic viscosity at 100℃, which is required to be reported (see Table 2); p) The L-DAG foaming 24°C indicator was changed to 50mL/0mL, and the 93:5°C and post-24°C items were added, and the indicators were respectively 30mL/0mL and 50mL/0mL (see Table 2, Table 1 of GB/T 5904-1986); q) L-DAG has added a rotating oxygen bomb item, the index is reporting, and the test method is SH/T 0193 (see Table 2); r) L-DAG has added the item of acid value, the indicator is report, and the test method is GB/T 7304 and GB/T 4945 (see Table 2); s) L-DAG demulsibility, oxidation stability and moisture added footnotes (see Table 2); t) Added technical requirements for L-DAH and L-DAJ (see Table 2); u) Amend Chapter 5 "Sampling" of GB/T 12691-1990 and Chapter 4 "Sampling" of GB/T 5904-1986 to Chapter 6 "Inspection rules" (see Chapter 6, Chapter 5 of GB/T 12691-1990 and Chapter 4 of GB/T 5904-1986): Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed and managed by the National Standardization Technical Committee of Petroleum Products and Lubricants (SAC/TC280): This document is drafted by: China Petroleum & Chemical Corporation Petrochemical Research Institute, Sinopec Lubricant Co:, Ltd:, China PetroChina Co:, Ltd: Lubricant Branch: The main drafters of this document: Han Hongling, Zhu Xinyi, Chen Lin, Liu Zhonghua, Liu Qian, Kang Yin, Chen Xiaowei, Xiong Kai, Xu Shuyan, Wang Huiyu, Li Lin, Wang Hui: This document was first published in:1990, and this is the first revision, incorporating GB/T 5904-1986: air compressor oil Warning---If proper precautions are not taken, the products in this document may be dangerous during production, storage, transportation and use: risk: This document is not intended to advise on all safety issues related to this product: It is the user's responsibility to take appropriate safety and health measures and ensure compliance with the conditions stipulated by the relevant national laws and regulations:

1 Scope

This document specifies product classification and marking, requirements and test methods, inspection methods for mineral oil, semi-synthetic and synthetic air compressor oils Inspection rules and signs, packaging, storage, and delivery acceptance: This document applies to reciprocating or dripping rotary air compressor oils and oil-injected rotary air compressor oils:

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document: GB/T 259 Determination of water-soluble acids and bases of petroleum products GB/T 260 Determination of Water Content of Petroleum Products Distillation Method GB/T 265 Petroleum Products Kinematic Viscosity Determination Method and Dynamic Viscosity Calculation Method GB/T 268 Determination of carbon residues in petroleum products (Kang's method) GB/T 511 Determination of Mechanical Impurities in Petroleum and Petroleum Products and Additives GB/T 1995 Petroleum Products Viscosity Index Calculation Method GB/T 2433 Additive and additive-containing lubricating oil sulfate ash determination method GB/T 2541 Petroleum Products Viscosity Index Calculation Table GB/T 3141 ISO Viscosity Classification of Industrial Liquid Lubricants GB/T 3535 Determination of Pour Point of Petroleum Products GB/T 3536 Determination of flash point and fire point of petroleum products Cleveland open cup method GB/T 4756 Petroleum liquid manual sampling method GB/T 4945 Determination of acid value and base value of petroleum products and lubricants (color indicator method) GB/T 5096 Petroleum Products Copper Corrosion Test Method GB/T 7304 Determination of acid value of petroleum products by potentiometric titration GB/T 7305 Determination of Water Separability of Petroleum and Synthetic Liquids GB/T 7631:9 Classification of Lubricants, Industrial Oils and Related Products (Class L) Part 9: Group D (Compressors) GB/T 9168 Determination method of vacuum distillation of petroleum products GB/T 11133 Determination of Water Content in Petroleum Products, Lubricants and Additives Karl Fischer Coulometric Titration GB/T 11143 Anti-rust performance test method of mineral oil with inhibitor in the presence of water GB/T 12579 Determination method for foam characteristics of lubricating oil GB/T 12581 Determination of Oxidation Characteristics of Mineral Oil with Inhibitors GB/T 12709 Determination method for aging characteristics of lubricating oil (Kang's carbon residue method) GB/T 17144 Trace method for determination of carbon residues in petroleum products ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 12691-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 12691-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 12691-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 12691-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 12691-2021?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12691-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.