GB/T 6003.2-2024 PDF English
US$275.00 · In stock · Download in 9 secondsGB/T 6003.2-2024: Test sieves - Technical requirements and testing - Part 2: Test sieves of perforated metal plate Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 6003.2: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 6003.2-2024 | English | 275 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Test sieves - Technical requirements and testing - Part 2: Test sieves of perforated metal plate
| Valid |
| GB/T 6003.2-2012 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Test sieves -- Technical requirements and testing -- Part 2: Test sieves of metal wire cloth
| Valid |
| GB/T 6003.2-1997 | English | 399 |
Add to Cart
|
3 days
|
Test sieves of perforated metal plate
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 6003.2-2024
GB/T 6003.2-2024: Test sieves - Technical requirements and testing - Part 2: Test sieves of perforated metal plate
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT6003.2-2024
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 19.120
CCS A 28
GB/T 6003.2-2024 / ISO 3310-2.2013
Replacing GB/T 6003.2-2012
Test Sieves - Technical Requirements and Testing - Part 2.
Test Sieves of Perforated Metal Plate
(ISO 3310-2.2013, IDT)
Issued on. SEPTEMBER 29, 2024
Implemented on. APRIL 1, 2025
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3
Introduction... 5
1 Scope... 6
2 Normative References... 6
3 Terms and Definitions... 6
4 Marking... 6
5 Perforated Metal Plate... 7
5.1 Technical Requirements... 7
5.2 Test Methods... 11
5.3 Qualification Documents of Test Sieves... 13
6 Test Sieve Frame... 13
7 Labeling of Test Sieve... 14
Appendix A (informative) Record Card of Test Sieves... 16
Bibliography... 17
Foreword
This document was drafted in accordance with the rules provided in GB/T 1.1-2020 Directives
for Standardization - Part 1.Rules for the Structure and Drafting of Standardizing Documents.
This is Part 2 of GB/T 6003 Test Sieves - Technical Requirements and Testing. GB/T 6003 has
issued the following parts.
---Part 1.Test sieves of metal wire cloth;
---Part 2.Test sieves of perforated metal plate;
---Part 3.Test sieves of electroformed sheets.
This document serves as a replacement for GB/T 6003.2-2012 Test Sieves - Technical
Requirements and Testing - Part 2.Test Sieves of Metal Wire Cloth. In comparison with GB/T
6003.2-2012, apart from structural adjustments and editorial modifications, the main technical
changes are as follows.
---The requirements for the materials of the sieve plate and the blind hole area at the edge
of the sieve plate are modified (see 5.1.5; 5.1.4 of Version 2012);
---The accuracy requirements of the testing equipment are modified (see 5.2; 5.2.1 of
Version 2012);
---The basic size grouping range of the test sieve meshes is modified (see Table 3; Table 3
of Version 2012).
This document identically adopts ISO 3310-2.2013 Test Sieves - Technical Requirements and
Testing - Part 2.Test Sieves of Perforated Metal Plate.
This document makes the following minimal editorial modification.
---NOTE and EXAMPLE are added to Chapter 4.
This document was proposed by and shall be under the jurisdiction of National Technical
Committee on Particle Characterization and Sorting and Sieve of Standardization
Administration of China (SAC/TC 168).
The drafting organizations of this document. Xinxiang Bashan Aviation Materials Co., Ltd.;
Anhui Conch Kawasaki Engineering Co., Ltd.; Hangzhou Hezhi Standard Technology Service
Co., Ltd.; Xinxiang Xinhang Wire Mesh Filter Co., Ltd.; Yanqi Lake Institute of Basic
Manufacturing Technology Research Co., Ltd.
The main drafters of this document. Bai Qianyang, Wang Ning, Jin Zhou, Zhu Peiwu, Luan
Tian, Song Guojian, Jia Lijun, Hou Changge, Yan Ming, Cui Wei.
This document was first issued in 1985.It was published in parts during the first revision in
1997.This document corresponds to GB/T 6003.2 Test Sieves of Perforated Metal Plate. It was
revised for the second time in 2012.This is the third revision.
1 Scope
This document specifies the technical requirements and test methods for test sieves of
perforated metal plate.
2 Normative References
The contents of the following documents constitute indispensable clauses of this document
through the normative references in the text. In terms of references with a specified date, only
versions with a specified date are applicable to this document. In terms of references without a
specified date, the latest version (including all the modifications) is applicable to this document.
3 Terms and Definitions
The terms and definitions defined in ISO 2395 are applicable to this document.
4 Marking
The basic size and shape of the meshes of test sieves of perforated metal plate shall be indicated
in millimeters.
5 Perforated Metal Plate
The square or round meshes on the perforated metal plate shall be arranged in straight lines or
staggered lines, as shown in Figure 1.
Sieve plates with sieve meshes of 4 mm and above shall have unperforated edges and no
incomplete meshes are allowed, as shown in Figure 2.The mesh size, mesh spacing and
a In accordance with the provisions of ISO 565, the minimum basic size of the square mesh is 4 mm.
6 Test Sieve Frame
A circular sieve frame with a diameter of 200 mm should be selected.
When the sieve mesh size is greater than 25 mm and the amount of material to be sieved is large,
a larger sieve frame may be used.
7 Labeling of Test Sieve
The metal nameplate fixed onto the test sieve shall contain the following contents.
Appendix A
(informative)
Record Card of Test Sieves
An example of the record card of test sieves of perforated metal plate is shown in Table A.1.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 6003.2-2024 be delivered?Answer: The full copy PDF of English version of GB/T 6003.2-2024 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 6003.2-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6003.2-2024_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 6003.2-2024 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 6003.2-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6003.2-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 6003.2-2024?A step-by-step guide to download PDF of GB/T 6003.2-2024_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 6003.2-2024".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|