GB/T 39962-2021 PDF English
US$155.00 · In stock · Download in 9 secondsGB/T 39962-2021: Die casting machine - Energy efficiency limits and energy efficiency rating Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 39962-2021 | English | 155 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Die casting machine - Energy efficiency limits and energy efficiency rating
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 39962-2021
GB/T 39962-2021: Die casting machine - Energy efficiency limits and energy efficiency rating---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT39962-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 25.120.30
CCS J 61
Die casting machine - Energy efficiency limits and
energy efficiency rating
ISSUED ON: MARCH 09, 2021
IMPLEMENTED ON: OCTOBER 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Energy consumption test and calculation ... 6
5 Energy efficiency rating ... 11
6 Energy saving indicator ... 12
7 Labeling of energy efficiency grade ... 12
8 Parameter description ... 12
Die casting machine - Energy efficiency limits and
energy efficiency rating
1 Scope
This document specifies the terms and definitions, energy consumption test and
calculation, energy efficiency rating, energy saving indicator, labeling of energy
efficiency grade, and parameter description for energy efficiency limits and
energy efficiency rating of cold-chamber and hot-chamber die casting machines.
This document is applicable to the energy consumption determination and
energy efficiency rating of cold-chamber and hot-chamber die casting machines
(hereinafter referred to as "die casting machines").
2 Normative references
The contents of the following documents, through normative references in this
text, constitute indispensable provisions of this document. Among them, for
dated references, only the edition corresponding to that date applies to this
document. For undated references, the latest edition (including all amendments)
applies to this document.
GB 20906 Safety requirements for high pressure metal diecasting units
GB/T 21269 Cold chamber die casting machines
JB/T 6309.1 Hot chamber die casting machine - Part 1: Basic parameters
JB/T 6309.2 Hot-chamber diecasting machine - Part 2: Testing of the
accuracy
JB/T 6309.3 Hot-chamber diecasting machine - Part 3: Technical
requirements
3 Terms and definitions
The terms and definitions defined in GB/T 21269 and JB/T 6309.1 and the
following ones apply to this document.
3.1
3.5
Energy saving indicator
The die casting machine reaches the highest specific value of electrical energy
consumption allowed by energy saving products.
3.6
Injection time
The time required for the whole process from slow injection start to fast injection
and pressurization.
4 Energy consumption test and calculation
4.1 Test instrument
4.1.1 Clamping force tester: The accuracy of the test sensor shall not be less
than 0.5%.
4.1.2 Three-phase power tester/electric power analyzer/electrical energy
quality analyzer: The accuracy is not less than 2%.
4.2 Test requirements
4.2.1 The energy consumption test of die casting machine is carried out under
the conditions of air injection.
4.2.2 At the center of the moving and fixed die mounting plate, it shall install the
die backer. The material and dimension of the die backer of the hot-chamber
die casting machine shall meet the requirements in JB/T 6309.2. The dimension
of the die backer of the cold-chamber die casting machine shall be greater than
or equal to 0.8b × 0.8b (b is the inner size between the tie bars). The thickness
of the die backer shall be set according to the minimum thickness of the die-
casting die in GB/T 21269. And rags shall be filled at the feeding inlet of the die
backer. During the test, the safety of the die casting machine shall meet the
requirements of GB 20906. After debugging, the die casting machine is in a
stable working state. The technical requirements and performance of the cold-
chamber die casting machine shall meet the requirements in GB/T 21269. The
technical requirements and performance of the hot-chamber die casting
machine shall meet the requirements of JB/T 6309.2 and JB/T 6309.3.
4.2.3 The test parameters of the cold-chamber die casting machine shall meet
the requirements of Table 1. The empty cycle time shall meet the requirements
of Table 2.
4.2.6 The test shall include the energy consumption generated by the following
actions or components:
a) Main drive actions, including die-closing, die-opening, accumulator
charging, injection, injection return, ejection and ejection return of die
casting machines;
b) No-load ejection movement;
c) Electrical control devices;
d) Internal maintenance devices (provided by the manufacturer), such as
electrical component cooling system, lubrication system, hydraulic oil
cooling system;
e) For hot-chamber die casting machines, it also includes holding furnace,
nozzle heating and gooseneck heating, nozzle temperature and
gooseneck temperature settings:
1) For zinc alloy die-casting, it shall be set to 380 °C;
2) For magnesium alloy die-casting, it shall be set to 650 °C.
4.2.7 The oil temperature of the hydraulic system shall be between 30 °C and
55 °C.
4.2.8 The injection plunger tracking of the cold-chamber die casting machine
shall not be selected.
4.2.9 The nozzle action selection of the hot-chamber die casting machine shall
be fixed nozzle.
4.3 Test method
The test method is as follows:
a) Confirm the integrity of the prototype under test;
b) Reliably connect the three-phase power tester to the complete-machine
power inlet end of the die casting machine;
c) According to Table 1 and Table 2, set the parameters of the cold-chamber
die casting machine; complete the filling of Table 1. According to Table 3
and Table 4, set the parameters of the hot-chamber die casting machine;
complete the filling of Table 3;
d) After the prototype under test enters the state of continuous operation in
fully automatic mode, and after confirming that the prototype under test
reaches thermal equilibrium, start the energy consumption test;
e) For each test, the number of empty cycles shall meet the requirements of
4.2.5.
4.4 Data acquisition
After the energy consumption test is over, on the human-machine interface of
the three-phase power tester and the prototype under test respectively, the
following data shall be collected:
a) Total machine related electrical energy, E, in kilowatt-hours (kW · h);
b) Power factor of the total machine, ϕ;
c) Number of cycles, n, in cycles;
d) Time of one empty cycle of the prototype under test, t, in seconds (s).
4.5 Energy consumption calculation
4.5.1 The energy consumption per cycle, Ed, is calculated according to formula
(1):
Where:
Ed - Energy consumption per cycle, in kilowatt-hours per cycle (kW · h/cycle);
E - Total machine related electrical energy consumption, in kilowatt-hours
(kW · h);
n - Number of empty cycles, in cycles.
4.5.2 The specific value of electrical energy consumption, Eb, is calculated
according to formula (2):
Where:
Eb - Specific value of electrical energy consumption, in kilowatt-hours per
kilonewton cycle [kW · h/(kN · cycle)];
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 39962-2021 be delivered?Answer: The full copy PDF of English version of GB/T 39962-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 39962-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39962-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 39962-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 39962-2021?A step-by-step guide to download PDF of GB/T 39962-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 39962-2021".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|