GB/T 23384-2009 PDF English
US$150.00 · In stock · Download in 9 secondsGB/T 23384-2009: The recovery marking of products and components Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 23384-2009 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
The recovery marking of products and components
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 23384-2009
GB/T 23384-2009: The recovery marking of products and components---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT23384-2009
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.020.01
Z 00
The recovery marking of products and components
Issued on: APRIL 08, 2009
Implemented on: DECEMBER 01, 2009
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Recovery marking and requirements of product ... 6
5 Identification of composition and recovery marking of plastic compositions . 8
Appendix A (Normative) Pattern and size of marking ... 11
Foreword
Appendix A of this standard is a normative appendix.
This standard was proposed by the Department of Energy Conservation and
Comprehensive Utilization of the Ministry of Industry and Information
Technology, the Department of Resource Conservation and Environmental
Protection of the National Development and Reform Commission.
This standard shall be under the jurisdiction of the National Product Recycling
Foundation and Management Standardization Technical Committee.
Drafting organizations of this standard. China National Institute of
Standardization, China Electronics Technology Standardization Institute,
Beijing University of Technology, Peking University, China Household Electrical
Appliances Association Waste Electrical and Electronic Equipment Recycling
Branch, China Academy of Environmental Sciences, China Recovery
Resources Recycling Association, Renmin University of China, Haier Group,
Hisense Kelon Electric Co., Ltd., Guangdong Zhigao Air Conditioning Co., Ltd.,
Suzhou Samsung Electronics Co., Ltd., Henan Xinfei Electric Co., Ltd., Boxihua
Household Appliances Co., Ltd., Daikin Air Conditioning (Shanghai) Co., Ltd.,
Ningbo Aux Air Conditioning Co., Ltd., Philips (China) Investment Co., Ltd.,
Midea Group Washing Machine Manufacturing (Hefei) Co., Ltd., Wuxi Little
Swan Co., Ltd.
Drafters of this standard. Lin Ling, Li Aixian, Yang Meng, Li Hongqi, Wang
Xuejun, Han Shuoxiang, Liu Fuzhong, Zhou Zhongfan, Chen Miaonong, Fu
Hongjun, Le Min, Gao Dongfeng, Zhang Youliang, Yin Fengfu, Yan Zhiheng, Li
Wei, Gu Zhigang, Zhang Hongwei, Zhu Weizhong, Shi Jianchun, Zhu Jianjun,
Chen Gang, Wang Xiyu, Fan Shu, Gao Baohua.
The recovery marking of products and components
1 Scope
This standard specifies the technical requirements for the types of recovery
marking of products and components, the recovery marking and requirements
of products, the indication of composition of plastic components, the recycling
marking, etc.
This standard applies to producers and importers.
2 Normative references
The provisions in following documents become the provisions of this standard
through reference in this standard. For the dated references, the subsequent
amendments (excluding corrections) or revisions do not apply to this standard;
however, parties who reach an agreement based on this standard are
encouraged to study if the latest versions of these documents are applicable.
For undated references, the latest edition of the referenced document applies.
GB/T 1844.1 Plastics - Symbols and abbreviated terms - Part 1. Basic
polymers and their special characteristics
GB/T 1844.2 Plastic - Symbols and abbreviated terms - Part 2. Fillers and
reinforcing materials
GB/T 1844.3 Plastics - Symbols and abbreviated terms - Part 3. Plasticizers
GB/T 1844.4 Plastics - Symbols and abbreviated terms - Part 4. Flame
retardants
GB/T 16288 Marking of plastics products
GB/T 20861 Terminology of waste product recovery
SJ/T 11363 Requirements for concentration limits for certain hazardous
substances in electronic information products
3 Terms and definitions
The terms and definitions as defined in GB/T 20861 and the following terms
and definitions apply to this standard.
3.1
Hazardous substance
Substances contained in the product that are harmful to humans, animals,
plants and the environment, including lead (Pb), mercury (Hg), cadmium
(Cd), hexavalent chromium (Cr6+), polybrominated biphenyls (PBB),
polybrominated diphenyl ethers (PBDE) and so on.
3.2
Producer
A natural or legal person engaged in the production of products within the
territory of the People's Republic of China.
3.3
Importer
A natural or legal person engaged in the import of products within the territory
of the People's Republic of China.
3.4
Material
A substance or a mixture of substances, such as metals and alloys, plastics,
ceramics, rubber, and the like.
3.5
Homogeneous material
Materials with the same composition and which cannot be further separated
by mechanical means.
3.6
Component
A structural unit with a certain function or purpose in the product.
3.7
Environment-friendly use period
The period in which the use of the product, by the product user, which
contains hazardous substance that will not leak or be abrupt under the
of plastic compositions
5.1 Composition and recovery marking of plastic components
Identify the plastic composition used in the product and component for
reference by producers, consumers, recyclers, and processors.
5.2 Object of marking
Plastic parts which have a mass of not less than 25 g or a maximum surface
area of not less than (5 x 10) mm2 should all be marked.
5.3 Requirements of marking
The abbreviation code of plastic composition is executed in accordance with
GB/T 1844.1, GB/T 1844.2, GB/T 1844.3, GB/T 1844.4. The marking
requirements of plastic components are in accordance with GB/T 16288.
The recovery plastic components may use the marking pattern which combines
the graphics and the plastic composition codes, the example is as shown in
Figure 3.
Note. > PP + PET < indicates the composition of plastics
Figure 3 -- Identification of composition and recovery marking of plastic
compositions
5.4 Location of marking
5.4.1 Provide marking at the location of the component which is easy to view
after separated and disassembled, for example, the surface of the component,
the convex part where the unevenness changes greatly, try to avoid marking in
the concave part that is difficult to view.
5.4.2 Provide marking at the visible part which is not covered.
5.5 Special circumstances
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 23384-2009 be delivered?Answer: The full copy PDF of English version of GB/T 23384-2009 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 23384-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23384-2009_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 23384-2009 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 23384-2009?A step-by-step guide to download PDF of GB/T 23384-2009_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 23384-2009".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|