HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 15057.1-1994 PDF English

US$135.00 · In stock · Download in 9 seconds
GB/T 15057.1-1994: Limestone for chemical industry. Methods of sampling and preparing
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
GB/T 15057.1-1994English135 Add to Cart 0-9 seconds. Auto-delivery Limestone for chemical industry. Methods of sampling and preparing

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: GB/T 15057.1-1994
      

Similar standards

GB/T 5195.12   GB/T 1870   GB/T 1873   GB/T 35996   

GB/T 15057.1-1994: Limestone for chemical industry. Methods of sampling and preparing

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT15057.1-1994
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA UDC 549.51.661.543.06 D 51 GB/T 15057.1~15057.11-94 Chemical Analysis of Limestone for Chemical Industry [Part 1.Limestone for Chemical Industry – Methods of Sampling and Preparing] Issued on: MAY 5, 1994 Implemented on: FEBRUARY 1, 1995 Issued by. State Bureau of Quality and Technical Supervision

Table of Contents

1 Theme Content and Scope... 3 2 Normative References... 3 3 Sampling Method... 3 4 Preparation of Sample... 5 Additional Information... 6 Limestone for Chemical Industry – Methods of Sampling and Preparing 1 Subject Content and Scope This Standard specifies the sampling and sample preparation methods for limestone used in chemical industry. This Standard applies to the collection and preparation of limestone analysis specimens for chemical industry.

2 Normative References

GB/T 4650 Chemical products for industrial use – Sampling - Vocabulary GB/T 6678 General Principles for Sampling Chemical Products

3 Sampling Method

3.1 Sampling of mine pile The sampling point shall be no less than 0.3m from the top and from the bottom, and no less than 0.2m from the surface. The sample quantity at each point collected in the same batch shall be similar. 3.1.1 Ore of less than 1000t The sampling amount shall be no less than 2/100,000.The row spacing and point spacing shall be no greater than 2.5m, which shall be evenly distributed on the surface of the ore pile. Sample shall be taken at the intersection of row spacing and point spacing. 3.1.2 Ore of greater than 1000t The sampling amount shall be no less than 1/100,000.The row spacing and point spacing shall be no greater than 3.5m; and shall be evenly distributed on the surface of the ore pile. Sample shall be taken at the intersection of the row spacing and the point spacing. 3.2 Car and train sampling The sampling amount shall be no less than 2/100,000.The row spacing and point spacing shall be no greater than 1.5m, and shall be evenly distributed on the surface of the ore in the cabin. Sample shall be taken at the intersection of the row spacing and the point spacing. 3.3.2 Ship of greater than 1000t The sampling amount shall be no less than 1/100,000.The row spacing and point spacing shall be no greater than 2.0m, and shall be evenly distributed on the surface of the ore in the cabin. Sample shall be taken at the intersection of the row spacing and the point spacing. 3.4 Belt conveyor sampling Sample quantity taken from the same batch shall be similar. 3.4.1 Sampling is conducted once every hour; and the sampling amount is 2/100,000 of the throughput of the belt conveyor per hour. 3.4.2 The sampling position can be carried out at any section of the belt conveyor. Each time, 3-point samples are continuously and randomly taken from the cross-section of the belt conveyor. 3.4.3 For ores with a transportation volume of less than 4 h, the number of sampling times from the cross-section of the belt conveyor shall be no less than 6 times; and for ores with a transportation volume of less than 2 h, the number of sampling times shall be no less than 4 times.

4 Preparation of Sample

4.1 Mixing each sample in a batch constitutes the sample of that batch. 4.2 The mixed sample needs to undergo procedures such as smashing, crushing, and grinding. Each procedure shall be screened. Mix well and divide into quarters. Each reduction shall be carried out as follows. Where. Q - the minimum reliable mass of the reduced sample, in kg, d - maximum diameter of sample particles, in mm, K - uniformity coefficient of ore, limestone is 0.1. 4.3 After all the samples, prepared according to 4.2, pass through the 1mm sieve hole, reduce ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of GB/T 15057.1-1994 be delivered?

Answer: The full copy PDF of English version of GB/T 15057.1-1994 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 15057.1-1994_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 15057.1-1994_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- GB/T 15057.1-1994 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 15057.1-1994?

A step-by-step guide to download PDF of GB/T 15057.1-1994_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 15057.1-1994".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9