GB/T 1047-2019 PDF English
US$75.00 · In stock · Download in 9 secondsGB/T 1047-2019: Pipework components - Definition and selection of nominal size Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 1047: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 1047-2019 | English | 75 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Pipework components - Definition and selection of nominal size
| Valid |
| GB/T 1047-2005 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Pipework components -- Definition and selection of DN (nominal size)
| Obsolete |
| GB/T 1047-1995 | English | 199 |
Add to Cart
|
2 days
|
Nominal size for pipe components
| Obsolete |
| GB 1047-1970 | English | 199 |
Add to Cart
|
2 days
|
Nominal inside diameters for pipes and pipe line accessories
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 1047-2019
GB/T 1047-2019: Pipework components - Definition and selection of nominal size---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT1047-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 23.040.60
J 15
Replacing GB/T 1047-2005
Pipework components -
Definition and selection of nominal size
(ISO 6708:1995, Pipework components -
Definition and selection of DN (nominal size), NEQ)
ISSUED ON: MARCH 25, 2019
IMPLEMENTED ON: OCTOBER 1, 2019
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Terms and definitions ... 4
3 DN series and selection ... 4
Annex A (Informative) Correspondence between nominal size (DN) and
NPS ... 6
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 1047-2005, Pipework components – Definition and
selection of DN (nominal size). Compared with GB/T 1047-2005, in addition to editorial
changes, the major technical changes are as follows:
-- it adds nominal sizes DN 550, DN 650, DN 750, DN 850, DN 950, DN 1050, DN
1150, DN 1300, DN 1700, DN 1900, DN 2100, DN 2300, DN 2500, DN 2700, DN
2700 and DN 2900 (see 3.1; Clause 3 of 2005 edition);
-- it adds the correspondence between nominal size DN and NPS (see Annex A).
This Standard was redrafted by referencing to ISO 6708:1995, Pipework components
– Definition and selection of DN (nominal size). This standard was nonequivalent to
ISO 6708:1995.
This Standard was proposed by the China Machinery Industry Federation.
This Standard shall be under the jurisdiction of National Technical Committee 237 on
Pipeline Fittings of Standardization Administration of China (SAC/TC 237).
The drafting organizations of this Standard: China Productivity Center for Machinery,
Sinopec Engineering Incorporation, MCC Capital Engineering and Research
Incorporation Co., Ltd., China Sinogy Electric Engineering Co., Ltd., China Energy
Engineering Group Guangdong Electric Power Design Institute Co., Ltd., Chaoda
Valve Group Co., Ltd., China Institute of Marine Technology and Economy, Saint-
Gobain Pipework System Co., Ltd., East China University of Science and Technology.
The main drafters of this Standard: Li Junying, Feng, Zhao Yong, Wu Shiming, Lin
Qilve, Huang Tao, Qiu Xiaolai, Zhang Meiling, He Gen, Zhang Lanzhu.
The previous editions of the standard replaced by this Standard are as follows:
-- GB/T 1047-1970, GB/T 1047-1995, GB/T 1047-2005.
Pipework components -
Definition and selection of nominal size
1 Scope
This Standard gives the definition of DN (nominal size) of pipework components, and
specifies the nominal size series used for pipework components.
This Standard applies to pipework components which use the DN designation system.
2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
2.1
nominal size
An alphanumeric designation of size for components of a pipework system, which is
used for reference purposes. It comprises the letters DN followed by a dimensionless
whole number.
NOTE 1: This dimensionless number is directly related to the physical size, in millimetres, of
the bore or outside diameter of the end connections.
NOTE 2: The number following the letters DN does not represent a measurable value and
should not be used for calculation purposes except where specified in the relevant standard.
3 DN series and selection
3.1 The preferred DN values are as follows:
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 1047-2019 be delivered?Answer: The full copy PDF of English version of GB/T 1047-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 1047-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1047-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 1047-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 1047-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1047-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 1047-2019?A step-by-step guide to download PDF of GB/T 1047-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 1047-2019".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|