YS/T 1047.2-2015 (YS/T1047.2-2015, YST 1047.2-2015, YST1047.2-2015) & related versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
| YS/T 1047.2-2015 | English | 189 |
Add to Cart
|
3 days
|
Methods for chemical analysis of copper magnetite. Part 2: Determination of total iron content. Potassium dichromate titration methods
|
YS/T 1047.2-2015
| Valid |
YST 1047.2-2015
|
YS/T 1047.2-2015: PDF in English (YST 1047.2-2015)
YS/T 1047.2-2015
Methods for chemical analysis of copper magnetite - Part 2. Determination of total iron content-Potassium dichromate titration methods
ICS 73.060.10
D31
People's Republic of China Nonferrous Metals Industry Standard
Methods for chemical analysis of copper magnetite
Part 2. Determination of total iron content of potassium dichromate titration
Part 2. Determinationoftotalironcontent-
Issued on. 2015-04-30
2015-10-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
YS/T 1047-2015 "Methods for chemical analysis of copper magnetite" is divided into 11 sections.
--- Part 1. Determination of copper content of 2,2'-quinoline spectrophotometry and flame atomic absorption spectrometry;
--- Part 2. Determination of total iron content of dichromate method;
--- Part 3. Copper and iron - Determination of the amount of sodium thiosulfate titration;
--- Part 4. Determination of the amount of sulfur by high frequency combustion infrared absorption spectroscopy;
--- Part 5. Determination of phosphorus content titration;
--- Part 6. copper, total iron, silica, alumina, calcium oxide, magnesium oxide, titanium oxide, manganese and phosphorus contents - wave
Long-dispersive X-ray fluorescence spectrometry;
--- Part 7. copper, manganese, aluminum, calcium, magnesium, titanium and phosphorus content - Inductively coupled plasma atomic emission spectrometry;
--- Part 8. silicon dioxide content - Gravimetric method;
--- Part 9. Determination of metallic iron content of sulfonic acid spectrophotometry;
--- Part 10. Determination of the amount of ferrous oxide dichromate method;
--- Part 11. Determination of the amount of magnetic iron dichromate method.
This is Part 2.
This section drafted in accordance with GB/T 1.1-2009 given rules.
The non-ferrous metal part by the National Standardization Technical Committee (SAC/TC243) centralized.
This section is responsible for drafting unit. People's Republic of China Bayuquan Exit Inspection and Quarantine.
This section is drafted. Tianjin People's Republic of China Exit Inspection and Quarantine.
Participated in the drafting of this section. Baiyin Nonferrous Metals Group Co., People's Republic of China Bayuquan Entry-large
Nonferrous Metallurgical Design Research Ltd., Tongling Nonferrous Metals Group Holdings Co., Ltd. Lianyungang People's Republic of China Entry-Exit Inspection and Quarantine
Board Zhongtiaoshan Nonferrous Metals Group Co., Ltd., Beijing General Research Institute of Mining and Metallurgy, Dongying Fangyuan Nonferrous Metals Co., Ltd., Chinalco Luoyang Copper Co.,
the company.
Drafters of this section. Wang Hong, Gu Songhai, Xiao Kui, Lv Yanling Plasture Ho Mei, Fu Yuxia, Liu Yajun, Fan Lanju, Quine Lijun, Wu ink fountain,
Wang Kun, Chen Lan, ZHU Yu-xia.
Methods for chemical analysis of copper magnetite
Part 2. Determination of total iron content of potassium dichromate titration
1 Scope
YS/T 1047 This section specifies the method for determination of total iron content of magnetite copper.
This section applies to the determination of copper magnetite iron content in the whole measurement range (mass fraction) was 38.00% ~ 62.00%.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 6379.2 measurement methods and results of Accuracy (trueness and precision) - Part 2. Determine the standard measurement method to repeat
Of the basic methods of reproduction
Laboratory use specifications and test methods GB/T 6682 Analysis
GB/T 6730.3 chemical analysis of iron gravimetric method for the determination of hygroscopic moisture in analytical samples
GB/T 10322.1 iron ore sampling and sample preparation methods
GB/T 12805 Laboratory glassware Burettes
GB/T 12806 Laboratory glassware single marking flask
GB/T 12808 Laboratory glassware single marking pipette
3 Method summary
Sample to fusion with sodium peroxide, the leaching melt water and filtered, the precipitate is dissolved with hydrochloric acid, treated with a solution of hydrogen peroxide, ammonia separation
copper. The precipitate was dissolved with hydrochloric acid, with stannous chloride - titanium trichloride reduction of ferric iron, potassium dichromate solution oxidation excess reducing agent. Diphenylamine
Sulfonate as indicator, titrated with standard potassium dichromate solution of total iron content.
4 Reagents
Unless otherwise stated, use only in the analysis confirmed analytically pure reagents and in line with two water GB/T 6682 regulations.
4.1 sodium peroxide.
4.2 hydrochloric acid (ρ = 1.19g/mL).
4.3 sulfate (ρ = 1.84g/mL).
4.4 phosphoric acid (ρ = 1.69g/mL).
Aqueous ammonia 4.5 (ρ = 0.90g/mL).
4.6 Hydrogen peroxide (30%).
4.7 hydrochloride (11).
4.8 hydrochloride (110).
4.9 ammonia (595).
4.10 Sodium hydroxide solution (20g/L).
......
| Standard ID | YS/T 1047.2-2015 (YS/T1047.2-2015) | | Description (Translated English) | Methods for chemical analysis of copper magnetite. Part 2: Determination of total iron content. Potassium dichromate titration methods | | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | D31 | | Classification of International Standard | 73.060.10 | | Word Count Estimation | 8,865 | | Date of Issue | 2015-04-30 | | Date of Implementation | 2015-10-01 | | Quoted Standard | GB/T 6682; GB/T 6730.3; GB/T 10322.1; GB/T 12805; GB/T 12806; GB/T 12808; GB/T 6379.2 | | Drafting Organization | People Republic of China Bayuquan Entry - Exit Inspection and Quarantine Bureau | | Administrative Organization | National Standardization Technical Committee for Nonferrous Metals | | Regulation (derived from) | Ministry of Industry and Information Technology Announcement (2015 No. 28) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the method for determination of total iron in copper magnetite. This standard is applicable to the determination of total iron in copper magnetite, the range of determination (mass fraction) is 38.00% ~ 62.00%. |
|