YD/T 1592.1-2012 (YD/T1592.1-2012, YDT 1592.1-2012, YDT1592.1-2012) & related versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
| YD/T 1592.1-2012 | English | 145 |
Add to Cart
|
0-9 seconds. Auto delivery.
|
Technical specification and testing methods of electromagnetic compatibility for TD-SCDMA digital cellular moble communications system. Part 1: User equipment and ancillary equipment
|
YD/T 1592.1-2012
| Valid |
YDT 1592.1-2012
|
| YD/T 1592.1-2007 | English | 799 |
Add to Cart
|
5 days
|
Technical Specification and Testing Methods for Electromagnetic Compatibility for TD-SCDMA Digital Cellurla Mobile Communications System Part 1: User Equipment and Ancillary Equipment
|
YD/T 1592.1-2007
| Obsolete |
YDT 1592.1-2007
|
Buy with any currencies (Euro, JPY, KRW...): YD/T 1592.1-2012 Preview this PDF: YD/T 1592.1-2012
YD/T 1592.1-2012: PDF in English (YDT 1592.1-2012)
YD/T 1592.1-2012
YD
COMMUNICATION INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 01.040.33
M 04
Replacing YD/T 1592.1-2007
Technical specification and testing methods of
electromagnetic compatibility for TD-SCDMA digital
cellular mobile communication system – Part 1. User
equipment and ancillary equipment
ISSUED ON. DECEMBER 28, 2012
IMPLEMENTED ON. MARCH 01, 2013
Issued by. Ministry of Industry and Information Technology of People’s
Republic of China
Table of contents
Foreword ... 4
1 Scope ... 6
2 Normative references ... 6
3 Terms, definitions and abbreviations ... 7
3.1 Terms and definitions ... 7
3.2 Abbreviations ... 9
4 Test conditions ... 10
4.1 General conditions ... 10
4.2 Test arrangement ... 11
4.3 Test-exempted frequency band ... 12
4.4 Narrowband response of receiver ... 13
4.5 Continuous disturbance measurement conditions and arrangement ... 13
4.6 Immunity test conditions and arrangements ... 14
5 Performance evaluation method ... 17
5.1 General ... 17
5.2 EUT that can establish continuous communication connections ... 17
5.3 EUT that cannot establish continuous communication connections ... 18
5.4 Methods for evaluating ancillary equipment ... 18
5.5 Classification of EUT ... 18
6 Performance criteria ... 18
6.1 General ... 18
6.2 Performance criteria A (continuous phenomena) ... 18
6.3 Performance criteria B (transient phenomena) ... 19
6.4 Performance criteria C (intermittent phenomena) ... 19
7 Applicability ... 19
7.1 Disturbance measurement ... 19
7.2 Immunity test ... 20
8 Disturbance measurement methods and limits ... 21
8.1 Antenna port (conductive spurious) ... 21
8.2 Chassis port (radiation spurious) ... 21
8.3 Chassis ports for ancillary equipment ... 22
8.4 Telecommunications port ... 24
8.5 DC power input and output ports ... 24
8.6 AC power input and output ports ... 25
8.7 Harmonic current (AC power input port) ... 25
8.8 Voltage fluctuation and flicker (AC power input port) ... 25
8.9 Transient conductive disturbance (DC power input, output port) ... 26
9 Immunity test method and grade ... 26
9.1 Electrostatic discharge immunity test ... 26
9.2 Radiated disturbance immunity test (80MHz ~ 2.7GHz) ... 26
9.3 Electrical fast transient burst immunity test ... 27
9.4 Surge (impulse) immunity test ... 27
9.5 Conductive disturbance immunity test of RF field induction ... 28
9.6 Voltage dip, short interruptions and voltage variations immunity test ... 28
9.7 Power frequency magnetic field immunity test ... 30
9.8 Transient and surge immunity test (on-board environment) ... 30
Foreword
This part is Part 1 of the standard. Technical specification and testing methods
of electromagnetic compatibility for TD-SCDMA digital cellular mobile
communication system. This standard includes the following parts.
Part 1. User equipment and ancillary equipment
Part 2. Base stations and ancillary equipment
This part replaces YD/T 1592.1-2007 “Technical specification and testing
methods of electromagnetic compatibility for TD-SCDMA digital cellular mobile
communication system – Part 1. User equipment and ancillary equipment”.
As compared with YD/T 1592.1-2007, the main changes of this part are as
follows.
a) In the normative references, USE YD/T 1483 to replace ITU-R SM329,
USE GB/T 17626.29 to replace IEC 61000-4-29.
b) In chapter 5 of this part, CHANGE the version number of YD/T 1312 to
2008.
c) The maximum frequency of radiation disturbance test for ancillary
equipment is 6 GHz.
d) The maximum frequency of the radiation immunity test is 2.7GHz.
e) CHANGE the test level and performance criteria for voltage dip, short
interruption, and voltage variation immunity tests.
This part is established mainly referring to GB 9254 “Information technology
equipment – Radio disturbance characteristics – Limits and methods of
measurement”, GB/T 17626 series of standards, YD/T 1483 “Technical
requirement and measurement method of spurious emission of radio
equipment”, ETSI TS 134.124 “Universal mobile telecommunications system
(UMTS) – Electromagnetic compatibility (EMC) requirements for mobile
terminal and ancillary equipment”, and YD/T 1312.1 “Requirements and
measurement methods of electromagnetic compatibility for radio
communication equipment – Part 1. Common technical requirements”.
This part was proposed by AND shall be under the jurisdiction of the China
Communications Standardization Association.
The drafting organizations of this part. Ministry of Industry and Information
Technology Telecommunications Research Institute, ZTE Corporation, Huawei
Technologies Co., Ltd., Datang Telecom Technology Industry Group.
Technical specification and testing methods of
electromagnetic compatibility for TD-SCDMA digital
cellular mobile communication system – Part 1. User
equipment and ancillary equipment
1 Scope
This part specifies the electromagnetic compatibility (EMC) requirements for
user equipment and ancillary equipment for the 2GHz TD-SCDMA digital
cellular mobile communication system, including limits, performance criteria,
and measurement methods, etc.
This part is applicable to the user equipment and the ancillary equipment for
the 2GHz TD-SCDMA digital cellular mobile communication system.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this Standard.
GB/T 6113.104 Specification for radio disturbance and immunity measuring
apparatus and methods – Part 1-4. Radio disturbance and immunity
measuring apparatus – Ancillary equipment – Radiated disturbance
GB 9254 Information technology equipment – Radio disturbance
characteristics – Limits and methods of measurement
GB 17625.1 Electromagnetic compatibility – Limits – Limits for harmonic
current emissions (equipment input current ≤ 16A per phase)
GB 17625.2 Electromagnetic compatibility (EMC) – Limits – Limitation of
voltage changes, voltage fluctuations and flicker in public low-voltage supply
systems, for equipment with rated current limits ≤ 16A per phase and not
subject to conditional connection
GB/T 17626.2 Electromagnetic compatibility – Testing and measurement
techniques – Electrostatic discharge immunity test
GB/T 17626.3 Electromagnetic compatibility – Testing and measurement
techniques – Radio frequency electromagnetic field immunity test
GB/T 17626.4 Electromagnetic compatibility – Testing and measurement
techniques – Electrical fast transient/burst immunity test
GB/T 17626.5 Electromagnetic compatibility – Testing and measurement
techniques – Surge immunity test
GB/T 17626.6 Electromagnetic compatibility – Testing and measurement
techniques – Immunity to conducted disturbances induced by
radio-f...
......
| Standard ID | YD/T 1592.1-2012 (YD/T1592.1-2012) | | Description (Translated English) | Technical specification and testing methods of electromagnetic compatibility for TD-SCDMA digital cellular moble communications system. Part 1: User equipment and ancillary equipment | | Sector / Industry | Telecommunication Industry Standard (Recommended) | | Classification of Chinese Standard | M04 | | Classification of International Standard | 01.040.33 | | Word Count Estimation | 22,270 | | Older Standard (superseded by this standard) | YD/T 1592.1-2007 | | Quoted Standard | GB/T 6113.104; GB 9254; GB 17625.1; GB 17625.2; GB/T 17626.2; GB/T 17626.3; GB/T 17626.4; GB/T 17626.5; GB/T 17626.6; GB/T 17626.8; GBT 17626.11; GB/T 17626.29; GB/T 21437.2; YD/T 1312.1-2008; YD/T 1977; YD/T 1483; 3GPP TS 34.124 | | Drafting Organization | MIIT Telecommunications Research Institute | | Administrative Organization | China Communications Standards Association | | Regulation (derived from) | Ministry of Industry and Information Technology Bulletin 2012 No. 70; industry standard filing Notice 2013 No. 3 (total 159) | | Summary | This standard specifies the 2GHz TD-SCDMA digital cellular mobile communication system user equipment and auxiliary equipment, electromagnetic compatibility (EMC) requirements, including limits, performance criteria and measurement methods. This standard |
|