YB/T 4090-2015 (YB/T4090-2015, YBT 4090-2015, YBT4090-2015) & related versions
Buy with any currencies (Euro, JPY, KRW...): YB/T 4090-2015 Preview this PDF: YB/T 4090-2015
YB/T 4090-2015: PDF in English (YBT 4090-2015)
YB/T 4090-2015
YB
FERROUS METALLURGY INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 29.050
Q 51
Replacing YB/T 4090-2000
Ultra high power graphite electrode
ISSUED ON. JULY 14, 2015
IMPLEMENTED ON. JANUARY 01, 2016
Issued by. Ministry of Industry and Information Technology of PRC
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Shape, size and tolerance ... 5
4 Technical requirements ... 7
5 Test methods ... 8
6 Inspection rules ... 9
7 Packaging, marking, storage, transport and quality certificates ... 9
Appendix A (Informative) Current load of ultra high power graphite electrode 10
Ultra high power graphite electrode
1 Scope
This standard specifies the shape, dimensions and tolerances, technical
requirements, test methods, inspection rules, packaging, marking, storage,
transportation and quality certificates of ultra high-power graphite electrodes.
This standard is applicable to ultra high-power graphite electrodes made of
needle coke and coal tar pitch as main raw materials, formed by molding,
burning, impregnation, graphitization and mechanical processing, and used as
the conductive materials for electric furnace.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this standard.
GB/T 1427 Sampling method for carbon material
GB/T 1429 Carbon materials - Determination of the ash content
GB/T 3074.1 Method for the determination of the flexure strength of graphite
electrodes
GB/T 3074.2 Method for the determination of the elastic modulus of graphite
electrodes
GB/T 3074.4 Method for the determination of the coefficient of thermal
expansion of graphite electrodes
GB/T 8170 Rules of rounding off for numerical values & expression and
judgement of limiting values
GB/T 8719 General rule for packing, marking, storage, transport and quality
certificates of carbonaceous material and products
GB/T 24525 Carbon material resistivity determination method
GB/T 24528 Carbon materials - Determination method of the bulk density
provisions of GB/T 24528.
5.5 The thermal expansion factor is determined in accordance with the
provisions of GB/T 3074.4.
5.6 Determination of ash content is carried out in accordance with the provisions
of GB/T 1429.
5.7 The end surface clearance at the electrode joint is measured using a feeler
gauge.
6 Inspection rules
6.1 The quality inspection of the electrode shall be carried out by the supplier's
quality supervision and inspection department; the buyer may make
acceptance in accordance with the provisions of this standard.
6.2 Sampling method shall be carried out in accordance with GB/T 1427.
6.3 Batch of thermal expansion coefficient (CTE) and quantity to be sampled
per batch.
6.3.1 Electrodes and joints of the same type and specifications shall be
measured at least once a month.
6.3.2 Not less than 2 samples are determined every time.
6.4 The numerical rounding off is carried out in accordance with the provisions
of GB/T 8170.
7 Packaging, marking, storage, transport and quality
certificates
7.1 The finished electrode is marked with a safety line on the surface of the
electrode corresponding to the bottom of the joint.
7.2 The packaging, marking, storage, transport and quality certificates of
electrodes and joints shall be in accordance with GB/T 8719.
......
| Standard ID | YB/T 4090-2015 (YB/T4090-2015) | | Description (Translated English) | Ultra high power graphite electrode | | Sector / Industry | Ferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | Q51 | | Classification of International Standard | 29.05 | | Word Count Estimation | 7,748 | | Date of Issue | 2015-07-14 | | Date of Implementation | 2016-01-01 | | Older Standard (superseded by this standard) | YB/T 4090-2000 | | Quoted Standard | GB/T 1427; GB/T 1429; GB/T 3074.1; GB/T 3074.2; GB/T 3074.4; GB/T 8170; GB/T 8719; GB/T 24525; GB/T 24528 | | Drafting Organization | Jilin Carbon Co., Ltd | | Administrative Organization | National Steel Standardization Technical Committee | | Regulation (derived from) | PRC MIIT Announcement (2015 No.49) | | Summary | This Standard specifies the shape of the ultra-high-power graphite electrodes, the size and tolerance, technical requirements, test methods, inspection rules, packaging, labeling, storage, transport and quality certificates. This Standard applies to ultra-high-power graphite electrodes, needle coke and coal tar as the main raw material, molding, baking, impregnation, graphitization and machining made for EAF as the conductive material. |
|