YB/T 042-2014 (YB/T042-2014, YBT 042-2014, YBT042-2014) & related versions
Buy with any currencies (Euro, JPY, KRW...): YB/T 042-2014 Preview this PDF: YB/T 042-2014
YB/T 042-2014: PDF in English (YBT 042-2014)
YB/T 042-2014
YB
FERROUS METALLURGY INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 73.080
Q 52
Replacing YB/T 042-2004
Lime for metallurgical
ISSUED ON: MAY 06, 2014
IMPLEMENTED ON: OCTOBER 01, 2014
Issued by: Ministry of Industry and Information Technology of PRC
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Categories... 5
4 Technical requirements ... 5
5 Test method ... 6
6 Inspection rules ... 6
7 Transport, storage, quality certificate ... 7
Foreword
This standard was drafted in accordance with the requirements given in GB/T
1.1-2009.
This standard replaces YB/T 042-2004 "Lime for metallurgical". Compared with
YB/T 042-2004, the main technical changes are as follows:
- In clause 4.1, MODIFY the general grade of metallurgical lime, FROM
superior grade, first grade, second grade, third grade, fourth grade TO
superior grade, first grade, second grade, third grade;
- In clause 4.1, MAKE corresponding adjustments to the physical and
chemical indicators;
- In clause 4.2, MAKE corresponding adjustments to the product granularity;
- In Clause 6.1, MAKE corresponding adjustments to the inspection batch
size;
- In clause 6.2, MAKE corresponding adjustments to the sampling amount;
- In clause 7.1, MAKE corresponding adjustments to the product storage time.
This standard was proposed by the China Iron and Steel Industry Association.
This standard shall be under the jurisdiction of the National Steel
Standardization Technical Committee (TC 183).
Drafting organizations of this standard: Wuhan Iron and Steel (Group) Company,
Metallurgical Industry Information Standards Research Institute.
The main drafters of this standard: Mo Ying, Hu Bo, Wei Wenquan, Wan
Yuanyuan, You Daoming, Cai Jiming, Bai Hanfang, Qiu Jinhui, Wang Jiangwei.
This standard replaces the standard previously issued as follows:
- YB/T 042-1993, YB/T 042-2004.
Lime for metallurgical
1 Scope
This standard specifies the classification, technical requirements, test methods,
inspection rules, storage, transportation, quality certificates of metallurgical lime.
This standard applies to freshly burnt lime, which is used in the metallurgical
industry.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) is applicable to this standard.
GB/T 2007.1 General rules for the sampling and sample preparation of
minerals in bulk - Sampling by manual method
GB/T 2007.2 General rules for the sampling and sample preparation of
minerals in bulk - Manual method of sample preparation
GB/T 2007.7 General rules for the sampling and sample preparation of
minerals in bulk - The method for determination of size by manual sieving
GB/T 3286.1 Methods for chemical analysis of limestone and dolomite - Part
1: The determination of calcium oxide and magnesium oxide content - The
complexometric titration method and the flame atomic absorption
spectrometric method
GB/T 3286.2 Methods for chemical analysis of limestone and dolomite - Part
2: The determination of silicon dioxide content - The silicomolybdic blue
spectrophotometric method and the perchloric acid dehydration gravimetric
method
GB/T 3286.7 Methods for chemical analysis of limestone and dolomite - The
determination of sulphur content
GB/T 3286.8 Chemical analysis of limestone and dolomite - The
molybdenum blue photometric method for determination of phosphorus
GB/T 8170 Rules of rounding off for numerical values & expression and
6.2.1.1 Sampling amount
For continuous discharging production, take about 5 kg of sample every 2 h; for
intermittent discharging production, take about 5 kg of sample for each
discharging 5 kg of sample. Half of the 5 kg sample is sent for inspection; the
other half is used as backup sample.
6.2.1.2 Sampling method
Use a sampling machine, a sampling shovel or a shovel, to evenly intercept the
entire material flow. For every 5 kg sample taken, the number of interceptions
shall not be less than 4.
6.2.1.3 Sample storage
The container for storing the sample must be tightly closed, moisture-proof,
placed in a dry place.
6.2.2 Sample preparation
Combine the sample taken into a large sample. Crush it, to make it pass through
a 40 mm square-hole sieve. Prepare the sample, according to the relevant
provisions of GB/T 2007.2.
6.3 Judgment rules
6.3.1 The quality inspection of the product shall be carried out, by the technical
quality supervision department, which is jointly recognized by the supplier and
the buyer.
6.3.2 The physical and chemical indexes AND particle size indexes of the
samples taken shall meet the requirements in Table 1 and Table 2.
6.3.3 If there are unqualified items in the inspection results, re-inspect the
unqualified items, by the use of backup samples. If the result of the re-
inspection is qualified, the batch is judged to be qualified; otherwise, it is judged
to be unqualified.
7 Transport, storage, quality certificate
7.1 The storage time of product t generally does not exceed 3d. During storage
and transportation, it must be dry, rain-proof, moisture-proof. The carriage must
be cleaned before loading.
7.2 A quality certificate must be provided for each batch of exit-factory products,
which indicates the following:
......
| Standard ID | YB/T 042-2014 (YB/T042-2014) | | Description (Translated English) | Lime for metallurgical | | Sector / Industry | Ferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | Q52 | | Classification of International Standard | 73.080 | | Word Count Estimation | 6,659 | | Date of Issue | 2014/5/6 | | Date of Implementation | 2014/10/1 | | Older Standard (superseded by this standard) | YB/T 042-2004 | | Quoted Standard | GB/T 2007.1; GB/T 2007.2; GB/T 2007.7; GB/T 3286.1; GB/T 3286.2; GB/T 3286.7; GB/T 3286.8; GB/T 8170; YB/T 105 | | Drafting Organization | Wuhan Iron and Steel (Group) Corporation | | Administrative Organization | National Steel Standardization Technical Committee | | Regulation (derived from) | Ministry of Industry and Information Technology - Announcement 2014 No 32. | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This Standard specifies the classification of metallurgical lime, technical requirements, test methods, inspection rules, storage, transportation and quality certificates. This Standard applies to the metallurgical industry with a new burnt lime. |
|