QC/T 316-2017 (QC/T316-2017, QCT 316-2017, QCT316-2017) & related versions
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
QC/T 316-2017 | English | 150 |
Add to Cart
|
0-9 seconds. Auto delivery.
|
Automobile service brake fatigue strength bench test methods
|
QC/T 316-2017
| Valid |
QCT 316-2017
|
QC/T 316-1999 | English | 439 |
Add to Cart
|
3 days
|
Bench Test Methods of Fatigue Strength for Automobile Service Brake
|
QC/T 316-1999
| Obsolete |
QCT 316-1999
|
Buy with any currencies (Euro, JPY, KRW...): QC/T 316-2017 Preview this PDF: QC/T 316-2017
QC/T 316-2017
QC
AUTOMOBILE INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 43.040
T 24
Replacing QC/T 316-1999
Automobile service brake fatigue
strength bench test methods
ISSUED ON. JANUARY 9, 2017
IMPLEMENTED ON. JULY 1, 2017
Issued by. Ministry of Industry and Information Technology of the
People's Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 11
2 Symbols ... 11
3 Test related requirements ... 12
4 Test methods ... 13
Announcement
of Ministry of Industry and Information Technology of the
People's Republic of China
No.2, 2017
The Ministry of Industry and Information Technology approved 426 industry
standards (see the annex for standard references, names, main content and
dates of implementation) such as “Superconducting magnetic separator”
including 249 mechanical industry standards, 42 automotive industry standards,
10 pharmaceutical industry standards, 106 light industry standards, 4
metallurgical industry standards, 2 chemical industry standards, 7 electronic
industry standards, and 6 communications industry standards.
The above mechanical industry standards were published by the Machinery
Industry Press. Automotive industry standards were published by Science and
Technology Literature Publishing House. Pharmaceutical equipment industry
standards were published by China Planning Press. Light industry standards
were published by China Light Industry Press. Metallurgical industry standards
were published by Metallurgical Industry Press. Chemical industry standards
were published by Chemical Press. Electronic industry standards were
published by the Institute of Electronic Industry Standardization, Ministry of
Industry and Information Technology. Communication industry standards were
published by the People's Posts and Telecommunications Press.
Annex. References, names and dates of implementation of 42 automotive
industry standards.
Ministry of Industry and Information Technology of the People's Republic of
China
January 9, 2017
Annex.
References, names and dates of implementation of 42 automotive industry
standards
No. Standard reference Standard name
Standard
reference being
substituted
Date of
implementation
250 QC/T 776-2017 Motor caravan QC/T 776-2007 2017-07-01
251 QC/T 1051-2017 Coach car 2017-07-01
252 QC/T 1052-2017 Communication vehicle 2017-07-01
253 QC/T 1053-2017 Concrete spraying vehicle 2017-07-01
254 QC/T 1054-2017 Tunnel cleaning vehicle 2017-07-01
255 QC/T 1055-2017 Drainage and rescue vehicle 2017-07-01
256 QC/T 218-2017
Technical
specifications for
steering column
upper combined
switch of automobile
QC/T 218-1996 2017-07-01
257 QC/T 1056-2017
Technical
requirements and test
methods for
automotive dual
clutch automatic
transmission
assembly
2017-07-01
258 QC/T 245-2017
Technical
specifications for
isolated plant of
compressed-natural-
gas (CNG)
automobile
QC/T 245-2002 2017-07-01
259 QC/T 247-2017
Technical
specifications for
isolated plant of
liquefied petroleum
gas
QC/T 247-2002 2017-07-01
260 QC/T 1057-2017 Car snow chains 2017-07-01
261 QC/T 1058-2017 Car fingerprint identification device 2017-07-01
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009
“Directives for standardization - Part 1. Structure and drafting of standards”.
This Standard replaces QC/T 316-1999 “Bench Test Methods of Fatigue
Strength for Automobile Service Brake”. Compared with QC/T 316-1999, the
main changes in this Standard are as follows.
- modified the standard layout format so as to comply with GB/T 1.1 layout
requirements;
- listed the symbols involved in the standard separately (see Clause 2 of this
Edition);
- combined test equipment and test conditions into test related requirements
(see Clause 3 of this Edition, Clause 2 and Clause 3 of Edition 1999);
- added requirements for brake pressure increase and decrease rates (see
3.1.2 of this Edition);
- added brake torque calculation method for blue-axis plated passenger car
(see 3.2.2 of this Edition);
- added brake duration (see Figure 1 of this Edition, 3.5 of Edition 1999);
- added test cycle (see 4.2 of this Edition);
- added brake torque stabilization time (see Figure 1 of this Edition);
- deleted the chapter on test equipment and operation methods, and
combined related content into the test methods (see Clause 4 of this
Edition);
- deleted Annex A and Annex B.
This Standard was proposed by and shall be under the jurisdiction of National
Technical Committee on Automobile of Standardization Administration of China
(SAC/TC 114).
Main drafting organizations of this Standard. China First Automobile Co., Ltd.
Technology Center, Asia Pacific Mechanical and Electrical Group Co., Ltd.,
Longzhong Holding Group Co., Ltd.
Main drafters of this Standard. Lin Dahai, Hu Shuibing, Xiao Shuibo, Shi
Ruikang, Wang Shanghua.
Versions of standard substituted by this Standard are.
Automobile service brake fatigue
strength bench test methods
1 Scope
This Standard specifies test related requirements and test methods of
automobile service brake fatigue strength bench test.
This Standard is applicable to automobile service brake assembly.
2 Symbols
The following symbols apply to this Standard.
Ga. vehicle full load mass, in kilograms (kg).
Gf. front axle (shaft) full load mass, in kilograms (kg).
Gr. rear axle (shaft) full load mass, in kilograms (kg).
H. vehicle full load center of mass, in meters (m).
Jc. brake deceleration required by the test, in meters per square second (m/s2).
L - vehicle wheelbase, in meters (m).
Mf. brake torque calculation for a front brake in cattle/meter (N•m).
Mm. brake torque calculation for a middle axle brake, in cattle/meter (N•m).
Mr. brake torque calculation for a rear axle brake, in cattle/meter (N•m).
r. tire dynamic rolling radius, in meters (m).
β. front and rear brake force distribution ratio design value.
β1. design value of brake force distribution ratio between front axle and middle
axle of triaxial dumpling passenger car.
β2. design value of brake force distribution ratio between front axle and rear axle
of triaxial dumpling passenger car.
......
Standard ID | QC/T 316-2017 (QC/T316-2017) | Description (Translated English) | Automobile service brake fatigue strength bench test methods | Sector / Industry | Automobile & Vehicle Industry Standard (Recommended) | Classification of Chinese Standard | T24 | Word Count Estimation | 12,146 | Date of Issue | 2017-01-09 | Date of Implementation | 2017-07-01 | Older Standard (superseded by this standard) | QC/T 316-1999 | Regulation (derived from) | Ministry of Industry and Information Technology Announcement No.2 of 2017 | Summary | This standard specifies the test related requirements and test methods for the fatigue test of automotive service brakes. | Standard ID | QC/T 316-1999 (QC/T316-1999) | Description (Translated English) | Bench Test Methods of Fatigue Strength for Automobile Service Brake | Sector / Industry | Automobile & Vehicle Industry Standard (Recommended) | Classification of Chinese Standard | T24 | Word Count Estimation | 11,153 | Date of Issue | 1999/8/9 | Date of Implementation | 2000/1/1 | Older Standard (superseded by this standard) | ZB T24013-1990 | Adopted Standard | JASO C441-77, MOD | Drafting Organization | Tianjin Automobile Research Institute | Administrative Organization | National Automotive Standardization Technical Committee | Regulation (derived from) | Ministry of Industry and Information Technology Announcement No. 2 of 2017 | Summary | This standard specifies the test method for automotive service brake fatigue strength. This standard applies to automotive service brakes. |
|