QC/T 3-2017 (QC/T3-2017, QCT 3-2017, QCT3-2017) & related versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
| QC/T 3-2017 | English | 180 |
Add to Cart
|
0-9 seconds. Auto delivery.
|
Completeness of automotive product drawing and design document
|
QC/T 3-2017
| Valid |
QCT 3-2017
|
| QC/T 3-1992 | English | 399 |
Add to Cart
|
3 days
|
Completeness of drawings and design documents about automobiles
|
QC/T 3-1992
| Obsolete |
QCT 3-1992
|
Buy with any currencies (Euro, JPY, KRW...): QC/T 3-2017 Preview this PDF: QC/T 3-2017
QC/T 3-2017: PDF in English (QCT 3-2017)
QC/T 3-2017
AUTOMOBILE INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 43.020
T 04
Replacing QC/T 3-1992
Completeness of Automotive
Product Drawing and Design Document
ISSUED ON: JANUARY 09, 2017
IMPLEMENTED ON: JULY 01, 2017
Issued by: Ministry of Industry and Information Technology of PRC
Table of Contents
Announcement ... 3
Foreword ... 9
1 Scope ... 10
2 Normative References ... 10
3 Terms and Definitions ... 10
4 General Requirements ... 10
5 Main Contents of Design Document ... 11
Appendix A (Normative) Completeness of Drawing and Document ... 17
262 QC/T 1059-2017
Automobile cab
torsion bar type flip
and lock mechanism
2017-07-01
263 QC/T 32-2017
Test methods of air
cleaners for
automobiles
QC/T 32-2006 2017-07-01
264 QC/T 597.1-2017
Threaded fasteners -
Pre - coated adhesive
- Technical
requirements - Part 1:
Microcapsule locking
layer
QC/T 597-2017 2017-07-01
265 QC/T 597.2-2017
Threaded fasteners -
Pre - coated adhesive
- Technical
requirements - Part 2:
Polyamide locking
layers
2017-07-01
266 QC/T 1-2017
Basic requirements
for automobile
products drawing
QC/T 1-1992 2017-07-01
267 QC/T 2-2017 Drawing format of automobiles QC/T 2-1992 2017-07-01
268 QC/T 3-2017
Completeness of
drawings and design
documents about
automobiles
QC/T 3-1992 2017-07-01
269 QC/T 4-2017
Method for change
about product
drawing and design
document regulations
of automobile
QC/T 4-1992 2017-07-01
270 QC/T 5-2017
Standardization
examination for
automobile product
drawings and design
documents
QC/T 5-1992 2017-07-01
271 QC/T 18-2017
Automobile products
drawing and design
documents - Terms
QC/T 18-1992 2017-07-01
272 QC/T 340-2017
Hexagon flange
bearing surface with
tooth bolt
QC/T 340-1999 2017-07-01
283 QC/T 1067.1-2017
Road Vehicles -
Connections for On-
board Electrical
Wiring Harnesses -
Part 1: Definitions,
Test Methods and
General Performance
Requirements (the
Automobile Part)
QC/T 417.1-
2001 2017-07-01
284 QC/T 1067.2-2017
Automotive
connectors for
electrical harnesses
and electrical
equipment - Part 2:
Types and
dimensions of plug
terminals
QC/T 417.3-
2001
QC/T 417.4-
2001
QC/T 417.5-
2001
2017-07-01
285 QC/T 1067.3-2017
Automotive
connectors for
electrical harnesses
and electrical
equipment - Part 3:
Wire connector type,
size and special
requirements
QCn 29010-
1991
QCn 29011-
1991
QCn 29013-
1991
2017-07-01
286 QC/T 1068-2017
Asynchronous drive
motor system for
electric vehicles
2017-07-01
287 QC/T 1069-2017
Permanent magnet
synchronous drive
motor system for
electric vehicles
2017-07-01
288 QC/T 1070-2017
Technical
specifications of
automobile parts
remanufactured
products
2017-07-01
289 QC/T 1071-2017
Test method for
steady state flow
characteristics of
automotive engine
cylinder head airways
2017-07-01
Completeness of Automotive
Product Drawing and Design Document
1 Scope
This Standard specifies the completeness and main contents of automotive product
drawing and design document.
This Standard is applicable to the new product design and old product improvement of
automobile.
2 Normative References
GB/T 1.1 Directives for Standardization – Part 1: Structure and Drafting of
Standards
GB/T 9969 General Principles for Preparation of Instructions for Use of Industrial
Products
GB/T 20001.10 Rules for Drafting Standards - Part 10: Product Standard
QC/T 1 Basic Requirements for Automobile Products Drawing
QC/T 6 Compiling Rules for Automobile Production Schedule
QC/T 18 Terminology for Automotive Product Drawing and Design Document
3 Terms and Definitions
For the purpose of this standard, the terms and definitions given in QC/T 18 apply.
4 General Requirements
4.1 Each stage of the product from design development to start of regular production
shall have corresponding product drawing and design document.
4.2 The completeness of product drawing and design document can refer to Appendix
A.
c) Product model, name and main use functions;
d) Propose relevant suggestions on modification and improvement of the design
program and technical agreement;
e) Feasibility analysis: market forecast, enterprise technology and development and
production capabilities, new product design guidelines, estimated production
outline and target cost, technical and economic analysis;
f) Basic structure mode of the product. The whole vehicle shall include the
description of assembly layout scheme, configuration status, design
requirements of each system, and main technical parameters;
g) Design quality and reliability indicators;
h) Technical standards, technical and economic indicators that are implemented;
i) Comparison and analysis of technical level of similar products at home and abroad,
and adoption of new technologies and structures;
j) Comprehensive requirements for standardization and regulations;
k) Key technical solution and analysis of key parts/components, special materials
and sources of supply;
l) Describe the situation where the product not only meets the needs of users but
also meets the development requirements of company;
m) Product development schedule, cycle estimation for new product design, trial
production, and test.
5.4 Design instruction
The design instruction mainly includes:
a) Design basis;
b) Describe the achievement and change of the target parameters, performance
indicators, structures, principles, etc. determined in the design program;
c) Conclusion.
5.5 Calculation and simulation analysis report
The Calculation and simulation analysis report mainly includes:
a) Calculation purpose;
The test outline mainly includes:
a) Names of test items;
b) Test basis;
c) Test purpose and requirements;
d) Test contents;
e) Test conditions (environmental conditions, test equipment, test instruments, etc.);
f) Test methods, procedures, corresponding record forms;
g) Test precautions;
h) Funding estimation;
i) Test schedule.
5.9 Test report
The test report mainly includes:
a) Test items and task sources;
b) Test basis;
c) Test purpose and requirements;
d) Test plan;
e) Test start and completion date and site;
f) Test conditions (environmental conditions, test devices, test instruments, etc.);
g) Test data;
h) Characteristic curve;
i) Failure statistics;
j) Problems occurred during the test process, and the analysis and treatment;
k) Test conclusions and suggestions;
l) Test organization, test staff, and formulation time.
5.10 Product drawing
5.15 Summary of trial production
The summary of trial production mainly includes:
a) Nature of trial-produced products (referring to series, variants, special use, etc.);
b) Trial production time, quantity;
c) Key issues, solutions, and solving processes;
d) Verification of product drawing, and design document;
e) Material substitution;
f) Quality of processing and assembling;
g) Trial production conclusion.
5.16 Trial-use report
The trial-use report mainly includes:
a) Model, name and number of trial-use product;
b) Trial-use items;
c) Trial-use purpose and requirements;
d) Trial-use conditions;
e) Trial-use procedures, methods and contents;
f) Performance analysis;
g) Trial-use conclusion;
h) Trial-use organization (stamp) and date.
5.17 Product standard
It shall be implemented as per standards of GB/T 20001.10.
5.18 Instruction manual
It shall be implemented as per standards of GB/T 9969.
......
| Standard ID | QC/T 3-2017 (QC/T3-2017) | | Description (Translated English) | Completeness of automotive product drawing and design document | | Sector / Industry | Automobile & Vehicle Industry Standard (Recommended) | | Classification of Chinese Standard | T04 | | Word Count Estimation | 16,182 | | Date of Issue | 2017-01-09 | | Date of Implementation | 2017-07-01 | | Older Standard (superseded by this standard) | QC/T 3-1992 | | Regulation (derived from) | Ministry of Industry and Information Technology Announcement No.2 of 2017 | | Summary | This standard specifies the integrity and main content of automotive product drawings and design documents. |
|