QC/T 1067.3-2017 (QC/T1067.3-2017, QCT 1067.3-2017, QCT1067.3-2017) & related versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
| QC/T 1067.3-2017 | English | 145 |
Add to Cart
|
0-9 seconds. Auto delivery.
|
Connector used automobile wire harness and electrical device -- Part 3: Type, dimension and special requirement of the ring terminal
|
QC/T 1067.3-2017
| Valid |
QCT 1067.3-2017
|
Buy with any currencies (Euro, JPY, KRW...): QC/T 1067.3-2017 Preview this PDF: QC/T 1067.3-2017
QC/T 1067.3-2017: PDF in English (QCT 1067.3-2017)
QC/T 1067.3-2017
AUTOMOBILE INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 43.040.10
T 36
Replacing QCn 29010-1991, QCn 29011-1991, QCn 29013-1991
Connector used in automobile wire harness and
electrical device - Part 3: Type, dimension and special
requirement of the ring terminal
ISSUED ON: JANUARY 09, 2017
IMPLEMENTED ON: JULY 01, 2017
Issued by: Ministry of Industry and Information Technology of PRC
Table of Contents
Announcement ... 3
Foreword ... 9
1 Scope ... 11
2 Normative references ... 11
3 Type and size ... 11
4 Special requirements ... 17
Annex:
References, names and dates of implementation of 42 automotive industry
standards
No. Standard reference Standard name
Standard
reference being
substituted
Date of
implementation
250 QC/T 776-2017 Motor caravan QC/T 776-2007 2017-07-01
251 QC/T 1051-2017 Coach car 2017-07-01
252 QC/T 1052-2017 Communication vehicle 2017-07-01
253 QC/T 1053-2017 Concrete spraying vehicle 2017-07-01
254 QC/T 1054-2017 Tunnel cleaning vehicle 2017-07-01
255 QC/T 1055-2017 Drainage and rescue vehicle 2017-07-01
256 QC/T 218-2017
Technical
specifications for
steering column
upper combined
switch of automobile
QC/T 218-1996 2017-07-01
257 QC/T 1056-2017
Technical
requirements and test
methods for
automotive dual
clutch automatic
transmission
assembly
2017-07-01
258 QC/T 245-2017
Technical
specifications for
isolated plant of
compressed-natural-
gas (CNG)
automobile
QC/T 245-2002 2017-07-01
259 QC/T 247-2017
Technical
specifications for
isolated plant of
liquefied petroleum
gas
QC/T 247-2002 2017-07-01
260 QC/T 1057-2017 Car snow chains 2017-07-01
261 QC/T 1058-2017 Car fingerprint identification device 2017-07-01
273 QC/T 1060-2017
Automotive
hexagonal flower
flange bolts
2017-07-01
274 QC/T 1061-2017
Road transport
lightweight fuel tank
vehicle anti-overflow
system
2017-07-01
275 QC/T 1062-2017
Road transport
lightweight fuel tank
vehicle unloading
valve
2017-07-01
276 QC/T 1063-2017
Road transport
lightweight fuel tank
vehicle oil and gas
recovery components
2017-07-01
277 QC/T 1064-2017
Road transport
flammable liquid
dangerous goods
tank vehicle -
breathing valve
2017-07-01
278 QC/T 1065-2017
Road transport
flammable liquid
dangerous goods
tank vehicle -
manhole cover
2017-07-01
279 QC/T 789-2017
Performance
requirements and
bench test methods
of automobile electric
vortex retarder
assembly
QC/T 789-2007 2017-07-01
280 QC/T 316-2017
Bench test methods
of fatigue strength for
automobile service
brake
QC/T 316-1999 2017-07-01
281 QC/T 201-2017
Nylon pipe joint size
for automobile air
brake
QC/T 201-1995 2017-07-01
282 QC/T 1066-2017
Performance
requirements of cable
assembly for vehicle
parking brakes and
bench test method
2017-07-01
283 QC/T 1067.1-2017
Road Vehicles -
Connections for On-
board Electrical
Wiring Harnesses -
Part 1: Definitions,
Test Methods and
General Performance
Requirements (the
Automobile Part)
QC/T 417.1-
2001 2017-07-01
284 QC/T 1067.2-2017
Automotive
connectors for
electrical harnesses
and electrical
equipment - Part 2:
Types and
dimensions of plug
terminals
QC/T 417.3-
2001
QC/T 417.4-
2001
QC/T 417.5-
2001
2017-07-01
285 QC/T 1067.3-2017
Automotive
connectors for
electrical harnesses
and electrical
equipment - Part 3:
Wire connector type,
size and special
requirements
QCn 29010-
1991
QCn 29011-
1991
QCn 29013-
1991
2017-07-01
286 QC/T 1068-2017
Asynchronous drive
motor system for
electric vehicles
2017-07-01
287 QC/T 1069-2017
Permanent magnet
synchronous drive
motor system for
electric vehicles
2017-07-01
288 QC/T 1070-2017
Technical
specifications of
automobile parts
remanufactured
products
2017-07-01
289 QC/T 1071-2017
Test method for
steady state flow
characteristics of
automotive engine
cylinder head airways
2017-07-01
Connector used in automobile wire harness and
electrical device - Part 3: Type, dimension and special
requirement of the ring terminal
1 Scope
This standard specifies the type, size and special requirements of automotive
wire connectors.
This standard applies to low-voltage wire connectors, ignition wire connectors,
battery wire connectors in automotive wiring harnesses and electrical
equipment.
2 Normative references
The following documents are indispensable for the application of this standard.
For dated references, only dated versions apply to this standard. For undated
references, the latest edition (including all amendments) applies to this
standard.
GB/T 35 Square head bolts with small head
GB/T 1804-2000 General tolerances - Tolerances for linear and angular
dimensions without individual tolerance indications
GB/T 2040 Sheet of copper and copper alloy
GB/T 2059 Strips of copper and copper alloys
QC/T 625 Metallic coatings and conversion coatings for automobiles
YB/T 5058 Cold-rolled spring and tool steel strips
3 Type and size
3.1 General
The sizes as shown in the drawings and tables of this standard whose
tolerances are not indicated are in accordance with the grade-M in GB/T 1804-
2000.
......
| Standard ID | QC/T 1067.3-2017 (QC/T1067.3-2017) | | Description (Translated English) | Connector used automobile wire harness and electrical device -- Part 3: Type, dimension and special requirement of the ring terminal | | Sector / Industry | Automobile & Vehicle Industry Standard (Recommended) | | Classification of Chinese Standard | T36 | | Word Count Estimation | 16,176 | | Date of Issue | 2017-01-09 | | Date of Implementation | 2017-07-01 | | Older Standard (superseded by this standard) | QCn 29010-1991; QCn 29011-1991; QCn 29013-1991 | | Regulation (derived from) | Ministry of Industry and Information Technology Announcement No.2 of 2017 | | Summary | This standard specifies the type, size and special requirements of automotive wire connectors. |
|