QC/T 1000.1-2015 (QC/T1000.1-2015, QCT 1000.1-2015, QCT1000.1-2015) & related versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
| QC/T 1000.1-2015 | English | 150 |
Add to Cart
|
0-9 seconds. Auto delivery.
|
Performance requirements and test methods of non-woven on automotive filter. Part 1: Non-woven of filters for passenger compartment
|
QC/T 1000.1-2015
| Valid |
QCT 1000.1-2015
|
Buy with any currencies (Euro, JPY, KRW...): QC/T 1000.1-2015 Preview this PDF: QC/T 1000.1-2015
QC/T 1000.1-2015: PDF in English (QCT 1000.1-2015)
QC/T 1000.1-2015
QC
AUTOMOTIVE INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 43.020
T 05
Performance requirements and test methods of no-
woven on automotive filter – Part 1. Non-woven of
filters for passenger compartment
ISSUED ON. APRIL 30, 2015
IMPLEMENTED ON. OCTOBER 1, 2015
Issued by. Ministry of Industry and Information Technology of the
People’s Republic of China
Table of Contents
Announcement of Ministry of Industry and Information Technology of the
People's Republic of China ... 3
Foreword ... 7
1 Scope ... 8
2 Normative references ... 8
3 Terms and definitions ... 9
4 Requirements... 10
5 Test methods ... 11
6 Inspection rules ... 12
7 Packing, transportation and storage ... 13
Annex.
Numbers, standard names and initial implementation dates of 17
automotive industry standards
No. Standard number Standard name Standard number being substituted
Initial
implementation date
(YYYY-MM-DD)
287 QC/T 991-2015
Passenger cars - Light
alloy wheels - 90°
impact test procedure
2015-10-01
288 QC/T 717-2015
Road vehicle – Wheels
- Requirements and
Measuring methods of
radial and lateral run-
out
QC/T 717-2004
ISO 16833.2006,
MOD
2015-10-01
289 QC/T 52-2015 Refuse collection vehicle QC/T 52-2000 2015-10-01
290 QC/T 652-2015 Suction-type sewer scavenger QC/T 652-2000 2015-10-01
291 QC/T 992-2015 Municipal emergency service vehicle 2015-10-01
292 QC/T 993-2015 Explosive transport vehicle 2015-10-01
293 QC/T 994-2015 Demountable tanker carrier 2015-10-01
294 QC/T 995-2015 Hydrostatic drive modular transporter 2015-10-01
295 QC/T 764-2015
Road vehicles -
Hydraulic braking
system - Simple flare
pipes, tube tapped
holes male fittings and
hose end fittings
QC/T 764-2006 2015-10-01
296 QC/T 239-2015
Specifications and
bench test methods for
commercial vehicle
service brake
QC/T 239-1997
QC/T 479-1999 2015-10-01
297 QC/T 996-2015
Specifications and
bench test methods of
automobile air dryer
2015-10-01
298 QC/T 997-2015
Passenger car full load
overall frame body
structure requirements
2015-10-01
Performance requirements and test methods of no-
woven on automotive filter – Part 1. Non-woven of
filters for passenger compartment
1 Scope
This Part specifies the classification, requirements, test methods, inspection rules,
marking, packing, transportation and storage of non-woven of filters for passenger
compartment (hereinafter referred to as non-woven).
This Part applies to non-woven of filter for passenger compartment.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced documents (including all
amendments) applies to this document.
GB 6529, Textiles – Standard atmospheres for conditioning and testing
GB 8410, Flammability of automotive interior materials
GB 18401, National general safety technical code for textile products
GB/T 2912.1, Textiles – Determination of formaldehyde – Part 1. Free and
hydrolized formaldehyde (Water extraction method)
GB/T 2828.1, Sampling procedures for inspection by attributes – Part 1. Sampling
schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 5453, Textiles – Determination of the permeability of fabrics to air
GB/T 7573, Textiles – Determination of pH of aqueous extract
GB/T 17592, Textiles – Test method of the use of banned azo colourants
GB/T 22364, Paper and board - Determination of resistance to bending
GB/T 23344, Textiles – Determination of 4-aminoazobenzene
mass per unit area
GB/T 24218.2, Textiles - Test methods for nonwovens – Part 2. Determination of
thickness
GB/T 24218.3, Textiles – Test methods for nonwovens – Part 3. Determination of
tensile strength and elongation (strip method)
QC/T 795.1-2007, Road vehicles – Air filters for passenger compartment – Part 1.
Test for particulate filtration
QC/T 795.2-2007, Road vehicles – Air filters for passenger compartment – Part 2.
Test for gaseous filtration
HJ/T 324, Specifications for environmental protection product – Fabric for bag
house
3 Terms and definitions
For the purposes of this document, the following terms and definitions, and those
defined in QC/T 795.1 and QC/T 795.2, apply.
3.1
ordinary filter media
non-woven filter media which are used for air conditioner filter for passenger
compartment with a filter efficiency less than 70%
3.2
3.3
activated carbon filter media
non-woven filter media which are used for air conditioner filter for passenger
compartment and contain activated carbon
3.4
tolerance of grammage
ΔG – tolerance of grammage, %;
M – actually measured grammage, g/m2;
m – nominal grammage, g/m2.
5.4 Tolerance of thickness
5.4.1 Determine thickness as specified in GB/T 24218.2.
5.4.2 Calculation result.
where.
Δδ – tolerance of thickness, %;
H – actually measured thickness, mm;
h – nominal thickness, mm.
5.5 Tensile strength is as specified in GB/T 24218.3.
5.6 Permeability to air is as specified in GB/T 5453.
5.7 Stiffness is as specified in GB/T 22364.
5.11 Fire resistance is as specified in GB 8410.
5.12 Determination of pH is as specified in GB 7573.
5.13 Sensory odours are as specified in GB 18401.
5.14 Determination of formaldehyde is as specified in GB/T 2912.1.
5.15 Determination of resoluble carcinogenic aromatic amine dyestuffs is as specified
in GB/T 17592 and GB/T 23344.
6 Inspection rules
6.1 The quantity of one delivery is a batch, but each batch shall not be more than
......
| Standard ID | QC/T 1000.1-2015 (QC/T1000.1-2015) | | Description (Translated English) | Performance requirements and test methods of non-woven on automotive filter. Part 1: Non-woven of filters for passenger compartment | | Sector / Industry | Automobile & Vehicle Industry Standard (Recommended) | | Classification of Chinese Standard | T05 | | Classification of International Standard | 43.02 | | Word Count Estimation | 10,122 | | Date of Issue | 2015-04-30 | | Date of Implementation | 2015-10-01 | | Quoted Standard | GB 6529; GB 8410; GB 18401; GB/T 2912.1; GB/T 2828.1; GB/T 5453; GB/T 7573; GB/T 17592; GB/T 22364; GB/T 23344; GB/T 24218.1; GB/T 24218.2; GB/T 24218.3; QC/T 795.1-2007; QC/T 795.2-2007; HJ/T 324 | | Drafting Organization | Guangzhou Sanli Nonwovens Co. Ltd.; Textile Industry Standardization Institute; China Textiles Industry Association; Bengbu Phoenix filter limited liability company; Dongguan Sato filter Limited; Zhejiang Gimhae Environment Technology Co., Ltd. | | Administrative Organization | National Automotive Standardization Technical Committee | | Regulation (derived from) | Ministry of Industry and Information Technology Announcement (2015 No. 28) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the room air cleaner car ride nonwoven fabric (hereinafter referred to as cloth) classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage. This standard applies to room air cleaner car ride with a non-woven fabric. |
|