JJF 1108-2012 (JJF1108-2012) & related versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
| JJF 1108-2012 | English | 989 |
Add to Cart
|
7 days
|
Calibration Specification for OCTG Thread Working Gauges
|
JJF 1108-2012
| Valid |
JJF 1108-2012
|
| JJF 1108-2003 | English | RFQ |
ASK
|
9 days
|
Calibration Specification for Working Gauge of Rotary Shouldered Connections, Round Thread Casing and Tubing
|
JJF 1108-2003
| Obsolete |
JJF 1108-2003
|
JJF 1108-2012: PDF in English
JJF 1108-2012
Calibration Specification for OCTG Thread Working Gauges
People's Republic of China National Metrology Technical Specifications
Oil thread gauge calibration workload specification
Issued on. 2012-04-17
2012-10-17 implementation
The State Administration of Quality Supervision, Inspection and Quarantine released
Oil thread gauge calibration workload specification
es
Replacing JJF 1108-2003
Focal point. the National Technical Committee of length measuring geometry
The main drafting units. China Institute of Metrology
Participated in the drafting unit. Technical Research Institute of Petroleum Engineering, China Petroleum Group pipe
Baoji City Gem Oil gauge testing center
Chengdu into a tool Group Co., Ltd.
Shanghai Baoshan Iron and Steel Group Corporation Steel Plant
Baoji Petroleum Machinery Co., Ltd.
This specification length measuring geometry commissioned the National Technical Committee is responsible for interpretation
The main drafters of this specification.
Pei Limei (China Institute of Metrology)
Wang farming (China Institute of Metrology)
Drafters participate.
Zun Yi Wei (China Academy of Engineering CNPC OCTG)
Paragraph Xufeng (Baoji Petroleum gauge gem testing center)
Wang Ying (Chengdu into a tool Group Co., Ltd.)
Yuan Lin (Shanghai Baoshan Iron and Steel Group Corporation Steel Plant)
Xiao Jun compartment (Baoji Petroleum Machinery Co., Ltd.)
table of Contents
Introduction (Ⅱ)
1 Scope (1)
2. References (1)
3 Terms (1)
3.1 truncated (1)
4 Overview (1)
5 Metrological characteristics (2)
5.1 rotary shouldered threaded connection workload Regulation metrological characteristics (2)
5.2 round thread casing, tubing and line pipe threads workload Regulation metrological characteristics (2)
5.3 buttress casing thread gauge workload metrological characteristics (2)
6 calibration conditions (3)
6.1 measuring equipment (3)
6.2 Calibration Environment (3)
7 calibration items and calibration methods (3)
7.1 General Inspection (3)
7.2 rotary shouldered threaded connection workload gauge calibration items (3)
7.3 round thread casing, tubing, line pipe thread gauge calibration workload item (4)
7.4 buttress casing thread gauge calibration workload item (5)
7.5 Calibration method (5)
8 calibration process (15)
9 Recalibration interval (15)
Appendix A rotary shouldered connection thread gauge workload measurement requirements (16)
Appendix B round thread casing, tubing, line pipe thread Work Gauge measurement requirements (21)
Appendix C buttress casing thread gauge workload measurement requirements (27)
Appendix D round thread casing, buttress casing, tubing, line pipe threads tightening torque push workload Regulation
Recommended value (31)
Appendix E pitch data processing instance (32)
Appendix F oil thread gauge standoff value transfer Fig. (33)
Appendix G Oil Thread Work Gauge Measurement Uncertainty Example (35)
introduction
This specification reference to the following criteria drafted.
GB/T 22512.2-2008 petroleum and natural gas industries - Rotary drilling equipment - Part 2. rotary shouldered
Processing and measurement threaded connection
APISPEC5B2008年第 version 15 casing, tubing and line pipe threads, measuring and test specification
(SpecificationforThreading, Gauging, andThreadinspectionofCasing, Tubing, and
LinePipeThreads)
The specification for the revision, instead of JJF 1108-2003 "oil drilling connector thread work rules, work round thread casing
For gauge and tubing thread gauge calibration workload specification. "
The main amendments.
--- Increased workload buttress casing thread gauge calibration.
--- Increased workload line pipe thread gauge calibration.
--- Rotary shouldered connections Thread Work Gauge big trail parameters, according to GB/T 22512.2-2008 standard
Quasi been revised.
--- Calibration method of presentation has been revised. Calibration method based on coordinate measuring principle, gives the corresponding
Formula.
--- Reference to GB/T 22512.2 and Thread Work Gauge APISPEC5B use "metering performance requirements"
Moved to Appendix A, B, C in.
Oil thread gauge calibration workload specification
1 Scope
This specification applies to the calibration of rotary shouldered connection thread work regulation, as well as a round thread casing, buttress sleeve
Pipe, tubing, line pipe thread gauge calibration workload.
2. References
This specification refers to the following documents.
JJF 1071-2010 National Calibration Specifications writing rules
GB/T 22512.2 petroleum and natural gas industries - Rotary drilling equipment - Part 2. rotary shouldered thread even
Then processing and measurement
APISPEC5B casing, tubing and line pipe threads processing, measurement and test specification (Specification
forThreading, Gauging, andThreadInspectionofCasing, Tubing, andLinePipe
Threads)
For dated references, only the dated edition applies to this specification; undated reference documents
Member, the latest edition (including any amendments) applies to this specification.
3 Terms
This specification related terms see GB/T 22512.2.
3.1 truncated threadheighttruncated
In the direction perpendicular to the axis of the thread from the thread type from the original vertices of the triangle to the top of the thread profile.
4 Overview
Oil thread (OCTG) are OCTG (oilcountrytubulargoods) threads for short.
According to the close relationship between the transfer from the threaded proofread gauge for determining thread Work Gauge interchange standoff value, thread
Direct to check product compliance workload threads. Thread Work Gauge work includes a threaded plug gauge and thread ring gauges work. screw
Working within the grain product inspection plug thread, thread ring gauge to check the work product external threads.
Depending on the form of thread products, using different thread work rules.
Rotary shouldered threaded connection preferred thread gauge can be divided according to their type of digital type (NC), normal form
(REG), consistent eye type (FH) and the inner flat (IF). Press into right-handed and left-handed rotation.
Casing thread gauge thread is divided according to type round thread casing thread gauge (CSG) and buttress casing screw
Grain gauge (BCSG).
Pipe thread gauge form of the structure is divided into non-upset tubing thread gauge (TBG) and external upset thread gauge
(UPTBG).
Line pipe thread gauge marked. LP.
......
| Standard ID | JJF 1108-2012 (JJF1108-2012) | | Description (Translated English) | Calibration Specification for OCTG Thread Working Gauges | | Sector / Industry | Metrology & Measurement Industry Standard | | Classification of Chinese Standard | A52 | | Classification of International Standard | 17.040 | | Word Count Estimation | 43,413 | | Older Standard (superseded by this standard) | JJF 1108-2003 | | Quoted Standard | JJF 1071-2010; GB/T 22512.2; API SPEC 5B | | Adopted Standard | API SPEC 5B-2008, NEQ | | Drafting Organization | China Institute of Metrology | | Administrative Organization | National Engineering Measurement Technical Committee of Geometrical parameters | | Regulation (derived from) | State Administration of Quality Supervision, Inspection and Quarantine Notice 2012 No. 63; | | Issuing agency(ies) | State Administration of Quality Supervision, Inspection and Quarantine | | Summary | This standard applies to rotary shouldered connection thread workload rules, as well as round thread casing, buttress thread casing, tubing, line pipe thread gauge calibration workload. |
|